Filament stretching during parallel dispensing – A way to reduce silver consumption in SHJ metallization
Source abstract
Abstract
In the field of silicon heterojunction (SHJ) solar cells, great successes on improving production processes have been achieved in the last years, however further improvements in the case of metallization are required to obtain higher market share. Therefore, lower Ag laydowns and higher process throughput are demanded. This study presents the impact of filament stretching on Ag-electrode shapes and laydown during temperature-controlled micro-extrusion, known as parallel dispensing. Dispensed metal grids ensure higher cell performances than screen-printed grids. It has been discovered that the maximum use of filament stretching benefits the solar cell efficiency due to narrower Ag-electrodes and less silver consumption. We have shown a low Ag laydown per 157.35 mm line of mAg = 0.27 mg electrode-1 in average. An efficiency gain of ΔηA = + 0.26%abs. has been demonstrated by the maximum usage of filament stretching. Further, a novel parameter that values the effectiveness of silver usage and enables the comparison between different printing processes has been introduced. We have demonstrated that silver is used more effectively by up to +74%rel. when the low-temperature curing paste is dispensed compared to screen printing because dispensed electrodes show an almost perfectly homogeneous shape.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. 2012
2. Screen printed thick film metallization of silicon solar cells - recent developments and future perspectives
3. Screen pattern simulation for an improved front‐side Ag‐electrode metallization of Si‐solar cells10.1002/pip.3313 ↗
4. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
5. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
6. Raw material needs for the large-scale deployment of photovoltaics – effects of innovation-driven roadmaps on material constraints until 205010.1016/j.rser.2020.110589 ↗
7. 2021
8. High aspect ratio front contacts by single step dispensing of metal pastes
9. Applications of parallel dispensing in PV metallization10.1063/1.5125870 ↗
10. Comparison of innovative metallization approaches for silicon heterojunction solar cells10.1016/j.egypro.2017.09.245 ↗
11. Dispensing of low-temperature silver pastes10.1063/5.0056103 ↗
12. Investigations of thick-film-paste rheology for dispensing applications10.1016/j.egypro.2011.06.164 ↗
13. Correlations between finger geometry and dispensing paste rheology
14. Mack · 2013
15. Optimizing fine line dispensed contact grids10.1016/j.egypro.2014.08.046 ↗
16. Dispensing technology on the route to an industrial metallization process10.1016/j.egypro.2015.03.297 ↗
17. High speed dispensing - a high-throughput metallization technology for >21% PERC type solar cells
18. CIGS mini‐modules with dispensed metallization on transparent conductive oxide layer10.1002/solr.202000475 ↗
19. Fast screen printing and curing process for silicon heterojunction solar cells10.1063/5.0056429 ↗
20. Heterojunction, module integration, screen-printing, metallization
21. Shravan · 2019
22. Fine front side metallisation by stretching the dispensed silver paste filament with graphite nanofibres10.1016/j.solmat.2017.05.010 ↗
23. Filament stretching of silver pastes during micro-extrusion for silicon solar cell metallization10.1038/s41598-022-16249-5 ↗
24. Schube · 2020
25. Gautrein · 2015
26. Increasing the effective area of small-sized CIGS modules by printed Ag front contacts10.1002/pssr.202200040 ↗
27. Pospischil · 2016
28. Mezger · 2020
29. Challenges in rheological characterization of highly concentrated suspensions - a case study for screen-printing silver pastes10.3791/55377 ↗
30. The link between Ag‐paste rheology and screen‐printed solar cell metallization10.1002/admt.202000654 ↗
31. Explicit formulas for slip and fluidity10.1122/1.2116364 ↗
32. The separation of elastic and viscous effects in polymer flow10.1122/1.548905 ↗
33. Zur Analyse des Formänderungswiderstandes10.1007/978-3-642-92045-5_11 ↗
34. Process development for a high-throughput fine line metallization approach based on dispensing technology10.1016/j.egypro.2014.02.001 ↗
35. Lorenz · 2021
36. Progress with screen printed metallization of silicon solar cells - towards 20 μm line width and 20 mg silver laydown for PERC front side contacts
37. Chapter 6: screen-printed contacts
38. The theoretical fundamentals of the screen printing process
39. Chapter 7: alternative printing technologies
40. Edge fracture in complex fluids10.1103/PhysRevLett.119.028006 ↗
41. Analysis of the edge fracture process in oscillation for polystyrene melts10.1007/s00397-008-0286-z ↗
42. Hoornstra, J, Weeber, A. W, de Moor, H.C. C, Sinke, W. C, The Importance of Paste Rheology in Improving Fine Line, Thick Film Screen Printing of Front Side Metallization.
43. Influence of silver paste rheology and screen parameters on the front side metallization of silicon solar cell10.1016/j.mssp.2014.08.023 ↗
44. Rheology and screen-printing performance of model silver pastes for metallization of Si-solar cells10.3390/coatings8110406 ↗
45. Reinhardt · 2018
46. Rheological equations from molecular network theories10.1122/1.549276 ↗
47. Evolutionary algorithm optimizes screen design for solar cell metallization10.1016/j.jocs.2021.101325 ↗
48. Paste rheology correlating with dispensed finger geometry10.1109/JPHOTOV.2013.2278657 ↗