journal article·2024-10

Study on CaO-based materials derived from steel slag for solar-driven thermochemical energy storage

Wenjie Li, Erfei Xiao, Chenguang Li, Chaopeng Zhang, Xin Guo

Publisher page

Abstract

The calcium looping (CaL) technique, renowned for its exceptional ability to withstand high temperatures and remarkable heat storage capacity, perfectly complements 3rd generation concentrated solar power (CSP) plants. However, the poor cycling stability and low spectrum absorption rate of CaO obstruct system efficiency. In order to tackle these problems, we impregnated steel slag with acetic acid and doped Mn to create a novel CaO-based energy storage material. Thermogravimetric analysis (TGA) and fixed-bed cycling of the material revealed that the material has outstanding cyclic heat storage properties. Compared to CaO, the material has an 85 % higher initial adsorption rate, 73 % higher 30-cycle energy storage density, and 9.5 times higher average light absorption. Spherical pellets were prepared for industrial applications through the extrusion-spheronization method. The energy storage density for 30 cycles was reduced by 10.26 % for the pellets compared to the powder material, but the average light absorption rate was improved. The compressive strength of the composite pellets was 8.4 times higher than the dolomite pellets. It was found that the light absorption capacity of the material increased with the number of cycles, which was attributed to the migration of Mn and Mg from the interior to the surface. Finally, the excellent photothermal conversion capability of the new composite material was verified by the photothermal conversion test. Therefore, Mn-doped CaO-based composite material derived from steel slag is promising for application in the next-generation CaL-CSP system.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and Cooling Systems · Chemical Looping and Thermochemical Processes · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. SiC/Mn co-doped CaO pellets with enhanced optical and thermal properties for calcium looping thermochemical heat storage10.1016/j.cej.2021.130305 ↗
2. Renewable energy sources as a new participant in ancillary service markets10.1016/j.esr.2017.09.009 ↗
3. Thermochemical heat storage performances of fluidized black CaCO3 pellets under direct concentrated solar irradiation10.1016/j.renene.2021.07.026 ↗
4. Technical challenges and opportunities for concentrating solar power with thermal energy storage10.1115/1.4024143 ↗
5. Calcium-based composites for direct solar-thermal conversion and thermochemical energy storage10.1016/j.cej.2019.122815 ↗
6. System analysis of central receiver concepts with high temperature thermal energy storages: receiver technologies and storage cycles10.1063/1.4984489 ↗
7. Insight into the viscosity enhancement ability of Ca(NO3)2 on the binary molten nitrate salt: a molecular dynamics simulation study10.1016/j.cej.2018.09.190 ↗
8. Modified Ca-Looping materials for directly capturing solar energy and high-temperature storage10.1016/j.ensm.2019.09.006 ↗
9. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl2-MgCl2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
10. Calcium-Looping performance of steel and blast furnace slags for thermochemical energy storage in concentrated solar power plants10.1016/j.jcou.2017.09.021 ↗
11. Enhanced CO2 capture by biomass-templated Ca(OH)2-based pellets10.1016/j.cej.2015.03.041 ↗
12. Calcium looping sorbents for CO2 capture10.1016/j.apenergy.2016.07.074 ↗
13. Enhancement of hydrogen sorption in magnesium hydride using expanded natural graphite10.1016/j.ijhydene.2009.07.112 ↗
14. Self-assembly CuO surface decorated with NiAl2O4 for high-temperature thermochemical energy storage: excellent performance and strong interaction mechanism10.1016/j.est.2022.106370 ↗
15. Application of lithium orthosilicate for high-temperature thermochemical energy storage10.1016/j.apenergy.2017.02.029 ↗
16. Hybrid solar power plant with thermochemical energy storage: a multi-objective operational optimisation10.1016/j.enconman.2019.112421 ↗
17. Optimizing the CSP-calcium looping integration for thermochemical energy storage10.1016/j.enconman.2016.12.093 ↗
18. Supercritical carbon dioxide solar thermal power generation—overview of the Technology and microchannel receiver development
19. An analysis of the costs and opportunities for concentrating solar power in Australia10.1016/j.renene.2013.02.020 ↗
