journal article·2017-02

Study of charge carriers’ transport in organic solar cells by illumination area shifting

Mihaela Girtan

Publisher page

Abstract

Abstract This paper presents an original investigation method to highlight the differences of mobilities and transport mechanisms of charge carriers in organic materials solar cells. Two types of polymer: fullerene solar cells were investigated: ITO/ PEDOT:PSS/P3HT:PCBM /Al and ITO/PEDOT:PSS/PCDTBT:PCBM/Al. The I–V characteristics were done under standard illumination (1000 W/m2) using a mask placed at different distances from the collecting cathode position. The influence of the distance between the irradiation area and the position of the collecting electrode on the performances of solar cells was studied. It has been observed that the short-circuit current and the open-circuit voltage considerably increase with the decrease of the distance between the cathode and the irradiation area. This study method gives also the opportunity to find the suitable collecting grid layout (distance between electrodes) depending on the nature of the organic materials. Moreover it can also explain the differences observed between the reported values in literature for the conversion efficiencies of organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Triple junction polymer solar cells10.1039/c3ee42257g ↗
2. The state of organic solar cells-A meta analysis10.1016/j.solmat.2013.05.034 ↗
3. On the electrical properties of transparent electrodes
4. Preparation and properties of SnO2: F thin films
5. Structural and optical properties of ZnO thin films deposited onto ITO/glass substrates10.1016/j.jnoncrysol.2008.06.070 ↗
6. On the properties of aluminium doped zinc oxide thin films deposited on plastic substrates from ceramic targets10.1016/j.apsusc.2013.03.046 ↗
7. On physical properties of undoped and Al and In doped zinc oxide films deposited on PET substrates by reactive pulsed laser deposition10.1051/epjap/2010112 ↗
8. Influence of Al doping agents nature on the physical properties of Al: zno films deposited by spin-coating technique
9. Role of ITO and PEDOT: pss in stability/degradation of polymer: fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
10. The influence of LiF layer and ZnO nanoparticles addings on the performances of flexible photovoltaic cells based on polymer blends
11. Influence of PEDOT: PSS layer on the performances of ‘bulk-heterojunction’ photovoltaic cells based on MEH-PPV: PCBM(1:4) polymeric blends
12. Effect of electrode geometry on photovoltaic performance of polymer solar cells10.1088/0022-3727/47/43/435104 ↗
13. Origin of photocurrent generation and collection losses in large area organic solar cells10.1063/1.3637041 ↗
14. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
15. Size effect on organic optoelectronics devices: example of photovoltaic cell efficiency10.1016/j.physleta.2007.09.068 ↗
16. Technological status of organic photovoltaics (OPV)10.1016/j.solmat.2013.08.044 ↗
17. Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%10.1039/C4TA04733H ↗
18. Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes10.1039/C4EE02582B ↗
19. Comparison of Fast Roll-to-Roll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells10.1002/adem.201300011 ↗
20. Comparison of UV-Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll-to-Roll Encapsulation Methods for Polymer Solar Cells10.1002/adem.201300172 ↗
21. On the stability of the electrical and photoelectrical properties of P3HT and P3HT: PCBM blends thin films10.1016/j.orgel.2012.10.023 ↗
22. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
23. Thermal stability of poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid films electrical properties10.1016/j.spmi.2008.10.010 ↗
24. Size effect on organic optoelectronics devices: example of photovoltaic cell efficiency10.1016/j.physleta.2007.09.068 ↗
25. Voltage tuning of plasmonic absorbers by indium tin oxide10.1063/1.4809516 ↗
26. Ultra high permittivity and significantly enhanced electric field induced strain in PEDOT: PSS-RGO@PU intelligent shape-changing electro-active polymers10.1039/C4RA10695D ↗
27. Conducting polymer material characterization using high frequency planar transmission line measurement10.4313/TEEM.2012.13.5.237 ↗
28. Effect of thermal annealing on charge transfer states and charge trapping in PCDTBT: PC70BM solar cells10.1002/aelm.201500167 ↗