journal article·2023-07

Thermodynamic assessment of binary chloride salt material for heat transfer and storage applications in CSP system

Yecheng Yao, Jing Ding, Shule Liu, Xiaolan Wei, Weilong Wang, Jianfeng Lu

Publisher page

Abstract

Molten chloride salt is recognized as a promising heat transfer fluid and thermal energy storage material (TES) in concentrating solar power (CSP) in recent years, and its phase diagram as key data for material design still need further research. In this work, the phase equilibrium characteristics of solid-liquid equilibrium and vapor-liquid equilibrium for binary chloride salt system (Na/K–Ca/Mg) are investigated respectively. Based on Wilson model, the activity coefficient and non-ideal behavior of liquid salts are predicted effectively, and then the solid-liquid phase diagrams of binary salts are calculated, and the predicted eutectic temperature and component agree well with experimental data. Vapor-liquid phase diagrams of binary salts are also calculated, and azeotropic temperature can only be found in the MgCl 2 based mixed salts. As the system pressure rises, the azeotropic temperature increases, while azeotropic component slightly changes. According to the variation of vapor pressure for eutectic salts, the correlations for vapor pressure with temperature and composition are developed. Thermal stability of eutectic salts is experimentally studied by Thermo-gravimetric analyzer (TGA) and operating temperature ranges of these mixed salts are revealed. It can be found that the mass loss rate at different temperature is directly proportional to the vapor pressure. In general, present binary chloride salts show wide operating temperature range and high heat storage density, and eutectic NaCl–MgCl 2 with advantage of heat storage density and azeotropic point existence is recommended as TES in the CSP plant.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
2. Progress in research and development of molten chloride salt technology for next generation concentrated solar power plants10.1016/j.eng.2020.06.027 ↗
3. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
4. Thermodynamic evaluation and optimization of the (LiCl-NaCl-KCl-MgCl2-CaCl2-CeCl3) system10.1016/j.fluid.2018.11.031 ↗
5. Improving the working fluid based on a NaNO3-KNO3-NaCl-KCl molten salt mixture for concentrating solar power energy storage10.1016/j.solener.2021.11.058 ↗
6. Prediction of the eutectic mixture formation of monovalent cation ternary salt mixture based on theoretical modeling and differential scanning calorimeter method10.1016/j.tca.2017.04.015 ↗
7. Molecular dynamics simulations and thermodynamic modeling of NaCl-KCl-ZnCl2 ternary system10.1016/j.calphad.2014.04.004 ↗
8. Design and investigation of the novel ZnCl2 based ternary chloride salts with low-temperature for sensible energy storage10.1016/j.applthermaleng.2020.114917 ↗
9. Assessment of a novel ternary eutectic chloride salt for next generation high-temperature sensible heat storage10.1016/j.enconman.2018.04.100 ↗
10. Optimum design and key thermal property of NaCl-KCl-CaCl2 eutectic salt for ultra-high-temperature thermal energy storage10.1016/j.solmat.2021.111541 ↗
11. Design and thermal properties of a novel ternary chloride eutectics for high-temperature solar energy storage10.1016/j.apenergy.2015.07.022 ↗
12. Experimental test of properties of KCl-MgCl2 eutectic molten salt for heat transfer and thermal storage fluid in concentrated solar power systems10.1115/1.4040065 ↗
13. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
14. Engineering molten MgCl2-KCl-NaCl salt for high-temperature thermal energy storage: review on salt properties and corrosion control strategies10.1016/j.solmat.2021.111344 ↗
15. Thermal stability calculation and experimental investigation of common binary chloride molten salts applied in concentrating solar power plants10.3390/en15072516 ↗
16. Thermodynamic modeling of nuclear fuel materials
17. Smith · 2005
18. From Wilson to F-SAC: a comparative analysis of correlative and predictive activity coefficient models to determine VLE and IDAC of binary systems10.1016/j.fluid.2018.02.010 ↗
19. Correlation of interaction parameters in Wilson, NRTL and UNIQUAC models using theoretical methods10.1016/j.fluid.2016.02.041 ↗
20. Experimental investigation and modeling of vapor-liquid equilibria for Bi-Zn and Bi-Sn-Zn systems at 10 Pa10.1016/j.calphad.2021.102287 ↗
21. A general thermodynamic model for eutectics of phase change molten salts in concentrating solar power applications10.1016/j.est.2020.102065 ↗
22. Thermodynamic analysis of solid-liquid phase equilibria of nitrate salts10.1021/ie200581g ↗
23. Equation of state associated with activity coefficient models to predict low and high pressure vapor-liquid equilibria10.1016/S1385-8947(00)00138-8 ↗
24. Use of the Wilson equation to calculate solid-liquid phase equilibria in binary and ternary systems10.1016/0378-3812(77)85004-8 ↗
25. Thermodynamic studies of phase equilibria in molten salt systems10.1021/i160035a023 ↗
26. A new model combining Helmholtz energy equations of state with excess Gibbs energy models to describe reactive mixtures10.1016/j.ces.2021.117261 ↗
27. GE model independent application of the Gibbs-Helmholtz validation method to P-x data10.1016/j.fluid.2019.112299 ↗
28. Vapor-Liquid Equilibrium. XI. A new expression for the excess free energy of mixing10.1021/ja01056a002 ↗
29. Poling · 2000
30. An approach to calculate solid-liquid phase equilibrium for binary mixtures10.1016/j.fluid.2009.03.020 ↗
31. Walas · 1985 · 165
32. Modeling and measurement of vapor-liquid equilibrium of In-Pb and In-Pb-Sn alloy systems in vacuum distillation10.1016/j.vacuum.2022.111556 ↗
33. Janz · 1981
34. Janz · 1978
35. Yaws · 2015 · 315
36. Thermodynamic properties of some binary fused chloride mixtures obtained from e.m.f. measurements10.1016/0021-9614(74)90201-8 ↗
37. Thermodynamic properties of molten solutions of MgCl2-KCl, MgCl2-NaCl, and MgCl2-KCl-NaCl10.1021/je60024a009 ↗
38. Thermodynamic properties of binary, liquid magnesium chloride-alkali chloride mixtures10.3891/acta.chem.scand.23-2230 ↗
39. Phase diagrams and thermodynamic properties of the 70 binary alkali halide systems having common ions10.1063/1.555803 ↗
40. Determination of the solidus curve by a tracer technique10.3891/acta.chem.scand.12-1030 ↗
41. Die binären systeme von MgCl2 und CaCl2 mit den chloriden der metalle K, Na, Ag, Pb, Cu', Zn, Sn″ und Cd
42. Survey and evaluation of equations for thermophysical properties of binary/ternary eutectic salts from NaCl, KCl, MgCl2, CaCl2, ZnCl2 for heat transfer and thermal storage fluids in CSP10.1016/j.solener.2017.03.019 ↗
43. Williams · 2006
44. Exploitation and comprehensive utilization for Qinghai salt lakes
45. Thermal properties and thermal stability of the ternary eutectic salt NaCl-CaCl2-MgCl2 used in high-temperature thermal energy storage process10.1016/j.apenergy.2017.03.096 ↗