The experi̇mental thermal analysis of aluminum metal melting with concentrated solar energy
Source abstract
Abstract
Abstract The concentrated solar energy which is one of the renewable energy sources, is examined in metal melting which requires high temperatures. The study is carried out for the first time in an environment where total solar radiation of 1394 kWh m−2-year and sunshine duration of 2132 h-year at the sea level in Trabzon province at 41° latitudes and 39° longitudes. In the present work, a single concentrator model of solar furnace system is presented. Parabolic dish with a diameter of 1.42 m was used for the first time with high reflection rate chromium nickel foil in the concentration of the solar rays. To store the concentrated solar beams, a metal melting furnace is designed, manufactured and tested. Total heat loss analysis of the furnace according to measured experimental values is performed for the designed solar furnace. The melting process of the aluminum metal was realized in the furnace. In the experiment, the efficiency of the system was calculated based on the measured temperatures and solar radiations. The system efficiency which consists of the parabolic solar concentrator and the solar furnace was found to be approximately 46% at the average focal temperature of 1023 K. In the melting process, the efficiency of the furnace is calculated as the ratio of stored energy to the absorbed solar energy on the surface. The total thermal efficiency 22% is calculated for the first time in the aluminum melting process and mass flow rate is 0,0667 g s−1 at this time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies · Thermodynamic and Exergetic Analyses of Power and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Report of the first prototype of non-imaging focusing heliostat and its application in high-temperature solar furnace10.1016/S0038-092X(02)00028-2 ↗
2. Investigation of a small scale double-reflector solar concentrating system with high-temperature heat storage10.1016/j.applthermaleng.2011.02.026 ↗
3. Mathematical modeling of the geometrical sizing and thermal performance of a Dish/Stirling system for power generation10.1016/j.renene.2017.01.020 ↗
4. Performance of a low cost solar paraboloidal dish steam generating system10.1016/S0196-8904(99)00133-8 ↗
5. Development of a low-cost dish solar concentrator and its application in zeolite desorption10.1016/j.renene.2005.11.007 ↗
6. Herranz · 2010 · 145
7. Simulation and experimental study on a spiral solid particle solar receiver10.1016/j.apenergy.2013.06.045 ↗
8. Design and analysis of reflectivity for Mylar-coated solar dish
9. Radiation performance of dish solar concentrator cavity receiver systems10.1016/j.solener.2007.06.005 ↗
10. Numerical and experimental investigation of wind effect on a hemispherical cavity receiver10.1016/j.applthermaleng.2017.07.097 ↗
11. Multi objective thermodynamic-based optimization of output power of Solar Dish-Stirling engine by implementing an evolutionary algorithm10.1016/j.enconman.2013.06.030 ↗
12. Designing a solar-powered Stirling heat engine based on multiple criteria: maximized thermal efficiency and power10.1016/j.enconman.2013.06.025 ↗
13. Study on the radiation flux and temperature distributions of the concentrator-receiver system in a solar dish/Stirling power facility10.1016/j.applthermaleng.2011.02.023 ↗
14. Design and analysis of a dead volume control for a solar Stirling engine with induction generator10.1016/j.energy.2015.09.046 ↗
15. Numerical investigation of natural convection heat loss in modified cavity receiver for fuzzy focal solar dish concentrator10.1016/j.solener.2006.11.008 ↗
16. Free convection around immersed bodies
17. Applying the building energy simulation test (BESTEST) diagnostic method to verification of space conditioning equipment models used in whole-building energy simulation programs10.1016/S0378-7788(02)00072-5 ↗
18. Development of a solar concentrator with tracking system10.5194/ms-7-233-2016 ↗
19. Comparative study of different means of concentrated solar flux measurement of solar parabolic dish10.1016/j.enconman.2013.08.058 ↗
20. Optimum performance characteristics of a solar-driven Stirling heat engine system10.1016/j.enconman.2015.03.027 ↗
21. Wind effects on convective heat loss from a cavity receiver for a parabolic concentrating
22. Fraser · 2008
23. Duffie · 1991
24. Vargaftik · 1975
25. Touloukian · 1970
26. The latent heat of fusion of some metals10.1088/1478-7814/38/1/343 ↗
27. Spisz · 1969
28. Thermal performance of a point-focus solar stream generating system, 21 st Annual Internatıonal Conference on Mechanical Engineering
29. Design and construction of a solar collector parabolic dish for rural zones in Colombia10.18180/tecciencia.2013.14.2 ↗
30. Concentrated solar energy used for sintering magnesium titanates for electronic applications10.1016/j.apsusc.2017.09.224 ↗