journal article·2017-02

Optimized utilization of NIR spectrum with interfacial TiO2/SiO2/TiO2 trilayer in hybrid-integrated multijunction architecture

Ling Shen, Yifeng Shen, Feng Li

Publisher page

Abstract

Abstract To make full use of the NIR spectrum, the three-junction (3 J) solar cells with bandgaps of 1.9/1.4/1.0 eV have been transfer-printed on top of microscale Ge solar cells with two different interfacial materials. The interfacial material consisting of TiO 2 /SiO 2 /TiO 2 trilayer has been used for the first time and hold about 15% averaged reflection comparable to As 2 Se 3 in the NIR range of 1200–1800 nm, which means that the trilayer is of high crystalline quality with gradually varied refractive index and acting as the role of light-trapping to reduce interfacial reflection. Measured EQE curves over a standard AM1.5D spectrum yield a short-circuit current density of 7 mA/cm 2 for Ge cells with both As 2 Se 3 and trilayer, which means that the trilayer is qualified for replacing As 2 Se 3 with outstanding antireflective properties. NIR optical images have confirmed the existence of air gaps between interfaces of some cells, which exhibit similar response to those without air gaps in the measurements of reflectance and EQE curves, showing great accommodation in mass production of this multijunction architecture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Will we exceed 50% efficiency in photovoltaics?10.1063/1.3600702 ↗
2. Lattice-matched multijunction solar cells employing a 1eV GaInNAsSb bottom cell10.1117/1.JPE.2.021805 ↗
3. 40% efficient metamorphic GaInP/GaInAs/Ge multijunction solar cells10.1063/1.2734507 ↗
4. High-efficiency GaInP/GaAs/InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junction10.1063/1.2753729 ↗
5. R.R. King, et al, Band-gap-engineered architectures for high-efficiency multijunction concentrator solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 2009, pp. 55–61
6. 42% 500X bi-facial growth concentrator cells10.1063/1.3658283 ↗
7. Sharp develops concentrator solar cell with world's highest conversion efficiency of 44.4%, Sharp Corp. Press Release, Jun. 14, 2013. 〈http://sharpworld.com/corporate/news/130614.html〉
8. III-V/Si hybrid photonic devices by direct fusion bonding10.1038/srep00349 ↗
9. Fabrication of GaInP/GaAs//Si solar cells by surface activated direct wafer bonding10.1109/JPHOTOV.2013.2273097 ↗
10. World Record Solar Cell with 44.7% Efficiency. Fraunhofer ISE Press Release, No.2/13, Sep.23, 2013. 〈http://www.ise.fraunhofer.de/en/press-and-media/pressreleases/presseinformationen-2013/world-record-solar-cell-with-44.7-efficiency〉.
11. J.M. Gee, G.F. Virshup, A 31% efficient GaAs/silicon mechanically stacked multijunction concentrator solar cell, in: Proceedings of the 20th IEEE Photovoltaic Specialists Conference, 1, 1988, pp. 754–75810.1109/PVSC.1988.105803 ↗
12. L.M. Fraas, et al., Over 35% efficient GaAs/GaSb stacked concentrator cell assemblies for terrestrial applications, in: Proceedings of the 21th IEEE Photovoltaic Specialists Conference, 1, 1990, pp. 190–19510.1109/PVSC.1990.111616 ↗
13. T. Takamoto, et al., InGaP/GaAs and InGaAs mechanically-stacked triple-junction solar cells, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, 1997, pp. 1031–103410.1109/PVSC.1997.654265 ↗
14. Recent progress and spectral robustness study formechanically stacked multi-junction solar cells10.1063/1.3509212 ↗
15. Optimized short-circuit current mismatch in multi-junction solar cells10.1016/j.solmat.2013.05.046 ↗
16. Printing-based assembly of quadruple-junction, four-terminal microscale solar cells for the realization of high-efficiency modules10.1038/nmat3946 ↗
17. Effect of annealing conditions on the physio-chemical properties of spincoated As2Se3chalcogenide glass films10.1364/OME.2.001723 ↗
18. Optimized broad band and quasi-omnidirectional anti-reflection properties with moth-eye structures by low cost replica molding10.1016/j.apsusc.2014.10.169 ↗
19. Lattice-matched multijunction solar cells employing a 1eV GaInNAsSb bottom cell10.1117/1.JPE.2.021805 ↗
20. M. Meitl, et al., Materials and processes for releasing printable compound semiconductor devices, International publication number: WO 2012018997A2, 2012