Tailoring the surface morphology of zinc oxide films for high-performance micromorph solar cells
Source abstract
Abstract
Self-textured zinc oxide polycrystalline films prepared by metalorganic low-pressure chemical vapor deposition combine excellent transparency, conductivity and light-scattering ability when used as electrodes for high-efficiency thin-film silicon solar cells. However, the growth of silicon layers with low defect density, which are necessary for high-performance solar cells, often requires the rough surface morphology of as-deposited zinc oxide films to be smoothened. This is usually achieved by a post-deposition argon plasma-etching treatment. We investigate here an alternative method to modify the surface morphology by changing the zinc oxide growth conditions over only the last hundreds of nanometers of the total film thickness. We discuss two types of zinc oxide cap layers, one grown with the addition of ethanol and the other with an enhanced diethylzinc (DEZ) precursor flow. We show that the presence of either type of cap layer does not alter the layer's electrical properties, but does slightly diminish the layer's light-scattering ability. The cap layer grown with ethanol leads to a more pronounced leveling of the film texture, while the high-DEZ-grown layer better preserves the sharp features of the underlying ZnO. Finally, zinc oxide films with cap layer are used as front electrodes for tandem amorphous/microcrystalline silicon solar cells, and are compared to rough films treated with an argon plasma. With rising thickness of the capping layers, the efficiency of tandem cells increases reaching values over 12%, and approaches that of cells on Ar plasma treated ZnO films. (C) 2014 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
2. Optimization of the electrical properties of magnetron sputtered aluminum-doped zinc oxide films for opto-electronic applications10.1016/S0040-6090(03)00966-0 ↗
3. TCO and light trapping in silicon thin film solar cells10.1016/j.solener.2004.03.015 ↗
4. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
5. Unlinking absorption and haze in thin film silicon solar cells front electrodes10.1002/pssr.201004303 ↗
6. Comparison and optimization of randomly textured surfaces in thin-film solar cells10.1364/OE.18.00A335 ↗
7. Transparent electrode requirements for thin-film solar cell modules10.1039/C0EE00373E ↗
8. High performance tandem silicon solar cells on F:SnO210.1016/j.surfcoat.2013.05.029 ↗
9. Improved conversion efficiency of a-Si: H/μc-Si: H thin-film solar cells by using annealed Al-doped zinc oxide as front electrode material10.1002/pip.2389 ↗
10. Influence of the substrate geometrical parameters on microcrystalline silicon growth for thin-film solar cells10.1016/j.solmat.2009.05.025 ↗
11. A new view of microcrystalline silicon: the role of plasma processing in achieving a dense and stable absorber material for photovoltaic applications10.1002/adfm.201200299 ↗
12. Consolidation of thin-film photovoltaic technology: the coming decade of opportunity10.1002/pip.702 ↗
13. Material considerations for terawatt level deployment of photovoltaics10.1016/j.renene.2007.05.024 ↗
14. Achievements and challenges in thin film silicon module production10.1016/j.solmat.2013.06.043 ↗
15. Low pressure chemical vapour deposition of ZnO layers for thin-film solar cells: temperature-induced morphological changes10.1016/j.solmat.2004.08.002 ↗
16. Rough ZnO layers by LPCVD process and their effect in improving performances of amorphous and microcrystalline silicon solar cells10.1016/j.solmat.2006.06.003 ↗
17. Potential of thin-film silicon solar cells by using high haze TCO superstrates10.1016/j.tsf.2009.09.164 ↗
18. ZnO films with very high haze value for use as front transparent conductive oxide films in thin-film silicon solar cells10.1143/APEX.3.051102 ↗
19. J. Bailat, L. Fesquet, J.-B. Orhan, Y. Djeridane, B. Wolf, P. Madliger, J. Steinhauser, S. Benagli, D. Borrello, L. Castens, G. Monteduro, M. Marmelo, B. Dehbozorgi, E. Vallat-Sauvain, X. Multone, D. Romang, J.-F. Boucher, J. Meier, U. Kroll, M. Despeisse, G. Bugnon, C. Ballif, S. Marjanovic, G. Kohnke, N. Borrelli, K. Koch, J. Liu, R. Modavis, D. Thelen, S. Vallon, A. Zakharian, and D. Weidman, Recent developments of high-efficiency micromorph tandem solar cells in KAI-M PECVD reactors, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition/5th World Conference on Photovoltaic Energy Conversion, Valencia, Spain 2010.
