journal article·2023-03Open access

Environmental performance of Kesterite monograin module production in comparison to thin-film technology

Amani Maalouf, Tobechi Okoroafor, Stefan Gahr, Kaia Ernits, Dieter Meissner, Shahaboddin Resalati

Abstract

Kesterite-based structures are being extensively studied for solar module productions due to their earth abundant and nontoxic nature, high absorption coefficient, and a wide variety of scalable deposition methods. Kesterites are mostly manufactured using thin-film technology. However, in the last decade, the monograin approach has gained further attention, providing a third alternative to mono-crystalline wafer and thin film methods. This is due to its high throughput, low-cost deposition techniques, flexibility, and light weight. Despite the technical advancements in the monograin technology, their environmental impacts have not been studied in the literature. This paper, for the first time, presents a cradle to gate environmental life cycle assessment of CZTS monograin module production. The analysis is designed to identify the environmental hotspots associated with materials, energy usage, and manufacturing processes. The results were compared to CZTS thin-film and the commercially available CIGS technologies. The analyses suggested that the front contact accounted for the majority of impact in all categories due to the use of silver. The normalisation results showed that the marine aquatic ecotoxicity impact category dominated the overall impact results. A comparison of CZTS monograin and thin film production demonstrated that monograin outperformed the thin film technology when silver was substituted with alternative materials and was proximate to CIGS even considering their higher achieved efficiency. The analysis presents considerable environmental benefits associated with the monograin technology. Further savings in emissions could be achieved with improved conversion efficiency and usage of renewable energy sources in the manufacturing stages.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic Systems and Sustainability · Chalcogenide Semiconductor Thin Films · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. 2019
2. Weckend · 2016
3. Global status of recycling waste solar panels: a review10.1016/j.wasman.2018.01.036 ↗
4. An overview of solar photovoltaic panels' end-of-life material recycling10.1016/j.esr.2019.100431 ↗
5. CZTS monograin powders and thin films10.4028/www.scientific.net/AMR.222.8 ↗
6. Reduced recombination through the CZTS/CdS interface engineering in monograin layer solar cells10.1088/2515-7655/ac618d ↗
7. A review of CZTS thin film solar cell technology10.37934/arfmts.81.1.7387 ↗
8. Perovskite solar cells: an integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies10.1016/j.rser.2017.05.095 ↗
9. Progress in major thin-film solar cells: Growth technologies, layer materials and efficiencies
10. Status review and the future prospects of CZTS based solar cell–A novel approach on the device structure and material modeling for CZTS based photovoltaic device10.1016/j.rser.2018.06.008 ↗
11. Stability, reliability, upscaling and possible technological applications of kesterite solar cells
12. Mellikov · 2015 · 239
13. Challenges in the industrial production of CZTS monograin solar cells10.1109/PVSC.2017.8366265 ↗
14. Sulfur-containing Cu2ZnSnSe4 monograin powders for solar cells10.1016/j.solmat.2010.06.046 ↗
15. Influence of calcination on the structural properties of earth abundant Cu2ZnSnS410.1016/j.jallcom.2020.156714 ↗
16. Cu2ZnSnSe4 monograin powders for solar cell application10.1109/WCPEC.2006.279492 ↗
17. Cu2Zn1–x Cdx Sn (Se1–y Sy) 4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
18. The effect of Ag alloying of Cu 2 (Zn, Cd) SnS 4 on the monograin powder properties and solar cell performance10.1039/C9TA07768E ↗
19. Influence of order-disorder in Cu2ZnSnS4 powders on the performance of monograin layer solar cells10.1016/j.tsf.2016.10.017 ↗
20. p–n junction improvements of Cu2ZnSnS4/CdS monograin layer solar cells10.1016/j.apsusc.2015.09.094 ↗
21. Towards a high efficient Cd-free double CZTS layers kesterite solar cell using an optimized interface band alignment10.1016/j.solener.2022.04.040 ↗
22. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
23. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
24. A comparative study on the performance of Kesterite based thin film solar cells using SCAPS simulation program10.1016/j.spmi.2015.02.020 ↗
