journal article·2021-08Open access

Charge balancing and optical contrast optimization in Fe-MEPE/Ni1-xO electrochromic devices containing a Li reference electrode

Lukas Niklaus, Marco Schott, Uwe Posset, Mohor Mihelčič, Ivan Jerman, Guinevere A. Giffin

Abstract

Abstract A three-electrode cell setup enables to evaluate the redox behavior of both electrodes, i.e., iron-based metallopolymers (Fe-MEPE) and a complementary switching non-stoichiometric nickel oxide (Ni1-xO, multilayer structure), in detail during full cell operation. In this work, electrochromic devices (ECDs) with a Li reference electrode and different charge density ratios between the electrode materials have been studied (spectro-)electrochemically. The charge density ratio between the electrodes affects the cell voltage, optical contrast, response time, and cycling stability. Here, a neutral-colored bright state was obtained for the unbalanced configuration (ECD-1, charge density ratio Fe-MEPE:Ni1-xO_2 = 2:1, underbalanced) and the balanced configuration (ECD-2, charge density ratio Fe-MEPE:Ni1-xO_3 = 1:1, balanced). The operating voltage range of the ECDs can be narrowed by using a balanced or overbalanced Ni1-xO electrode, e.g., 1.5 V ↔ -1 V for ECD-3 (charge density ratio Fe-MEPE:Ni1-xO_5 = 1:3, overbalanced). Moreover, the cycling stability is enhanced from just a few cycles (ECD-1) to over 1000 potentiostatic switching cycles (ECD-2 and ECD-3).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. 2015
2. Electrochromic materials and devices for energy efficiency and human comfort in buildings: a critical review10.1016/j.electacta.2017.11.169 ↗
3. Color purity in polymer electrochromic window devices on indium-tin oxide and single-walled carbon nanotube electrodes10.1021/am900435j ↗
4. Polythieno[3,4- b ]thiophene as an optically transparent ion-storage layer10.1021/cm900843b ↗
5. Optical and electrochemical properties of CeO2 thin film prepared by an alkoxide route10.1016/j.solmat.2007.03.035 ↗
6. Optically passive counter electrodes for electrochromic devices: transition metal–cerium oxide thin films10.1016/S0927-0248(97)00267-5 ↗
7. L. Niklaus, M. Schott, J. Subel, S. Ulrich, D. Reichert, U. Posset, G.A. Giffin, Mixed Metal Oxides as Optically-Passive Ion Storage Layers in Electrochromic Devices Based on Metallopolymers (Submitted), Solar Energy Materials and Solar Cells.
8. Using WO3 as a transparent, optically-passive counter electrode in an unbalanced electrochromic configuration10.1016/j.elecom.2016.09.001 ↗
9. Exploring unbalanced electrode configurations for electrochromic devices10.1039/C7TC04730D ↗
10. Avoiding voltage-induced degradation in PET-ITO-based flexible electrochromic devices10.1021/acsami.0c07860 ↗
11. Metallopolymers and non-stoichiometric nickel oxide: towards neutral tint large-area electrochromic devices10.1016/j.solmat.2019.110002 ↗
12. Electrochemical pretreatment of electrochromic WO3 films gives greatly improved cycling durability10.1016/j.tsf.2018.02.032 ↗
13. Electrochemical rejuvenation of anodically coloring electrochromic nickel oxide thin films10.1021/acsami.7b13815 ↗
14. Eliminating degradation and uncovering ion-trapping dynamics in electrochromic WO 3 thin films10.1038/nmat4368 ↗
15. Electrochromic metallo-supramolecular polymers showing visible and near-infrared light transmittance modulation10.1016/j.solmat.2019.110001 ↗
16. L. Niklaus, M. Schott, U. Posset, G.A. Giffin, Redox electrolytes for hybrid type II electrochromic devices with Fe‐MEPE or Ni1‐xO as electrode materials, ChemElectroChem. https://doi.org/10.1002/celc.202000583.10.1002/celc.202000583 ↗
17. Multinucleating 2,2′ 6′,2″-terpyridine ligands as building blocks for the assembly of co-ordination polymers and oligomers10.1039/DT9920003467 ↗
18. State-of-the-art electrochromic materials based on metallo-supramolecular polymers10.1016/j.solmat.2014.03.032 ↗
19. In operando XAFS experiments on flexible electrochromic devices based on Fe(II)-metallo-supramolecular polyelectrolytes and vanadium oxide10.1016/j.solmat.2015.10.015 ↗
20. Electrochromic Ni1−xO pigment coatings and plastic film-based Ni1−xO/TiO2 device with transmissive light modulation10.1016/j.solmat.2012.08.012 ↗
21. Preparation of electrochromic Ni1−xO and TiO2 coatings from pigment dispersions and their application in electrochromic foil based devices10.1016/j.porgcoat.2013.05.011 ↗
22. Stimuli-responsive metallo-supramolecular polymer films: design, synthesis and device fabrication10.1039/C4TC00689E ↗
23. Surface properties of nanostructured NiO undergoing electrochemical oxidation in 3-methoxy-propionitrile10.1016/j.apsusc.2017.01.202 ↗
24. Electrical properties of Li-doped NiO films10.1016/j.jeurceramsoc.2009.05.041 ↗
25. Electrochromism in Ni oxide thin films made by advanced gas deposition and sputtering: a comparative study demonstrating the significance of surface effects10.1149/1945-7111/aba5d9 ↗
26. Granqvist · 1995
27. In situ electrochromic efficiency of a nickel oxide thin film: origin of electrochemical process and electrochromic degradation10.1039/C7TC04696K ↗
28. Tunable properties of Mg-doped V2O5 thin films for energy applications: Li-Ion batteries and electrochromics10.1021/acs.jpcc.6b09018 ↗
29. Electrochromic behavior of fluorine-doped tin oxide film via guided motion of Li ions10.1016/j.jallcom.2018.08.268 ↗
30. High performance and long-term stability in ambiently fabricated segmented solid-state polymer electrochromic displays10.1021/acsami.5b02090 ↗