WAlSiN-based solar-selective coating stability-study under heating and cooling cycles in vacuum up to 800 °C using in situ Rutherford backscattering spectrometry and spectroscopic ellipsometry
Source abstract
Abstract
In situ Rutherford backscattering spectrometry (RBS) and spectroscopic ellipsometry (SE) were applied to study the compositional and optical stability of a WAlSiN-based solar-selective coating (SSC) at high temperatures in vacuum. The samples were exposed to heating-cooling cycles between quasi room temperature and stepwiseincreased high temperatures of 450 ◦C, 650 ◦C and 800 ◦C, respectively. In situ RBS revealed full compositional stability of the SSC during thermal cycling. In situ SE indicated full conservation of the optical response at 450 ◦C and 650 ◦C, and minimal changes at 800 ◦C. The analysis of the ex situ optical reflectance spectra after the complete thermal cycling gave an unchanged solar absorptance of 0.94 and a slightly higher calculated thermal emittance at 800 ◦C of 0.16 compared to 0.15 after deposition. Cross-sectional element distribution analysis performed in scanning transmission electron microscopy mode confirmed the conservation of the SSC microstructure after the heating – cooling cycles. The study demonstrates compositional, optical and structural stability of the WAlSiN-based solar-selective coating at temperatures targeted for the next generation of concentrated solar power plants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · GaN-based semiconductor devices and materials · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Chapter 13: solar selective coatings and materials for high-temperature solar thermal applications
2. Historical development of concentrating solar power technologies to generate clean electricity efficiently – a review10.1016/j.rser.2014.09.008 ↗
3. Solar energy – concentrating solar power
4. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
5. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
6. Coatings for concentrating solar systems - a review10.1016/j.rser.2015.01.015 ↗
7. Kennedy · 2002
8. Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN–CrAlON based tandem absorber10.1016/j.solmat.2015.02.010 ↗
9. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
10. Adhesion and structural stability enhancement for Ag layers deposited on steel in selective solar coatings technology10.1016/j.surfcoat.2014.02.045 ↗
11. AlMoN based spectrally selective coating with improved thermal stability for high temperature solar thermal applications10.1016/j.solener.2015.06.047 ↗
12. Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON layers10.1016/j.solmat.2015.01.029 ↗
13. Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO 2 solar selective absorbing coating10.1016/j.solmat.2017.04.017 ↗
14. A design of selective solar absorber for high temperature applications10.1016/j.solener.2018.04.052 ↗
15. Enhanced thermal stability of solar selective absorber based on nano-multilayered AlCrSiO films
16. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1−y(OxN1−x). Part 1: Advanced microstructural characterization and optical simulation10.1016/j.solmat.2017.10.015 ↗
17. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 2: experimental validation and durability tests at high temperature10.1016/j.solmat.2018.04.027 ↗
18. Solar selective performance of metal nitride/oxynitride based magnetron sputtered thin film coatings: a comprehensive review10.1088/2040-8986/aaa2c5 ↗
19. Kennedy · 2012 · 4
20. Transparent conductive tantalum doped tin oxide as selectively solar-transmitting coating for high temperature solar thermal applications10.1016/j.solmat.2019.03.012 ↗
21. Cluster tool for in situ processing and comprehensive characterization of thin films at high temperatures10.1021/acs.analchem.8b00923 ↗
22. Krause · 2021
23. Extremely high temperature stable nanometric scale multilayer spectrally selective absorber coating: emissivity measurements at elevated temperatures and a comprehensive study on ageing mechanism10.1016/j.solmat.2020.110905 ↗
24. Performance evaluation and durability studies of W/WAlSiN/SiON/SiO2 based spectrally selective solar absorber coating for high-temperature applications: a comprehensive study on thermal and solar accelerated ageing10.1016/j.solener.2021.09.026 ↗
25. Dresden-Rossendorf, HZDR. User facilities at the Ion Beam Center., (n.d.). https://www.hzdr.de/db/Cms?pOid=29003&pNid=1984.
26. Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region10.1016/j.apsusc.2019.143651 ↗
27. Simulated annealing analysis of Rutherford backscattering data10.1063/1.119524 ↗
28. Wagner
29. Tompkins · 2015
30. Jean · 1998 · vol. III
31. N-W binary phase diagram 30-100 at.% W: datasheet from “PAULING FILE multinaries edition – 2012” in SpringerMaterials
32. Next generation of concentrated solar power technologies