journal article·2023-09

Influence of S-content ratios on the defect properties of Sb2(S , Se1–)3 thin-film solar cells

Rui Wang, Deyang Qin, Shiqi Zheng, Guoen Weng, Xiaobo Hu, Jiahua Tao, Junhao Chu, Hidefumi Akiyama, Shaoqiang Chen

Publisher page

Abstract

Sb 2(S, Se) 3 has widely emerged as an absorber material for solar cells because of its favourable optical properties and abundant raw materials. Although the Sb 2(S, Se) 3 film comprises simple binary elements and has a lesser complex phase than that of quaternary copper indium gallium selenide, the distribution of atoms within its structure significantly affects its performance. More specifically, this effect is attributed to three non-equivalent positions of selenium or sulphur atoms and two non-equivalent positions of antimony atoms inside its unique quasi-one-dimensional asymmetric structure. Consequently, the composition ratios inside Sb 2(S x, Se 1–x) 3 significantly impact the film`s properties, especially the defect properties. The underlying origins of this effect remain elusive. Along these lines, in this work, defect measurements of the Sb 2(S x, Se 1–x) 3 solar cells with different S-content ratios were conducted using deep-level transient spectroscopy and then discussed in detail. The analysis confirmed that deep-level defects were always present, and their lower density favoured the device`s performance. Moreover, the solar cells consisting of Sb 2(S x, Se 1–x) 3 thin films with 0.3 S-content ratios exhibit better conversion efficiency with lower deep-level defects density and capture cross-section.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Silicon solar cells: toward the efficiency limits
2. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
3. Detailed balance limit of efficiency of broadband-pumped lasers10.1038/s41598-017-11857-y ↗
4. Two stage modelling of solar photovoltaic cells based on Sb2S3 absorber with three distinct buffer combinations10.1016/j.solener.2020.03.058 ↗
5. Solar cell efficiency tables (version 19)10.1002/pip.428 ↗
6. Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se3
7. An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells
8. Crystal growth promotion and defect passivation by hydrothermal and selenized deposition for substrate-structured antimony selenosulfide solar cells10.1021/acsami.2c06805 ↗
9. Solution-Processed compact Sb2S3 thin films by a facile one-step deposition method for efficient solar cells10.1002/solr.202100666 ↗
10. Effective additive for enhancing the performance of Sb2S3 planar thin film solar cells10.1016/j.jmat.2021.02.001 ↗
11. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
12. Improving the efficiency of Sb2Se3 thin-film solar cells by post annealing treatment in vacuum condition10.1016/j.solmat.2018.08.006 ↗
13. 5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
14. Tao · 2019 · vol. 197 · 1
15. Solution-processed SnO 2 interfacial layer for highly efficient Sb 2 Se 3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
16. Sb2(Se1-xSx)3 thin-film solar cells fabricated by single-source vapor transport deposition10.1002/solr.201800280 ↗
17. Over 7% efficiency of Sb2(S,Se)3 solar cells via V-shaped bandgap engineering10.1002/solr.202000220 ↗
18. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
19. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb 2 Se 310.1021/acsami.9b01220 ↗
20. Intrinsic defect limit to the electrical conductivity and a two-step p-type doping strategy for overcoming the efficiency bottleneck of Sb2S3-based solar cells10.1002/solr.201900503 ↗
21. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics10.1038/s41467-021-23592-0 ↗
22. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
23. Effect of Ga content on defect states in CuIn1-xGa xSe2 photovoltaic devices10.1063/1.1485301 ↗
24. Influences of donor defect passivation on the performance of Cu(In,Ga)Se2 thin-film solar cell10.1007/s10854-017-8282-7 ↗
25. The influence of the composition ratio on CZTS-based thin film solar cells hironori katagiri, kazuo jimbo, masami tahara, hideaki araki and koichiro oishi nagaoka national college of technology, 888 nishikatakai, nagaoka, niigata 940-8532, Japan
