journal article·2024-03Open access

Water-based organic solar cells from Janus nanoparticles: Closing the performance gap with reference cells

Alexandre Holmes, Hugo Laval, Elise Deniau, Marc Schmutz, Sylvie Blanc, Guillaume Wantz, Sylvain Chambon, Christine Lartigau-Dagron, Antoine Bousquet

Abstract

P3HT:PC61BM Janus nanoparticles prepared through nanoprecipitation were integrated in inverted solar cells with three different surfactants: an anionic (SDS), a cationic (C16TAB) and a neutral (pluronic F127). An investigation of the properties at the dispersed state showed no difference between all the surfactants. A thermogravimetric titration method was developed to calculate the residual amount of surfactant in the dispersions. The higher residual content of surfactant in the dispersions resulted in lower electronical properties. The optimum balance was found with SDS, showing the lower surfactant quantity required to achieve nanoparticle stabilisation (10%W), resulting in the minimum amount of insulating molecule in the active layer (PCE = 1.7 %).A systematic comparison is made, between a reference system, solar cells made from a o-dichlorobenzene solution of the active materials (power conversion efficiency (PCE) = 3.2 %). Atomic force microscopy revealed that best performances were linked to the complete sintering of the nanoparticles and an optimisation of the film morphology. While PC61BM aggregation was identified for SDS-based solar cells, a less pronounced aggregation was observed for pluronic F127. To solve this issue, we demonstrated that a slight addition of Pluronic F127 (4%w) in SDS-stabilised dispersion prior to processing the active layer not only ensured a better film formation, but avoided the PC61BM aggregation. As a result, a significant improvement of efficiencies was achieved (PCE = 2.44 %) approaching the reference solar cell efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. The future of organic photovoltaics10.1039/C4CS00227J ↗
2. Light harvesting for organic photovoltaics10.1021/acs.chemrev.6b00215 ↗
3. Efficient polymer solar cells based on non-fullerene acceptors with potential device lifetime approaching 10 years10.1016/j.joule.2018.09.001 ↗
4. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
5. Eco-Friendly polymer solar cells: advances in green-solvent processing and material design10.1021/acsnano.0c07488 ↗
6. Review of waterborne organic semiconductor colloids for photovoltaics10.1021/acsnano.0c10161 ↗
7. Water−Processed organic solar cell with efficiency exceeding 1110.3390/polym14194229 ↗
8. Ferroelectric polymer drives performance enhancement of non‐fullerene organic solar cells10.1002/anie.202202177 ↗
9. Nano-pathways: bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics10.1016/j.nanoen.2015.11.021 ↗
10. The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devices10.1016/j.nanoen.2013.03.009 ↗
11. Organic semiconductor colloids: from the knowledge acquired in photovoltaics to the generation of solar hydrogen fuel10.1016/j.cocis.2021.101511 ↗
12. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
13. Effect of donor-acceptor vertical composition profile on performance of organic bulk heterojunction solar cells10.1038/s41598-018-27868-2 ↗
14. High performance as-cast P3HT:PCBM devices: understanding the role of molecular weight in high regioregularity P3HT10.1039/D0MA00738B ↗
15. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
16. Single nanoparticle of organic p-type and n-type hybrid materials: nanoscale phase separation and photovoltaic effect10.1039/C1JM13952E ↗
17. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
18. The effect of mesomorphology upon the performance of nanoparticulate organic photovoltaic devices10.1016/j.solmat.2015.02.028 ↗
19. The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices10.1016/j.solmat.2017.09.007 ↗
20. Sulfonated thiophene derivative stabilized aqueous poly(3-hexylthiophene):phenyl-C 61 -butyric acid methyl ester nanoparticle dispersion for organic solar cell applications10.1021/acsami.8b15589 ↗
21. Enhanced photocatalytic hydrogen evolution from organic semiconductor heterojunction nanoparticles10.1038/s41563-019-0591-1 ↗
