High-aspect-ratio silver grids of solar cells prepared by direct writing
Source abstract
Abstract
Reducing the width of conductive silver wires, increasing the aspect ratio, improving the utilization rate of silver paste, and enhancing the uniformity of silver wires are key issues that need to be addressed in the manufacture of solar cells. This article explores the feasibility of using glass nozzles to directly write ultra-high viscosity silver paste containing micrometer-sized particles. By preparing a glass nozzle with a diameter of 45 μ m , conductive silver wires with an average width of about 43± 2 μ m and an aspect ratio of up to 0.96 can be printed. After high-temperature sintering, the width of the silver wire is 32± 2 μ m , the aspect ratio is 0.95, and the resistance of the finger line is 0.13 Ω / cm . In addition, the conductive silver paste is a Herschel–Bulkley (HB) non-Newtonian fluid. Combining the constitutive equation of the HB fluid, a mathematical model of the silver paste flow inside the nozzle is established. Therefore, the influence of characteristic parameters of the silver paste/nozzle on the printing process can be intuitively understood.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Kipphan · 2001
2. Progress with screen printed metallization of silicon solar cells-towards 20 μm line width and 20 mg silver laydown for PERC front side contacts10.1016/j.solmat.2022.111804 ↗
3. Optimized stencil print for low Ag paste consumption and high conversion efficiencies10.1016/j.egypro.2015.03.294 ↗
4. Single print metal stencils for high-efficiency PERC solar cells10.1016/j.egypro.2016.10.079 ↗
5. High-throughput front and rear side metallization of silicon solar cells using rotary screen printing10.1016/j.egypro.2017.09.343 ↗
6. Evaluation of flexographic printing technology for multi-busbar solar cells10.1016/j.egypro.2015.03.296 ↗
7. A. Lorenz, A. Kraft, C. Gredy, A. Filipovic, S. Binder, K. Krüger, J. Bartsch, F. Clement, D. Biro, R. Preu, et al., Comprehensive Comparison of Different Fine Line Printing Technologies Adressing the Seed and Plate Approach with Ni-Cu-Plating, in: Proc. of the 30th EUPVSEC, 2015, pp. 732–736.
8. Flexographic printing–towards an advanced front side metallization approach with high throughput and low silver consumption10.1016/j.solmat.2016.07.025 ↗
9. Flexo-printed busbarless solar cells for multi-wire interconnection10.1016/j.egypro.2016.10.080 ↗
10. A. Lorenz, M. Linse, H. Frintrup, M. Jeitler, A. Mette, M. Lehner, R. Greutmann, H. Brocker, M. König, D. Erath, et al., Screen printed thick film metallization of silicon solar cells—recent developments and future perspectives, in: 35th European Photovoltaic Solar Energy Conference and Exhibition, 2018, pp. 819–824.
11. Passivated emitter and rear cell—Devices, technology, and modeling10.1063/5.0005090 ↗
12. Screen pattern simulation for an improved front-side Ag-electrode metallization of Si-solar cells10.1002/pip.3313 ↗
13. A novel two step metallization of Ni/Cu for low concentrator c-Si solar cells10.1016/j.solmat.2010.06.032 ↗
14. Fine line printing for solar cells with knotless screens
15. Studying knotless screen patterns for fine-line screen printing of Si-solar cells10.1109/JPHOTOV.2019.2959939 ↗
16. B. Grübel, G. Cimiotti, V. Arya, F. Feldmann, B. Steinhauser, S. Kluska, M. Glatthaar, Plated Ni/Cu/Ag for TOPCon solar cell metallization, in: 36th European Photovoltaic Solar Energy Conference, 2019, pp. 1–5.
17. Plating metallization for bifacial i-topcon silicon solar cells
18. Progress of plated metallization for industrial bifacial topcon silicon solar cells10.1002/pip.3528 ↗
19. Pattern transfer printing (PTPTM) for c-Si solar cell metallization10.1016/j.egypro.2015.03.299 ↗
20. A. Adrian, D. Rudolph, J. Lossen, M. Matusovsky, V. Chandrasekaran, Benefits of pattern transfer printing method for finger metallization on silicon solar cells, in: Proceedings of the 35th European Photovoltaic Solar Energy Conference and Exhibition, Brussels, Belgium, 2018, pp. 24–27.
21. Metallization contributions, requirements, and effects related to pattern transfer printing (ptp™) on crystalline silicon solar cells
22. Classifications and applications of inkjet printing technology: A review10.1109/ACCESS.2021.3119219 ↗
23. Printed electronics as prepared by inkjet printing10.3390/ma13030704 ↗
24. Inkjet printed disposable high-rate on-paper microsupercapacitors10.1002/adfm.202108773 ↗
25. Recent progress in inkjet-printed thin-film transistors
26. Inkjet-printed flexible sensors: From function materials, manufacture process, and applications perspective
27. Mechanism of electrohydrodynamic printing based on ac voltage without a nozzle electrode10.1063/1.3126957 ↗
28. Overview of recent progress in electrohydrodynamic jet printing in practical printed electronics: Focus on the variety of printable materials for each component10.1039/D1MA00463H ↗
29. Electrohydrodynamic jet printing: Introductory concepts and considerations10.1002/smsc.202100073 ↗
30. Finger metallization using pattern transfer printing technology for C-Si solar cell10.1109/JPHOTOV.2020.3007001 ↗
31. Novel approach to print submicron conductive lines: From the fundamental process to the laboratory printer
32. 55-4: XTPL approach to print conductive structures in microscale for next-generation displays
33. Direct write 3D-printed interconnects for heterogenous integration of ultra thin chips
34. High-resolution deposition of conductive and insulating materials at micrometer scale on complex substrates10.1038/s41598-022-13352-5 ↗
35. Dispensing of low-temperature silver pastes
36. Filament stretching during parallel dispensing–a way to reduce silver consumption in SHJ metallization10.1016/j.solmat.2022.111871 ↗
37. High speed non-contact printing for solar cell front side metallization
38. Improved front side metallization for silicon solar cells by direct printing
39. High speed dispensing with novel 6” print head10.1016/j.egypro.2016.10.081 ↗
40. Applications of parallel dispensing in PV metallization
41. The rheology of suspensions of solid particles