Development of correlations of Nusselt number and friction factor of solar thermal collector equipped with hybrid rib roughness
Source abstract
Abstract
In this advanced and comprehensive research, a pioneering hybrid rib configuration, amalgamating arc and V-shaped ribs, is precisely engineered to delve into the complex synergistic effects between this cutting-edge rib design and the heat transfer and fluid flow behavior within a solar thermal collector (STC) specifically utilized for direct air heating. The focal point of this investigation is the impact of the rib pattern on pivotal performance indicators, notably the Nusselt number (Nu) and the friction factor (f). This specific rib roughness design emanates from an exhaustive analysis of a spectrum of non-dimensional roughness parameters: the arc angle (α), the attack angle (β), the relative positioning of the V ribs (D/w), the relative spacing of the ribs (p/e), and the rib height (e/D). These parameters are studied within defined ranges: 3 0 ̊ ‐ 6 0 ̊ , 3 0 ̊ ‐ 6 0 ̊ , 0.2–1, 8–12, and 0.023–0.043, respectively. The results of highlight a significant improvement in heat transport, as indicated by a significant increase in the Nusselt number (Nu), which has risen impressively by a factor of 3.08. Furthermore, this paper presents development of correlations for Nu and f, taking into account the roughness parameters of the hybrid ribs and the flow Reynolds number, in order to precisely forecast these key performance measurements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Heat Transfer Mechanisms · Tribology and Lubrication Engineering · Fluid Dynamics and Turbulent Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A design procedure for solar air heating systems10.1016/0038-092X(77)90106-2 ↗
2. Use of turbulators for heat transfer augmentation in an air duct – a review10.1016/j.renene.2013.08.024 ↗
3. Heat and flow characteristics of air heater ducts provided with turbulators—a review10.1016/j.rser.2013.11.050 ↗
4. Use of turbulators for heat transfer augmentation in an air duct - a review10.1016/j.renene.2013.08.024 ↗
5. Effect of artificial roughness on heat transfer and friction factor in a solar air heater10.1016/0038-092X(88)90058-8 ↗
6. Optimal thermohydraulic performance of artficially roughened solar air heaters
7. Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness10.1016/j.solener.2008.05.010 ↗
8. Performance analysis of W-shaped rib roughened solar air heater10.1063/1.3595740 ↗
9. Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate10.1016/S0017-9310(02)00046-7 ↗
10. Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates10.1016/0038-092X(93)90039-Q ↗
11. Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped ribs on the absorber plate10.1016/j.energy.2015.07.069 ↗
12. Numerical investigation of heat transfer enhancement in a solar air heater roughened by multiple V-shaped ribs10.1016/j.renene.2018.11.016 ↗
13. Performance study of solar air heater having v-down discrete ribs on absorber plate10.1016/j.energy.2013.03.068 ↗
14. Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness10.1016/j.solener.2005.08.006 ↗
15. Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness10.1016/j.solener.2005.08.006 ↗
16. Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators10.1016/j.ijheatmasstransfer.2007.02.042 ↗
17. Heat transfer augmentation in solar heat exchanger duct with louver-punched V-baffles10.1016/j.solener.2022.11.009 ↗
18. Experimental and numerical thermal performance in solar receiver heat exchanger with trapezoidal louvered winglet and wavy groove10.1016/j.solener.2022.02.052 ↗
19. Investigation of thermal performance of solar air heater having roughness elements as a combination of inclined and transverse ribs on the absorber plate10.1016/j.renene.2007.07.013 ↗
20. Experimental investigation on heat-transfer enhancement due to a gap in an inclined continuous rib arrangement in a rectangular duct of solar air heater10.1016/j.renene.2007.03.023 ↗
21. Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters10.1016/j.energy.2008.02.017 ↗
22. Enhancing thermo-hydraulic performance of solar air collectors through three-dimensional airflow using novel artificial roughness designs10.1016/j.jtice.2024.105403 ↗
23. Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate10.1016/j.energy.2011.03.054 ↗
24. Experimental investigation of enhanced heat transfer and pressure drop in a solar air heater duct with discretized broken V-rib roughness10.1115/1.4028071 ↗
25. Effect of gap position in broken V-rib roughness combined with staggered rib on thermohydraulic performance of solar air heater
26. Experimental investigation on heat transfer and fluid flow characteristics of air flow in a rectangular duct with Multi v-shaped rib with gap roughness on the heated plate10.1016/j.solener.2012.03.014 ↗
27. Thermo-hydraulic and exergy analysis of inclined impinging jets on absorber plate of solar air heater10.1016/j.renene.2021.07.013 ↗
28. Experimental heat transfer and friction in channels roughened with angled, V-shaped, and discrete ribs on two opposite walls10.1115/1.2836602 ↗
29. Heat transfer and friction characteristics of solar air heater ducts having integral inclined discrete ribs on absorber plate10.1016/j.ijheatmasstransfer.2009.05.032 ↗
30. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with broken arc ribs10.1016/j.expthermflusci.2016.07.022 ↗
31. Investigation on performance enhancement due to staggered piece in a broken arc rib roughened solar air heater duct
32. S. 93-97. ASHRAE, Method of testing to determine the thermal performance of solar
33. Performance improvement of solar air heater duct-employing rib roughness on absorber: an experimental study
34. Holman · 2004
35. Rosenhow · 1973
36. Kakac · 1987