22. Surfactant engineering and its role in determining the performance of nanoparticulate organic photovoltaic devices10.1021/acsomega.1c05711 ↗
23. Fabrication conditions for efficient organic photovoltaic cells from aqueous dispersions of nanoparticles10.1039/C4RA07463G ↗
24. Multiscale active layer morphologies for organic photovoltaics through self-assembly of nanospheres10.1021/nl502209s ↗
25. Influence of fullerene ordering on the energy of the charge-transfer state and open-circuit voltage in polymer:fullerene solar cells10.1021/jp110982m ↗
26. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
27. Correlation between spectroscopic and morphological properties of composite P3HT/PCBM nanoparticles studied by single particle spectroscopy10.1016/j.jlumin.2009.11.031 ↗
28. PCBM concentration dependent morphology of P3HT in composite P3HT/PCBM nanoparticles10.1016/j.cplett.2009.05.066 ↗
29. Charge trapping and storage by composite P3HT/PC 60 BM nanoparticles investigated by fluorescence-voltage/single particle spectroscopy10.1021/ja207244z ↗
30. Surfactant-free nanoparticulate organic photovoltaics10.1016/j.solmat.2013.10.010 ↗
31. Darwis · 2011 · 120
32. Janus organic semiconductor nanoparticles prepared by simple nanoprecipitation, Mater
33. High yield synthesis of water‐processable donor:acceptor Janus nanoparticles with tuned internal morphology and highly efficient charge separation/transfer10.1002/adom.202101922 ↗
34. Microfluidics: continuous‐flow synthesis of nanoparticle dispersions for the fabrication of organic solar cells10.1002/admt.202200297 ↗
35. Universal selection rule for surfactants used in miniemulsion processes for eco-friendly and high performance polymer semiconductors10.1039/C7EE01943B ↗
36. Effect of surfactant conjugation on structure and properties of poly(3-hexylthiophene) colloids and field effect transistors10.1016/j.colsurfa.2015.10.002 ↗
37. Overcoming efficiency and stability limits in water-processing nanoparticular organic photovoltaics by minimizing microstructure defects10.1038/s41467-018-07807-5 ↗
38. Structured nanoparticles from the self-assembly of polymer blends through rapid solvent exchange10.1021/acs.langmuir.7b00291 ↗
39. Nanoprecipitation process: from encapsulation to drug delivery10.1016/j.ijpharm.2017.08.064 ↗
40. Polymeric solar cells based on P3HT:PCBM: role of the casting solvent10.1016/j.solmat.2011.07.039 ↗
41. Environmentally friendly preparation of nanoparticles for organic photovoltaics10.1016/j.orgel.2018.05.040 ↗
42. Building intermixed donor–acceptor architectures for water-processable organic photovoltaics10.1039/C8CP07137C ↗
43. Aqueous nanoparticle polymer solar cells: effects of surfactant concentration and processing on device performance10.1021/acsami.7b00557 ↗
44. Solution-processed small-molecule bulk heterojunctions: leakage currents and the dewetting issue for inverted solar cells10.1021/acsami.5b06964 ↗
45. Thermal stabilisation of polymer-fullerene bulk heterojunction morphology for efficient photovoltaic solar cells10.1002/adma.201401062 ↗
46. Control of self-assembly by charge-transfer complexation between C 60 fullerene and electron donating units of block copolymers10.1021/ma061165g ↗
47. Self-assembly of poly(diethylhexyloxy- p -phenylenevinylene)- b - poly(4-vinylpyridine) Rod−Coil block copolymer systems10.1021/ma0710885 ↗
48. Fullerene bisadduct as an effective phase-separation inhibitor in preparing poly(3-hexylthiophene)–[6,6]-phenyl-C61-butyric acid methyl ester blends with highly stable morphology
49. Role of the donor material and the donor–acceptor mixing ratio in increasing the efficiency of Schottky junction organic solar cells10.1016/j.orgel.2013.06.001 ↗
50. The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in polymer : fullerene bulk heterojunction solar cells: photocurrent generation by charge-transfer absorption10.1002/adfm.200800056 ↗
51. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
52. Toward high efficiency water processed organic photovoltaics: controlling the nanoparticle morphology with surface energies