Color and reflective properties of magnesium phosphate cement grouting material for cooling pavement
Source abstract
Abstract
In order to reduce the absorption of solar radiation by asphalt pavement in plateau permafrost regions and protect the underlying permafrost subgrade, the aim of this research was to develop a dark high near-infrared (NIR) reflective material using magnesium phosphate cement (MPC) and chrome black T, and to construct reflective grouting compound pavement (RGCP) by grouting the material into large void asphalt mixture. The optimal magnesium (M)/phosphate (P) ratio of MPC was determined to be 10 through solar spectral reflectance test, with a NIR reflectance of 71.74 %. A series of experiments, including chromaticity characteristics, reflectance test, SEM-EDS analysis, and strength test, were conducted to characterize the impact of chrome black T content on the reflection and mechanical properties of MPC. The results indicated that the chrome black T particles were uniformly distributed on the surface of MPC and filled in its pores, which not only effectively colored the MPC, but also improved its mechanical strength. Since the reflectivity of chrome black T was lower than that of MPC, its incorporation also reduced the NIR reflectivity of MPC to a certain extent. Overall, MPC with 1 % chrome black T content had a color similar to asphalt and a NIR reflectance of 43.91 %, making it a suitable dark NIR reflective material. An indoor irradiation experiment verified that RGCP can maintain a lower temperature under solar radiation. Compared with the control group, the surface temperature of the RGCP specimen was reduced by 4.5 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Performance analysis of incorporating phase change materials in asphalt concrete pavements10.1016/j.conbuildmat.2017.12.226 ↗
2. A review on thermoelectric energy harvesting from asphalt pavement: configuration, performance and future10.1016/j.conbuildmat.2019.116818 ↗
3. Cooling performance of two-phase closed thermosyphons installed at a highway embankment in permafrost regions10.1016/j.applthermaleng.2015.11.102 ↗
4. Optical and durability performance of near-infrared reflective coatings for cool pavement: laboratorial investigation10.1016/j.buildenv.2019.106334 ↗
5. Innovative thermochromic asphalt coating: characterization and thermal performance10.1080/14680629.2015.1068215 ↗
6. Effects of accelerated weathering on the optical characteristics of reflective coatings for cool pavement10.1016/j.solmat.2020.110698 ↗
7. Evaluation of thermal and anti-rutting behaviors of thermal resistance asphalt pavement with glass microsphere10.1016/j.conbuildmat.2020.120609 ↗
8. Characterization of thermal insulating micro-surfacing modified by inorganic insulating material10.1016/j.conbuildmat.2018.04.170 ↗
9. Characterization of a novel cement-based composite phase change material and potential cooling effect10.1016/j.solener.2020.07.083 ↗
10. Improving rutting and fatigue properties of asphalt mastic by adding cement-polyethylene glycol composite10.1061/(ASCE)MT.1943-5533.0003879 ↗
11. A review on hydronic asphalt pavement for energy harvesting and snow melting10.1016/j.rser.2015.04.029 ↗
12. Cooling performance and thermal radiation model of asphalt mixture with modified infrared powder10.3390/ma14020245 ↗
13. A comparative study of the thermal and radiative impacts of photovoltaic canopies on pavement surface temperatures10.1016/j.solener.2006.11.007 ↗
14. A new water-retaining paver block for reducing runoff and cooling pavement10.1016/j.jclepro.2018.07.250 ↗
15. A drainable water-retaining paver block for runoff reduction and evaporation cooling10.1016/j.jclepro.2019.04.142 ↗
16. Jones · 2010
17. Oriented heat release in asphalt pavement induced by high-thermal-conductivity rods10.1016/j.applthermaleng.2015.07.026 ↗
18. A novel strategy of inducing solar absorption and accelerating heat release for cooling asphalt pavement10.1016/j.solener.2017.10.086 ↗
19. Field test on ventilation characteristics of block stone embankments in qinghai-tibet railway10.1007/s11204-014-9282-8 ↗
20. In-situ experimental and numerical investigation on the cooling effect of a multi-lane embankment with combined crushed-rock interlayer and ventilated ducts in permafrost regions10.1016/j.coldregions.2014.05.003 ↗
21. Evaluating the performance of a novel ventilated embankment structure in warm permafrost regions by numerical simulation10.1016/j.coldregions.2023.103805 ↗
22. Optimizing of near infrared region reflectance of mix-waste tile aggregate as coating material for cool pavement with surface temperature measurement10.1016/j.enbuild.2017.10.001 ↗
23. Laboratorial investigation on optical and thermal properties of cool pavement nano-coatings for urban heat island mitigation10.1016/j.buildenv.2018.10.017 ↗
24. A novel solar reflective coating with functional gradient multilayer structure for cooling asphalt pavements10.1016/j.conbuildmat.2019.03.180 ↗
25. Modeling effects of urban heat island mitigation strategies on heat-related morbidity: a case study for Phoenix, Arizona, USA10.1007/s00484-009-0247-y ↗
26. Shi · 2015
27. Comparison between aesthetic and thermal performances of copper oxide and titanium dioxide nano-particulate coatings10.1016/j.jqsrt.2010.08.032 ↗
28. Durability evaluation of road cooling coating10.1016/j.conbuildmat.2018.09.071 ↗
29. State of the art on the development of cool coatings for buildings and cities10.1016/j.solener.2017.01.068 ↗
30. Matching the color difference between asphalt mixture and cement grouting paste used in semi-flexible pavement
31. Improvement in the water resistance of MAPC coatings as a function of NaCl concentration
32. Chromatic and near-infrared reflective properties of Fe3+ doped KZnPO410.1016/j.solener.2014.09.004 ↗
33. Preparation and properties of aluminum phosphate/organosilicon resin organic–inorganic hybrid materials and fiber reinforced composites10.1016/j.msea.2007.06.006 ↗
34. Radiative cooling performance and life-cycle assessment of a scalable MgO paint for building applications10.1016/j.jclepro.2022.135035 ↗
35. Optimizing gradation design for ultra-thin wearing course asphalt10.3390/ma13010189 ↗
36. 2019
37. 2005
38. 2012
39. Changes in color and thermal properties of fly ash cement mortar after heat treatment10.1016/j.conbuildmat.2018.01.029 ↗
40. 2020
41. Design and experimental evaluation of reflective grouting asphalt concrete for durable cooling asphalt pavement10.1016/j.enbuild.2023.113262 ↗
42. Design and experimental evaluation of composite magnesium phosphate cement-based coating with high cooling effect10.3390/su141710790 ↗
43. Experimental and computational investigation of magnesium phosphate cement mortar10.1016/j.conbuildmat.2016.02.200 ↗
44. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
45. Matching color difference between asphalt mixture and cement grouting paste used in semi-flexible pavement
46. Aging albedo model for asphalt pavement surfaces10.1016/j.jclepro.2016.01.019 ↗
47. Microstructure of graphene oxide–silica-reinforced OPC composites: image-based characterization and nano-identification through deep learning10.1016/j.cemconres.2022.106737 ↗