journal article·2017-04

Enhanced light absorption and quenched photoluminescence resulting in photoactive poly(3-hexyl-thiophene)-covered ZnO/TiO 2 nanotubes for high light harvesting efficiency

Hua Cai, Xu Yang, Wu Zhang, Hui Li, Yining Qiu, Ning Xu, Jiada Wu, Jian Sun

Publisher page

Abstract

Abstract Organic/inorganic nanocomposites composed of a ploy(3-hexylthiophene) (P3HT) film and TiO 2 nanotubes or ZnO-coated TiO 2 (ZnO/TiO 2 ) nanotubes were fabricated and the influence of the inorganic nanostructures on the optical properties correlated with their photoactivity was studied. The structures of the organic/inorganic nanocomposites were characterized by X-ray diffraction and Raman backscattering spectroscopy. The optical properties were evaluated by measuring the optical absorption and photoluminescence. The TiO 2 nanotubes exhibit anatase structure and the ZnO coating is structured with hexagonal wurtzite. The inorganic nanostructures are fully covered by the P3HT films with some P3HT infiltrating into the lacunas of the one-dimensional nanostructures. The P3HT-covered TiO 2 NTs show strong optical absorption and present evident photoluminescence quenching. Nano-heterostructured ZnO/TiO 2 NTs are superior to nanostructured TiO 2 NTs in composing organic/inorganic nanocomposites with P3HT. The presence of a thin ZnO coating between the P3HT film and the TiO 2 nanotubes further increases light absorption and quenches photoluminescence, revealing efficient generation of excitons by optical excitation and suppression of radiative recombination of photo-generated excitons, and suggesting that the organic/inorganic nanocomposite P3HT-covered ZnO/TiO 2 nanotubes exhibits high photoactivity and an enhanced light harvesting efficiency can be anticipated. The temperature-dependent photoluminescence was also measured for an examination of π-stacking aggregation and a discussion of exciton coupling in P3HT at different temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. InP nanowire/polymer hybrid photodiode10.1021/nl072372c ↗
2. High-performance organic-inorganic hybrid photodetectors based on P3HT: CdSe nanowire heterojunctions on rigid and flexible substrates10.1002/adfm.201201786 ↗
3. High-performance nanostructured inorganic-organic heterojunction solar cells10.1021/nl101322h ↗
4. ZnO-TiO2 core-shell nanorod/P3HT solar cells10.1021/jp077593l ↗
5. Efficient photochemical water splitting by a chemically modified n-TiO210.1126/science.1075035 ↗
6. Use of highly-ordered TiO2 nanotube arrays in dye-sensitized solar cells10.1021/nl052099j ↗
7. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
8. Investigation of electrical transport in anodized single TiO2 nanotubes10.1063/1.4789763 ↗
9. Surface engineered angstrom thick ZnO-sheathed TiO2 nanowires as photoanodes for performance enhanced dye-sensitized solar cells10.1039/C4TA03445G ↗
10. Selective isolation of the electron or hole in photocatalysis: ZnO−TiO2 and TiO2−ZnO core−shell structured heterojunction nanofibers via electrospinning and atomic layer deposition10.1039/c3nr06665g ↗
11. Optimization of 1D ZnO@TiO2 core−shell nanostructures for enhanced photoelectrochemical water splitting under solar light illumination10.1021/am501379m ↗
12. Conveniently fabricated heterojunction ZnO/TiO2 electrodes using TiO2 nanotube arrays for dye-sensitized solar cells10.1016/j.jpowsour.2012.07.097 ↗
13. ZnO-coated TiO2 nanotube arrays for a photoelectrode in dye-sensitized solar cells10.1007/s11664-013-2908-1 ↗
14. Enhanced photoelectrochemical activity of ZnO-coated TiO2 nanotubes and its dependence on ZnO coating thickness10.1186/s11671-016-1309-9 ↗
15. Visible light-driven photoelectrochemical water splitting on ZnO−TiO2 heterogeneous nanotube photoanodes10.1007/s10800-015-0836-x ↗
16. Influence of Al doping on the properties of ZnO thin films grown by atomic layer deposition10.1021/jp2023567 ↗
17. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
18. Semicrystalline morphology in thin films of poly(3-hexylthiophene)10.1007/s00396-004-1100-9 ↗
19. The effect of solvatochromism on the interfacial morphology of P3HT-CdS nanowire nanohybrids10.1021/nl401700a ↗
20. Air processed P3HT:PCBM photovoltaic cells: morphology correlation to annealing, degradation, and recovery10.1002/polb.23605 ↗
21. Raman spectrum of anatase, TiO210.1002/jrs.1250070606 ↗
22. Phase transformation and particle growth in nanocrystalline anatase TiO2 films analyzed by X-ray diffraction and Raman spectroscopy10.1016/j.susc.2007.04.127 ↗
23. uv resonant Raman scattering in ZnO10.1103/PhysRevB.2.1209 ↗
24. Well-aligned ZnO nanowire arrays fabricated on silicon substrates10.1002/adfm.200305074 ↗
25. Low-temperature synthesis of ZnO nanoparticles by solid-state pyrolytic reaction10.1088/0957-4484/14/1/303 ↗
26. SERS spectra of poly(3-hexylthiophene) in oxidized and unoxidized states10.1002/(SICI)1097-4555(199809)29:9<825::AID-JRS309>3.0.CO;2-2 ↗
27. The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT: PCBM blend thin films10.1021/ja2013104 ↗
28. Chain ordering of regioregular polythiophene films through blending with a nickel bisdithiolene complex10.1063/1.4868106 ↗
29. The nature of in-plane skeleton raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films10.1021/ja2013104 ↗
30. Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: mapping morphology-dependent aggregated and unaggregated C=C species10.1021/ja900636z ↗
31. Photoexcitation dynamics in regioregular and regiorandom polythiophene films10.1103/PhysRevB.64.235122 ↗
32. Determining exciton coherence from the photoluminescence spectral line shape in poly (3-hexylthiophene) thin films10.1063/1.3076079 ↗
33. Role of intermolecular coupling in the photophysics of disordered organic semiconductors: aggregate emission in regioregular polythiophene10.1103/PhysRevLett.98.206406 ↗
34. High-performance field-effect transistors based on polystyrene-b-poly (3-hexylthiophene) diblock copolymers
35. One-dimensional core/shell structured TiO2/ZnO heterojunction for improved photoelectrochemical performance10.5012/bkcs.2012.33.7.2200 ↗
36. Deibel · Phys. Rev. B · 2010 · 81 · 08520210.1103/PhysRevB.81.085202 ↗
37. Electroabsorption spectroscopy of luminescent and nonluminescent π-conjugated polymers10.1103/PhysRevB.56.15712 ↗
38. Calculation of excitonic properties of conjugated polymers using the Bethe–Salpeter equation10.1063/1.1356015 ↗
39. J-Aggregate behavior in Poly-3-hexylthiophene nanofibers10.1021/jz201509h ↗
40. Effect of Polymer Chain Folding on the Transition from H- to J-Aggregate Behavior in P3HT Nanofibers10.1021/jp411668g ↗
41. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
42. Work function modification in P3HT H/J aggregate nanostructures revealed by Kelvin probe force microscopy and photoluminescence imaging
43. The influence of solid-state microstructure on the origin and yield of long-lived photogenerated charge in neat semiconducting polymers10.1002/polb.22379 ↗
44. A study on the correlation between structure and hole transport in semi-crystalline regioregular P3HT10.1002/aenm.201200509 ↗
45. Effect of polymer chain folding on the transition from H- to J-aggregate behavior in P3HT nanofibers10.1021/jp411668g ↗