A simultaneous achievement of high performance and extended thermal stability of bulk-heterojunction polymer solar cells using a polythiophene–fullerene block copolymer
Source abstract
Abstract
Abstract We report substantial improvements in efficiency and thermal stability of the poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) (P3HT:PCBM) bulk heterojunction (BHJ) system by adding a diblock copolymer P3HT-b-P(St89BAz11)-C60 (P3HT=poly (3-hexylthiophene), St=styrene, BAz=benzyl azide) as a compatibilizer. Small amounts of the diblock copolymer alter the interfacial morphology between the P3HT and PCBM components, resulting in a noticeable difference in phase segregation of the BHJ films, as evident in atomic force microscopy images. The best performance is observed in the P3HT:PCBM cell with 10% P3HT-b-P(St89BAz11)-C60, which exhibits substantially improved power conversion efficiency and thermal stability compared to the P3HT:PCBM control device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
3. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%
4. of nanomorphology on the photovoltaic action of polymer-fullerene composites10.1088/0957-4484/15/9/035 ↗
5. New architecture for high‐efficiency polymer photovoltaic cells using solution based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
6. Efficiency enhancement in low-band gap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
7. Three-dimensional bulk heterojunction morphology for achieving high internal quantum efficiency in polymer solar cells10.1021/ja710079w ↗
8. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
9. Well-defined donor-acceptor rod-coil diblock copolymers based on P3HT containing C60: the morphology and role as a surfactant in bulk-heterojunction solar cells10.1039/b901732a ↗
10. Supramolecular materials via block copolymer self-assembly10.1002/1521-4095(200108)13:16<1217::AID-ADMA1217>3.0.CO;2-D ↗
11. Enabling nanotechnology with self assembled block copolymer patterns10.1016/j.polymer.2003.08.011 ↗
12. Nonlamellar phases in asymmetric rod-coil block copolymers at increased segregation strengths10.1021/ma070976x ↗
13. Donor–acceptor block copolymers for photovoltaic applications10.1039/c0jm00665c ↗
14. Block copolymer strategies for solar cell technology10.1002/polb.22302 ↗
15. Self-assembly and charge-transport properties of a polythiophene–fullerene triblock copolymer10.1002/adma.200902696 ↗
16. Controlled radical polymerization techniques10.1021/ja000160a ↗
17. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
18. Towards optimization of P3HT:bisPCBM composites for highly efficient polymer solar cells10.1039/c0jm00790k ↗
19. Correlation between structural and optical properties of composite polymer fullerene films for organic solar cells10.1002/adfm.200400521 ↗
20. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
21. Photoinduced carrier generation in P3HT/PCBM bulk heterojunction materials10.1021/jp075565x ↗
22. Device annealing effect in organic solar cells with blends of regioregular poly (3-hexylthiophene) and soluble fullerene10.1063/1.1861123 ↗
23. Fill factor in organic solar cells
24. Double extraction of uniformly generated electron-hole pairs from insulators with noninjecting contacts10.1063/1.1660633 ↗
25. Unification of the hole transport in polymeric field-effect transistors and light-emitting diodes10.1103/PhysRevLett.91.216601 ↗