26. Deep defects in Cu2ZnSn (S,Se)4 solar cells with varying Se content10.1103/PhysRevApplied.5.024004 ↗
27. Thorough subcells diagnosis in a multi-junction solar cell via absolute electroluminescence-efficiency measurements
28. Photographic diagnosis of crystalline silicon solar cells utilizing electroluminescence10.1007/s00339-008-4986-0 ↗
29. Diagnosis of GaAs solar-cell resistance via absolute electroluminescence imaging and distributed circuit modeling10.1016/j.energy.2019.02.170 ↗
30. Yield predictions for photovoltaic power plants:empirical validation,recent advances and remaining uncertainties10.1002/pip.1160 ↗
31. Shallow defects in Cu2ZnSnS410.1016/j.physb.2009.08.206 ↗
32. Investigation of electrically-active defects in Sb2Se3 thin-film solar cells with up to 5.91% efficiency via admittance spectroscopy10.1016/j.solmat.2018.07.004 ↗
33. Conductance and capacitance studies in GaP Schottky barriers10.1063/1.322194 ↗
34. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
35. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
36. Admittance spectroscopy of efficient CuInS2 thin film solar cells10.1063/1.1312838 ↗
37. Simulated admittance spectroscopy measurements of high concentration deep level defects in CdTe thin-film solar cells10.1063/1.2220491 ↗
38. Characterization of Mg and Fe doped Sb2Se3 thin films for photovoltaic application10.1063/1.4971388 ↗
39. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
40. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
41. Deep level trapped defect analysis in CH3NH3PbI3 perovskite solar cells by deep level transient spectroscopy10.1039/C7EE00303J ↗
42. Transactions · 2018 · vol. 86 · 137
43. Deep level transient spectroscopy of CdS/CdTe thin film solar cells10.1063/1.366285 ↗
44. A new lock-in amplifier-based deep-level transient spectroscopy test and measurement system for solar cells10.1016/j.solener.2022.08.062 ↗
45. Investigation of defect properties in Cu(In,Ga)Se2 solar cells by deep-level transient spectroscopy10.1016/j.sse.2004.03.005 ↗
46. Sb2Se3 thin-film solar cells exceeding 10% power conversion efficiency enabled by injection vapor deposition technology10.1002/adma.202202969 ↗
47. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
48. Water additive enhanced solution processing of alloy Sb2(S1−xSex)3-based solar cells10.1002/solr.201900582 ↗
49. Effects of working pressure on the material and defect properties of Sb 2 S 3 thin-film solar cells achieved by the VTD method10.1364/AO.461238 ↗
50. Preparation and characterization of Sb 2 Se 3 thin films by electrodeposition and annealing treatment10.1016/j.apsusc.2012.08.046 ↗
51. Crystal growth promotion and defect passivation by hydrothermal and selenized deposition for substrate-structured antimony selenosulfide solar cells10.1021/acsami.2c06805 ↗
52. Chemical etching induced surface modification and gentle gradient bandgap for highly efficient Sb2(S,Se)3 solar cell10.1016/j.apsusc.2021.152193 ↗
53. Solution processed polymer-inorganic semiconductor solar cells employing Sb2S3 as a light harvesting and electron transporting material10.1002/aenm.201300017 ↗
54. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb 2 Se 310.1021/acsami.9b01220 ↗
55. First principles prediction of the elastic, electronic, and optical properties of Sb 2S 3 and Sb 2Se 3 compounds10.1016/j.solidstatesciences.2012.06.003 ↗
56. Protocols for the Miller indexing of Sb2Se3 and a non-x-ray method of orienting its single crystals10.1016/j.mssp.2021.105691 ↗
57. Quasi-vertically-orientated antimony sulfide inorganic thin-film solar cells achieved by vapor transport deposition10.1021/acsami.0c02697 ↗
58. Structure and electronic properties of grain boundaries in earth-abundant10.1021/nn203230g ↗
59. Vapor transport deposition of highly efficient Sb2(S,Se)3 solar cells via controllable orientation growth
60. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
61. Controllable orientations for Sb2S3 solar cells by vertical VTD method10.1002/pip.3278 ↗
62. Detailed balance limit of efficiency of p-n junction solar cells
63. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
64. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
65. VaporTransport deposition of Sb2(S,Se)3Solar cells with continuously tunable band gaps10.1021/acsaem.2c00790 ↗