Performance improvement of CSP particle receivers by depositing spinel absorber coatings
Source abstract
Abstract
The challenging development/modification of particles to meet the requirements of thermal stability, high absorptance and mechanical resistance with minimal economical cost is a key point to attain for the next particle receivers of concentrated solar power plants. The properties of the particles influence the performance of the system, since the concentrated solar radiation is absorbed and stored in these solid materials. In this work, resulting from the studies carried out within the HORIZON 2020 COMPASsCO2 project, the deposition of black-coloured transition-metal oxides with spinel-like structure coatings on different particles is proven. Five different particles (state-of-the-art and innovative) developed by Saint-Gobain have been coated, studied and compared. The coating deposition was adapted to the dip-coating methodology, ensuring high and good reproducibility. The composition of solid particles as well as the composition of the precursor solution, the curing methodology and the number of deposited spinel layers demonstrate that they have a great influence on the solar absorptance value and the abrasion resistance. Therefore, it is essential to find the perfect balance between all these different parameters in order to achieve the best performance of the particles. The addition of silica nanoparticles in the precursor solution provides rougher layers with enhanced absorptance, up to 0.980, on newly developed particles with excellent thermal stability and abrasion resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. 2015
2. Study on solar absorptance and thermal stability of solid particles materials used as TES at high temperature on different aging stages for CSP applications10.1016/j.solmat.2019.110088 ↗
3. A review of high-temperature particle receivers for concentrating solar power10.1016/j.applthermaleng.2016.04.103 ↗
4. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
5. S.G. R. Buck, Solar tower system temperature range optimization for reduced LCOE., in: AIP Conference Proceedings.
6. Design evaluation of a next-generation high-temperature particle receiver for concentrating solar thermal applications10.3390/en15051657 ↗
7. 2021
8. Thermal performance evaluation of lining materials used in thermal energy storage for a falling particle receiver based CSP system10.1016/j.solener.2018.12.047 ↗
9. Fluidized bed technology for concentrating solar power with thermal energy storage10.1115/1.4027262 ↗
10. Properties of granular materials as heat transfer and storage medium in CSP application10.1016/j.solmat.2015.06.037 ↗
11. Advances in central receivers for concentrating solar applications10.1016/j.solener.2017.03.048 ↗
12. Technology advancements for next generation falling particle receivers10.1016/j.egypro.2014.03.043 ↗
13. High temperature oxidation and erosion of candidate materials for particle receivers of concentrated solar power tower systems10.1016/j.solener.2019.06.057 ↗
14. Effective thermal conductivity and thermal cycling stability of solid particles for sCO2 CSP applications10.1016/j.solmat.2022.111764 ↗
15. The cost-saving potential of next-generation particle technology CSP with steam cycles10.1016/j.solener.2023.111954 ↗
16. Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants10.1002/est2.63 ↗
17. Optical characterisation of alumina–mullite materials for solar particle receiver applications10.1016/j.solmat.2021.111170 ↗
18. Improved performance of ceramic solar absorber particles coated with black oxide pigment deposited by resonant acoustic mixing and reaction sintering10.3390/coatings12060757 ↗
19. Physical properties of solid particle thermal energy storage media for concentrating solar power applications10.1016/j.egypro.2014.03.109 ↗
20. Hydraulic fracturing proppants10.1590/0366-69132018643702219 ↗
21. A comprehensive review on proppant technologies10.1016/j.petlm.2015.11.001 ↗
22. The development of direct absorption and storage media for falling particle solar central receivers10.1115/1.4030069 ↗
23. Optical properties of select particulates after high-temperature exposure
24. Nanoparticles based single and tandem stable solar selective absorber coatings with wide angular solar absorptance10.1016/j.solmat.2022.111758 ↗
25. Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications10.1016/j.solmat.2018.01.031 ↗
26. Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
27. Copper-oxide spinel absorber coatings for high-temperature concentrated solar power systems10.1016/j.solmat.2018.03.025 ↗
28. Ma · 2017
29. Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: a review10.1016/j.rser.2014.04.062 ↗
30. Non-selective coating for porous materials used for solar thermal applications
31. Christoph happich, martin schmücker, michael wolff, assesment and improvement of optical properties of particles for solid particle receiver
32. Extremely high temperature stable nanometric scale multilayer spectrally selective absorber coating: emissivity measurements at elevated temperatures and a comprehensive study on ageing mechanism10.1016/j.solmat.2020.110905 ↗
33. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
34. Selective properties of high-temperature stable spinel absorber coatings for concentrated solar thermal application10.1016/j.solener.2020.02.048 ↗
35. Development of high absorption, high durability coatings for solar receivers in CSP plants10.1063/1.5067075 ↗
36. Black coating of quartz sand towards low-cost solar-absorbing and thermal energy storage material for concentrating solar power10.1016/j.solener.2022.11.028 ↗
37. The improved solar weighted absorptance and thermal stability of desert sand coated with transition metal oxides for direct particle receiver10.1016/j.solmat.2022.112158 ↗
38. Modification of high temperature radiation absorption properties of solid particles with surface coating10.1016/j.solmat.2023.112567 ↗
39. Amirouche · 2021
40. Morales · 2003
41. Study of abrasion tests for antireflective and antisoiling/antireflective coatings on glass solar tubes10.1016/j.solener.2023.01.055 ↗
42. Sutter · 2022
43. 2020
44. 2020
45. Comparison of different forms of black cobalt selective solar absorber surfaces10.1016/0165-1633(87)90013-X ↗
46. Research on materials of solar selective absorption coating based on the first principle10.1515/phys-2021-0037 ↗
47. Electrodeposition of nanostructured copper oxide (CuO) coatings as spectrally solar selective absorber: structural, optical and electrical properties10.1016/j.infrared.2023.104820 ↗
48. Effect of electrodeposition time on absorptance, roughness and thermal stability of black chromium absorbing surfaces10.1590/1980-5373-mr-2021-0484 ↗
49. Solar selective coatings for concentrating solar power central receivers
50. Improvement of optical properties of AISI 304 as a solar absorber using a pulsed fiber laser10.1039/D3RA03873D ↗
51. Dornelles · 2007
52. A ray-tracing analysis of the absorption of light by smooth and rough metal surfaces10.1063/1.2738417 ↗
53. Thickness dependent morphological, structural and optical properties of SS/CuO nanocoatings as selective solar absorber10.1016/j.infrared.2020.103619 ↗