journal article·2024-07

Effect of nucleating agents on crystalline silicon textured structure: From upright pyramid to analogous inverted pyramid

Zongheng Sun, Wei Chen, Yiwen Zhang, Yaoping Liu, Xiaolong Du

Publisher page

Abstract

For further improving the efficiency of solar cells, it is one of the mainstream approaches to obtain a novel textured surface structure with lower reflectivity, without affecting the existing industry processes. However, the current rapid texturing methods used in the industry can only achieve an upright pyramid structure. This study first analyzed how the rapid texturing process is achieved through texturing additives. Subsequently, based on this principle, we investigated the core component of the texturing additives—nucleating agent—and examined how its concentration influences the surface structure, leading to the development of an analogous inverted pyramid structure with advantageous reflectivity. To remove the damage layer generated at the top edges of the analogous inverted pyramid due to insufficient etching, a two-step texturing process was proposed. This process aims to protect the structure while effectively removing the damage layer. Ultimately, we applied the two-step texturing process to fabricate heterojunction solar cells with the analogous inverted pyramid textured surface, achieving an efficiency of 25.43 %, which is 0.19 % higher than conventional upright pyramid structure cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Improved anisotropic etching process for industrial texturing of silicon solar cells10.1016/S0927-0248(98)00180-9 ↗
2. A novel low cost texturization method for large area commercial mono-crystalline silicon solar cells10.1016/j.solmat.2006.06.044 ↗
3. 18.87%-efficient inverted pyramid structured silicon solar cell by one-step Cu-assisted texturization technique10.1016/j.solmat.2017.03.017 ↗
4. Improving the performance of PERC silicon solar cells by optimizing the surface inverted pyramid structure on large-area mono-crystalline silicon wafers10.1016/j.mssp.2021.106281 ↗
5. Fabrication of inverted pyramid structure for high-efficiency silicon solar cells using metal assisted chemical etching method with CuSO4 etchant10.1016/j.solmat.2021.111200 ↗
6. Silicon nanowire solar cells10.1063/1.2821113 ↗
7. Light trapping in silicon nanowire solar cells10.1021/nl100161z ↗
8. Design and fabrication of silicon nanowires towards efficient solar cells10.1016/j.nantod.2016.10.001 ↗
9. All-back-contact ultra-thin silicon nanocone solar cells with 13.7% power conversion efficiency10.1038/ncomms3950 ↗
10. Broadband omnidirectional anti-reflection property of V-groove textured silicon10.1016/j.solener.2019.09.048 ↗
11. The surface texturization of solar cells: a new method using V-grooves with controllable sidewall angles10.1016/0927-0248(92)90126-A ↗
12. Inverted pyramid structures fabricated on monocrystalline silicon surface with a NaOH solution10.1016/j.heliyon.2023.e23871 ↗
13. Characterization of 23-percent efficient silicon solar cells10.1109/16.46361 ↗
14. Surface texturing of single-crystalline silicon solar cells using low density SiO2 films as an anisotropic etch mask10.1016/j.solmat.2010.06.026 ↗
15. Fabrication of inverted pyramid structure by cesium chloride self-assembly lithography for silicon solar cell10.1016/j.mssp.2015.05.048 ↗
16. Influence of textured c-Si surface morphology on the interfacial properties of heterojunction silicon solar cells10.1016/j.jnoncrysol.2011.12.106 ↗
17. Selective rounding for pyramid peaks and valleys improves the performance of SHJ solar cells10.1002/ese3.900 ↗