20. Calcium-based composites directly irradiated by solar spectrum for thermochemical energy storage10.1016/j.cej.2022.140986 ↗
21. Process integration of Calcium-Looping thermochemical energy storage system in concentrating solar power plants10.1016/j.energy.2018.04.180 ↗
22. Towards solar thermochemical carbon dioxide capture via calcium oxide looping: a review10.4209/aaqr.2013.05.0169 ↗
23. Supercritical CO2 Brayton cycle: a state-of-the-art review10.1016/j.energy.2019.115900 ↗
24. Synthesis of highly efficient CaO-based, self-stabilizing CO 2 sorbents via structure-reforming of steel slag10.1021/acs.est.5b00244 ↗
25. Thermochemical heat storage and optical properties of red mud/Mn co-doped high alumina cement-stabilized carbide slag in CaO/CaCO3 cycles10.1016/j.fuproc.2022.107419 ↗
26. Utilization of lime mud from paper mill as CO2 sorbent in calcium looping process10.1016/j.cej.2013.01.068 ↗
27. Optimizing synergy between phosphogypsum disposal and cement plant CO2 capture by the calcium looping process
28. Thermochemical energy storage performances of steel slag-derived CaO-based composites10.1002/ceat.202000173 ↗
29. Comprehensive utilization of steel slag: a review10.1016/j.powtec.2023.118449 ↗
30. World Steel in Figures 2023 - worldsteel.org, (n.d.). https://worldsteel.org/steel-topics/statistics/world-steel-in-figures-2023/(accessed December 15, 2023).
31. Recovery of calcium and magnesium bearing phases from iron– and steelmaking slag for CO2 sequestration10.1016/j.psep.2019.12.012 ↗
32. Acidification optimization and granulation of a steel‐slag‐derived sorbent for CO 2 capture10.1002/ceat.201700573 ↗
33. Performance of steel slag in carbonation–calcination looping for CO 2 capture from industrial flue gas10.1039/C3RA47426G ↗
34. Optimized design of Ca-based thermochemical heat storage materials for concentrated solar power10.1016/j.est.2021.103236 ↗
35. Dark calcium carbonate particles for simultaneous full-spectrum solar thermal conversion and large-capacity thermochemical energy storage10.1016/j.solmat.2019.110364 ↗
36. Dolomite-derived composites doped with binary ions for direct solar thermal conversion and stabilized thermochemical energy storage10.1016/j.solmat.2022.111659 ↗
37. Synergy of Li2CO3 promoters and Al-Mn-Fe stabilizers in CaCO3 pellets enables efficient direct solar-driven thermochemical energy storage
38. Blackened calcium-based composite particles and their apparent kinetics features for solar thermochemical energy storage10.1002/aic.17546 ↗
39. Comparative investigation on thermochemical energy storage stability of Zr/Al-supported dark CaO-based composites under harsh energy storage mode10.1016/j.ccst.2022.100076 ↗
40. Evaluation of thermochemical energy storage performance of Fe-/Mn-doped, Zr-stabilized, CaO-based composites under different thermal energy storage modes10.1021/acsaem.2c00303 ↗
41. Effects of preparation methods on the structure and property of Al-stabilized CaO-based sorbents for CO 2 capture10.1016/j.fuproc.2018.02.005 ↗
42. Mn and Mg synergistically stabilized CaO as an effective thermochemical material for solar energy storage10.1016/j.solmat.2023.112202 ↗
43. Development of synthetic CaO sorbents via CTAB-assisted sol–gel method for CO2 capture at high temperature10.1016/j.cej.2013.10.023 ↗
44. Microscopic mechanisms of Mn-doped CaCO3 heat carrier with enhanced optical absorption and accelerated decomposition kinetics for directly storing solar energy10.1016/j.solmat.2022.112103 ↗
45. Mechanism for self-reactivation of nano-CaO-based CO2 sorbent in calcium looping10.1016/j.fuel.2014.11.004 ↗
46. Preparation of MgO-coated nano CaO using adsorption phase reaction technique for CO2 sorption10.1039/C6RA05452H ↗
47. Enhanced CO2 capture capacity of limestone by discontinuous addition of hydrogen chloride in carbonation at calcium looping conditions10.1016/j.cej.2017.01.127 ↗
48. Decorating CaO with dark Ca2MnO4 for direct solar thermal conversion and stable thermochemical energy storage10.1016/j.solmat.2022.111977 ↗
49. Manganese/iron, manganese/nickel, and manganese/silicon oxides used in chemical-looping with oxygen uncoupling (CLOU) for combustion of methane10.1021/ef9005466 ↗
50. Thermochemical heat storage performance of CaO pellets fabricated by extrusion–spheronization under harsh calcination conditions10.1021/acs.energyfuels.0c00644 ↗
51. Investigation of Y2O3/MgO-modified extrusion–spheronized CaO-based pellets for high-temperature CO2 capture10.1002/apj.2366 ↗