Thermal durability of solar selective absorbers consisting of β-FeSi2 with low emissive Ag layers on stainless steel
Source abstract
Abstract
Abstract Solar selective absorbers based on semiconducting β-FeSi2 and low-emissive Ag layers were prepared on stainless steel substrates, and the thermal durability below 650 °C was evaluated. Agglomeration and vaporization of the Ag layers were prevented by adding Ta and stacking with TaN layers, respectively. The solar absorbing layers, consisting of β-FeSi2, deteriorated at high temperatures, as a result of diffusion of Si from the silicide layers to substrates, which could be suppressed by using TaN/SiO2 layers at the interface between the stainless steel substrates and Ag layers with Ta and Si additives. The thermally stabilized solar selective absorbers achieved an averaged solar-thermal conversion efficiency of 87.0% between 300 and 650 °C. Arrhenius plots based on accelerated heating tests between 750 and 800 °C showed that the thermally stabilized absorbers were able to keep the decline in efficiency to within 1% for over 42 years at 650 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Silicon and Solar Cell Technologies · Chemical and Physical Properties of Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Advances in parabolic trough solar power technology10.1115/1.1467922 ↗
2. Kennedy · 2002
3. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications, Solar Energy Mater10.1016/j.solmat.2011.10.028 ↗
4. Seraphin · 1979
5. Carlo · 2004
6. Fabrication and optimization of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
7. Adhesion and structural stability enhancement for Ag layers deposited on steel in selective solar coatings technology10.1016/j.surfcoat.2014.02.045 ↗
8. Accelerated aging tests on ENEA-ASE solar coating for receiver tube suitable to operate up to 550 °C10.1063/1.4949055 ↗
9. Solar-selective absorbers based on semiconducting β-FeSi2 for efficient photothermal conversion at high temperature, Solar Energy Mater10.1016/j.solmat.2016.12.005 ↗
10. High-temperature solar-thermal conversion by semiconducting β-FeSi2 absorbers with thermally stabilized silver layers, Solar Energy Mater10.1016/j.solmat.2017.09.023 ↗
11. Borisenko · 2000
12. Optical properties of semiconducting iron disilicide thin films10.1063/1.335906 ↗
13. A clarification of the index of refraction of beta-ion disilliside10.1063/1.341735 ↗
14. Reference solar spectral irradiance: ASTM G-173. Available at: ⟨http://rredc.nrel. gov/solar/spectra/am1.5/astmg173/astmg173.html⟩, (accessed 26.03.16).
15. Specimen preparation for high-resolution transmission electron microscopy using focused ion beam and Ar ion milling10.1093/jmicro/dfh067 ↗
16. Comparison of the agglomeration behavior of Ag(Al) films and Ag(Au) films10.1016/j.mee.2007.05.050 ↗
17. Agglomeration suppression behavior and mechanisms of Ag–Cu and Ag–Nb thin films10.1016/j.vacuum.2009.06.015 ↗
18. Improvement of the thermal stability of silver metallization10.1063/1.1609646 ↗
19. Electrical resistivity of thin electroless Ag–W films for metallization10.1016/S0167-9317(03)00423-4 ↗
20. Electrical properties of Ag/Ta and Ag/TaN thin films10.1016/j.mee.2013.06.002 ↗
21. Diffusion barriers in thin films10.1016/0040-6090(78)90184-0 ↗
22. Barrier layers: principles and applications in microelectronics10.1116/1.572580 ↗
23. Comparison of the diffusion barrier properties of chemical-vapor-deposited TaN and sputtered TaN between Cu and Si10.1063/1.361518 ↗
24. Properties of direct current magnetron reactively sputtered TaN10.1116/1.583826 ↗
25. Buried (Fe1-xCox)Si layers with variable band gap formed by ion beam synthesis
26. Photovoltaic characteristics of β-FeSi2(Al)/n-Si(100) heterojunction solar cells and the effects of interfacial engineering10.1063/1.3536523 ↗
27. Microstructure and thermoelectric properties of Cr-doped β-FeSi2 sintered with micrograins treated in radio frequency plasmas of SiH4 and GeH4 gases10.1063/1.1507814 ↗