journal article·2016-10

Photodegradation of Si-PCPDTBT:PCBM active layer for organic solar cells applications: A surface and bulk investigation

Aurélien Tournebize, Mamadou Seck, Andrej Vincze, Andreas Distler, Hans-Joachim Egelhaaf, Christoph J. Brabec, Agnès Rivaton, Heiko Peisert, Thomas Chassé

Publisher page

Abstract

Abstract The photooxidation of a polymer blend film used in efficient solar cells based on poly[(4,40-bis(2-ethylhexyl)dithieno[3,2-b:20,30- d]silole)-2,6-diylalt-(2,1,3-benzothiadiazole)-4,7-diyl], (Si-PCPDTBT) and [6,6]-phenyl-C71-butyric acid methyl (PC70BM) has been investigated. A set of experiments from complementary techniques was developed to monitor the modifications during ageing that occur not only in the bulk but also at the surface. The surface analyses were performed by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), and the bulk analyses by UV–visible spectroscopy and infrared (IR) spectroscopy. The results reveal that the silicon bridge atom is the first target of degradation. We have identified the existence of a photooxidation profile within the 300 nm thick film. Such a heterogeneous degradation was confirmed by time-of-flight secondary ion mass spectrometry (TOF-SIMS) depth profiling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. B.v. der Wiel, H.-J. Egelhaaf, H. Issa, M. Roos, N. Henze, Market Readiness of Organic Photovoltaics for Building Integration, MRS Online Proceedings Library, 1639, 2014, null–null.10.1557/opl.2014.88 ↗
2. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
3. Nanomorphology and charge generation in bulk heterojunctions based on low-bandgap dithiophene polymers with different bridging atoms10.1002/adfm.200900931 ↗
4. Combinatorial screening of polymer: fullerene blends for organic solar cells by inkjet printing10.1002/aenm.201000027 ↗
5. Performance enhancement of the P3HT/PCBM solar cells through NIR sensitization using a small-bandgap polymer10.1002/aenm.201200219 ↗
6. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell10.1002/adma.200900529 ↗
7. Nano-morphology characterization of organic bulk heterojunctions based on mono and bis-adduct fullerenes10.1016/j.orgel.2012.03.031 ↗
8. Field-independent charge photogeneration in PCPDTBT/PC70BM solar cells10.1021/jz1013517 ↗
9. Photo- and thermal degradation of MDMO-PPV: PCBM blends10.1016/j.solmat.2006.10.015 ↗
10. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
11. Photodegradation of P3HT – a systematic study of environmental factors10.1021/cm102373k ↗
12. Impact of UV-visible light on the morphological and photochemical behavior of a low-bandgap poly(2,7-Carbazole) derivative for use in high-performance solar cells10.1002/aenm.201200662 ↗
13. New insights into the mechanisms of photodegradation/stabilization of P3HT: PCBM active layers using poly(3-hexyl-d13-Thiophene)10.1021/cm402193y ↗
14. Photochemical stability of [small pi]-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
15. FTIR study of the impact of PC[60]BM on the photodegradation of the low band gap polymer PCPDTBT under O2 environment10.1021/acs.chemmater.5b00268 ↗
16. Unravelling the photodegradation mechanisms of a low bandgap polymer by combining experimental and modelling approaches
17. U. Aygul, H.J. Egelhaaf, P. Nagel, M. Merz, S. Schuppler, K. Eichele, H. Peisert, T. Chasse, Photodegradation of C-PCPDTBT and Si-PCPDTBT: influence of the bridging atom on the stability of a low-band-gap polymer for solar cell application, ChemPhysChem, 2014.10.1002/cphc.201402494 ↗
18. Characterization of the degradation process of Si-PCPDTBT:PC70BM(1:2) blend layers deposited on ITO/glass substrate10.1016/j.solmat.2014.09.014 ↗
19. Wavelength-dependent pathways of poly-3-hexylthiophene photo-oxidation10.1021/cm3008864 ↗
20. Multilayer formation in spin-coated thin films of low-bandgap polyfluorene: PCBM blends
21. Photoelectron spectroscopy of the contact between the cathode and the active layers in plastic solar cells: the role of LiF10.1143/JJAP.44.3695 ↗
22. Electronic properties of interfaces between PCPDTBT and prototypical electrodes studied by photoemission spectroscopy10.1002/cphc.201000999 ↗
23. Further insights into the photodegradation of poly(3-hexylthiophene) by means of X-ray photoelectron spectroscopy10.1016/j.tsf.2010.06.042 ↗
24. Polythiophene — O3 surface reactions studied by XPS10.1016/S0169-4332(01)00316-6 ↗
25. Effect of PCBM on the photodegradation kinetics of polymers for organic photovoltaics10.1021/cm302623p ↗
26. The role of electron affinity in determining whether fullerenes catalyze or inhibit photooxidation of polymers for solar cells10.1002/aenm.201200169 ↗
27. Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
28. Molecular packing and arrangement govern the photo-oxidative stability of organic photovoltaic materials10.1021/acs.chemmater.5b02341 ↗