20. Nanometer- and micrometer-scale texturing for high-efficiency micromorph thin-film silicon solar cells10.1109/JPHOTOV.2011.2179414 ↗
21. Multiscale transparent electrode architecture for efficient light management and carrier collection in solar cells10.1021/nl203909u ↗
22. Interaction of hydrogenated amorphous silicon films with transparent conductive films10.1063/1.332436 ↗
23. K. Sato, Y. Matsui, K. Adachi, Y. Gotoh, Y. Hayashi, and H. Nishimura, Hydrogen plasma treatment of ZnO-coated TCO films, in: Proceedings of the Photovoltaic Specialists Conference, Conference Record of the 23th IEEE, 1993, pp. 855–859 ).10.1109/PVSC.1993.347109 ↗
24. Light trapping in solar cells: can periodic beat random?10.1021/nn300287j ↗
25. Effects of surface morphology of transparent electrode on the open-circuit voltage in a-Si:H solar cells10.1143/JJAP.29.630 ↗
26. Structural defects caused by a rough substrate and their influence on the performance of hydrogenated nano-crystalline silicon n-i-p solar cells10.1016/j.solmat.2008.11.013 ↗
27. Effects of substrate surface morphology on microcrystalline silicon solar cells,10.1143/JJAP.40.L303 ↗
28. Relation between substrate surface morphology and microcrystalline silicon solar cell performance10.1016/j.jnoncrysol.2007.09.084 ↗
29. New progress in the fabrication of n-i-p micromorph solar cells for opaque substrates10.1016/j.solmat.2013.02.032 ↗
30. J. Bailat, D. Dominé, R. Schlüchter, J. Steinhauser, S. Faÿ, F. Freitas, C. Bücher, L. Feitknecht, X. Niquille, R. Tscharner, A. Shah, and C. Ballif, High-efficiency p-i-n microcrystalline and micromorph thin film silicon solar cells deposited on LPCVD ZnO coated glass substrates, in: Proceedings of the 4th WCPEC Conference, Hawaï, (2006).
31. Surface morphology and light scattering properties of plasma etched ZnO: B films grown by LP-MOCVD for silicon thin film solar cells10.1016/j.tsf.2009.07.200 ↗
32. W.W. Wenas and M. Konagai, Control of the surface morphology of ZnO thin films for solar cells by novel two-step MOCVD process, in: Proceedings of the Photovoltaic Specialists Conference, Conference Record of the 29th IEEE, 2002, pp. 1130–1133.10.1109/PVSC.2002.1190805 ↗
33. Ethanol-enriched low-pressure chemical vapor deposition ZnO bilayers: Properties and growth: a potential electrode for thin film solar cells10.1063/1.4775483 ↗
34. Control of CVD-deposited ZnO films properties through water/DEZ ratio: decoupling of electrode morphology and electrical characteristics10.1016/j.solmat.2012.05.016 ↗
35. Optimization of thin film silicon solar cells on highly textured substrates10.1002/pssa.201026745 ↗
36. In situ silicon oxide based intermediate reflector for thin-film silicon micromorph solar cells10.1063/1.2794423 ↗
37. Optical management in high-efficiency thin-film silicon micromorph solar cells with a silicon oxide based intermediate reflector10.1002/pssr.200802118 ↗
38. Effects of the surface morphology of transparent electrode on film deposition and photovoltaic performance of a-Si:H solar cells10.1016/0022-3093(89)90403-1 ↗
39. Optimization of ZnO front electrodes for high-efficiency micromorph thin-film Si solar cells10.1109/JPHOTOV.2011.2180514 ↗
40. Optimized short-circuit current mismatch in multi-junction solar cells10.1016/j.solmat.2013.05.046 ↗
41. The impact of intermediate reflectors on light absorption in tandem solar cells with randomly textured surfaces10.1063/1.3142421 ↗