25. Environmental assessment of vacuum and non-vacuum techniques for the fabrication of Cu2ZnSnS4 thin film photovoltaic cells10.7567/JJAP.57.08RC14 ↗
26. Life cycle assessment of different chalcogenide thin-film solar cells10.1016/j.apenergy.2022.118888 ↗
27. Life cycle environmental impacts from CZTS (copper zinc tin sulfide) and Zn3P2 (zinc phosphide) thin film PV (photovoltaic) cells10.1016/j.energy.2014.06.076 ↗
28. A comparative life cycle assessment of chalcogenide/Si tandem solar modules10.1016/j.energy.2017.12.130 ↗
29. Environmental profile of the manufacturing process of perovskite photovoltaics: harmonization of life cycle assessment studies10.3390/en12193746 ↗
30. The new international standards for life cycle assessment: ISO 14040 and ISO 1404410.1065/lca2006.02.002 ↗
31. 2006 · vol. 14044
32. 2006
33. 2022
34. Choice of life cycle assessment software can impact packaging system decisions10.1002/pts.2123 ↗
35. Life cycle assessment software: selection can impact results10.1111/jiec.12245 ↗
36. Latunussa · 2016
37. Life Cycle Assessment of an innovative recycling process for crystalline silicon photovoltaic panels10.1016/j.solmat.2016.03.020 ↗
38. Environmental impacts of PV technology throughout the life cycle: Importance of the end-of-life management for Si-panels and CdTe-panels10.1016/j.energy.2017.07.031 ↗
39. Photovoltaic degradation rate affected by different weather conditions: a case study based on PV systems in the UK and Australia10.3390/electronics9040650 ↗
40. Fthenakis · 2011 · 12
41. CPV membranes made by roll-to-roll printing: a feasible approach?10.1063/1.4962100 ↗
42. Stability, reliability, upscaling and possible technological applications of kesterite solar cells
43. Comparison of three different LCIA methods: EDIP97, CML2001 and Eco-indicator 9910.1007/BF02978471 ↗
44. Cumulative energy demand in LCA: the energy harvested approach10.1007/s11367-015-0897-4 ↗
45. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
46. Li · 2017
47. Prospects of life cycle assessment of renewable energy from solar photovoltaic technologies: a review10.1016/j.rser.2018.07.048 ↗
48. Commodity · 2021
49. Life cycle assessment of metals: a scientific synthesis10.1371/journal.pone.0101298 ↗
50. Life cycle assessment of copper production: a case study in China10.1007/s11367-017-1405-9 ↗
51. The assessment of major hazards: the lethal toxicity of bromine10.1016/0304-3894(86)85002-6 ↗
52. Life cycle assessment (LCA) studies on flame retardants: a systematic review10.1016/j.jclepro.2020.123259 ↗
53. Life cycle assessment of flame retardants in an electronics application10.1007/s11367-015-0999-z ↗
54. Comparative study on life cycle environmental impact assessment of copper and aluminium cables10.1088/1755-1315/94/1/012166 ↗
55. Recovery of silver and Gold from copper anode slimes10.1007/s11837-014-1114-9 ↗
56. Metal recovery from high-grade WEEE: a life cycle assessment10.1016/j.jhazmat.2011.10.001 ↗
57. Impact analysis of goldsilver refining processes through life-cycle assessment10.1016/j.jclepro.2019.04.166 ↗
58. Comparison of life cycle environmental impact between two processes for silver separation from copper anode slime10.3390/ijerph19137790 ↗
59. Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications10.1177/0731684415618459 ↗
60. MOFs-derived self-sacrificing template strategy to double-shelled metal oxides nanocages as hierarchical interfacial catalyst for suppressing smoke and toxic gases releases of epoxy resin10.1016/j.cej.2021.134328 ↗
61. 4 - life cycle assessment of biopolymers
62. Comparative Life Cycle Assessment of gypsum plasterboard and a new kind of bio-based epoxy composite containing different natural fibers10.1016/j.jclepro.2018.03.042 ↗
63. Bio-based versus traditional polymer composites. A life cycle assessment perspective10.1016/j.jclepro.2014.03.017 ↗
64. Environmental modelling of aluminium recycling: a Life Cycle Assessment tool for sustainable metal management10.1016/j.jclepro.2014.09.102 ↗
65. de Koning · 2004
66. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
67. Life-cycle analyses of very-large scale PV systems using six types of PV modules10.1016/j.cap.2009.11.028 ↗
68. Energy payback time and carbon footprint of commercial photovoltaic systems10.1016/j.solmat.2013.08.037 ↗
69. A review on glucose and hydrogen peroxide biosensor based on modified electrode included silver nanoparticles10.1016/S1452-3981(23)18279-4 ↗