journal article·2021-06

Modification of crystallization in Cu2ZnSn(S,Se)4 films using Al2O3 capping layers

Xiaowei Zhou, Chao Gao, Hao Luo, Zhiwei Liu, Haixu Liu, Haifeng Gao, Qing Zhou, Wenbo Li, Xiaoyun Teng, Wei Yu

Publisher page

Abstract

Abstract In this paper, we reported a modified preparation process for Cu2ZnSn(S,Se)4 (CZTSSe) films. For this process, Al2O3 capping layers were deposited on precursor films before selenization. It was found the capping layer can prevent the formation of separate CuxSe phase on top of the film and facilitate a homogeneous growth of the crystalline grains during selenization. Detailed characterizations revealed the reason: the Al2O3 capping layers can inhibit the incorporation of Se into the film in low-temperature region (below 350 °C). So the reaction between Se and Cu, which is thermodynamically preferential in this temperature region, can be prevented. As the disappearance of CuxSe, the traditional top-to-down crystallization mode was substituted by a homogeneous crystallization mode. Therefore, CZTSSe films with homogeneous crystallization properties were achieved. By using the capping layers, the efficiencies of the solar cells were improved. In particular, the open-circuit voltage (VOC) of the solar cell increased by ~18% by using the capping layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
2. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
3. Analysis of failure modes in kesterite solar cells10.1021/acsaem.8b00194 ↗
4. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
5. Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
6. Effect of Cu–Sn–Se liquid phase on grain growth and efficiency of CZTSSe solar cells10.1002/aenm.201903173 ↗
7. The role of interparticle heterogeneities in the selenization pathway of Cu-Zn-Sn-S nanoparticle thin films: a real-time study10.1039/C5TC01139F ↗
8. A better understanding of the reaction pathways in the formation of Cu2ZnSn(Sx,Se1−x)4thin films10.1016/j.solmat.2017.07.031 ↗
9. Crystallization behaviour of co-sputtered Cu2ZnSnS4 precursor prepared by sequential sulfurization processes10.1088/0957-4484/24/9/095706 ↗
10. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
11. Persistent double-layer formation in kesterite solar cells: a critical review10.1021/acsami.0c10068 ↗
12. Growth and device characteristics of CZTSSe thin-film solar cells with 8.03% efficiency10.1021/acs.chemmater.5b01181 ↗
13. Cu-Rich precursors improve kesterite solar cells10.1002/aenm.201300543 ↗
14. Investigation of combinatorial coevaporated thin film Cu2ZnSnS4 (II): beneficial cation arrangement in Cu-rich growth10.1063/1.4871665 ↗
15. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
16. Nanoscale surface potential variation correlates with local S/Se ratio in solution-processed CZTSSe solar cells10.1021/nl503068h ↗
17. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
18. Controlled grain growth for high performance nanoparticle-based kesterite solar cells10.1021/acs.chemmater.6b02733 ↗
19. The role of hydrogen from ALD-Al2O3 in kesterite Cu2ZnSnS4 solar cells: grain surface passivation10.1002/aenm.201701940 ↗
20. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