journal article·2022-06

Abrasion testing of anti-reflective coatings under various conditions

Katja Lange, Charlotte Pfau, Erik Grunwald, Matthias Schak, Eric Matthes, Stefan Grob, Marko Turek, Christian Hagendorf, Klemens Ilse

Publisher page

Abstract

PV modules can quickly accumulate a light hindering layer of dust on the front glass, especially in arid regions. This soiling needs to be removed regularly, often using dry brushes as water is usually not easily available to wash the panels. Repeated cleaning negatively affects the anti-reflective coating (ARC) on the glass, leading to permanent transmittance loss and therefore a reduced energy yield. Within this work, two different ARCs and a reference glass are investigated regarding their resistance against harsh abrasion with a dry linear brushing abrasion cycle tester for laboratory and mobile use. The reduction of the spectral transmission is studied as a function of brushing cycles (0, 100, 1000) and integral relative transmittance loss has been calculated. Furthermore, a sensitivity analysis is performed for additional test parameters being type of dust, brush speed and weight. In particular, the type of dust shows a significant influence on the abrasion behavior. Less influential are the brush weight and the speed in the range used here. The dusts used in this setup were Feldspar, Calcite, Corundum and Arizona test dust in different particle size distributions. Using the hard Corundum dust, 1000 brush cycles lead to a relative loss in transmittance of about 3%. The application potential of the presented linear abrasion test for quality assessment and benchmarking of commercial glass coatings will be discussed. In particular, the implementation of region-specific test dusts in laboratory test procedures is of high interest for further standardization activities.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
2. Resilience of industrial PV module glass coatings to cleaning processes10.1063/5.0024452 ↗
3. Combined soiling and abrasion testing of antisoiling coatings10.1109/JPHOTOV.2019.2945192 ↗
4. Techno-economic assessment of soiling losses and mitigation strategies for solar power generation10.1016/j.joule.2019.08.019 ↗
5. Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces10.1016/j.solmat.2020.110757 ↗
6. Comprehensive analysis of soiling and cementation processes on PV modules in Qatar10.1016/j.solmat.2018.06.051 ↗
7. The abrasion of photovoltaic glass: a comparison of the effects of natural and artificial aging10.1109/JPHOTOV.2019.2947029 ↗