Hydrogen-doped In2O3 for silicon heterojunction solar cells: Identification of a critical threshold for water content and rf sputtering power
Source abstract
Abstract
Abstract Hydrogen-doped indium oxide (IO:H) layers with very high carrier mobility have been developed by two-step fabrication procedure. In the first step IO:H films were deposited by radio frequency (RF) magnetron sputtering from In2O3 target in Ar/water vapour gas mixtures. Different sputtering powers and partial pressures of H2O (pH2O) have been explored and effects induced by changes of these process parameters on final film structure and on electro-optical properties have been investigated. In the second step a post-deposition annealing under vacuum were performed. During this treatment a complete and complex amorphous-crystalline transition occurred. Growth of large crystalline domains give rise to IO:H films with excellent carrier mobility values, up to 138 cm2/Vs. For each sputtering power used, the pH2O range has been identified which allows to obtain the highest carrier mobility value for IOH post-annealed films. Growth of large crystallites occurred in IO:H annealed films and, at this purpose, a selective chemical etching method has been developed to give better evidence for the polycrystalline grains. IO:H films appeared formed by fairly large crystalline domains with presence of sub-grains. Silicon heterojunction cells fabricated by using IO:H layers as front electrode, compared with those obtained from a conventional ITO showed improved short-circuit current density and the resulting conversion efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Zur elektronentheorie der Metalle
2. Hydrogen-doped In2O3 as high-mobility transparent conductive oxide10.1143/JJAP.46.L685 ↗
3. Reduction of optical loss in hydrogenated amorphous silicon/crystalline silicon heterojunction solar cells by high-mobility hydrogen-doped In2O3 transparent conductive oxide10.1143/APEX.1.041501 ↗
4. Hydrogen-doped In2O3 transparent conducting oxide films prepared by solid-phase crystallization method10.1063/1.3284960 ↗
5. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
6. Amorphous and crystalline In2O3-based transparent conducting films for photovoltaics10.1002/pssa.201600464 ↗
7. Titanium-doped indium oxide: a high-mobility transparent conductor10.1063/1.1995957 ↗
8. Resonant doping for high mobility transparent conductors: the case of Mo-doped In2O3
9. High electron mobility W-doped In2O3In2O3 thin films by pulsed laser deposition Appl
10. Optimization of the deposition and annealing conditions of fluorine-doped indium oxide films for silicon solar cells10.1134/S1063782613030275 ↗
11. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
12. High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells10.1016/j.tsf.2015.03.022 ↗
13. Application of hydrogen-doped In2O3 transparent conductive oxide to thin-film microcrystalline Si solar cells10.1016/j.tsf.2009.08.060 ↗
14. Scherg-Kurmes · 2014 · 381
15. Hydrogenated indium oxide window layers for high-efficiency Cu(In,Ga)Se2 solar cells10.1063/1.4921445 ↗
16. Micromorph thin-film silicon solar cells with transparent high-mobility hydrogenated indium oxide front electrodes10.1063/1.3592885 ↗
17. 13·9%‐efficient CdTe polycrystalline thin‐film solar cells with an infrared transmission of ~50%10.1002/pip.664 ↗
18. Study on the hydrogen doped indium oxide for silicon heterojunction solar cell application10.1016/j.jallcom.2017.02.133 ↗
19. Properties of hydrogenated indium oxide prepared by reactive sputtering with hydrogen gas
20. Reliability aspects of hydrogen-doped indium oxide10.1002/pssa.201532806 ↗
21. Improved electrical properties of pulsed DC magnetron sputtered hydrogen doped indium oxide after annealing in air10.1016/j.mssp.2018.09.012 ↗
22. On the solid phase crystallization of In2O3:H transparent conductive oxide films prepared by atomic layer deposition10.1063/1.4962008 ↗
23. Effect of sputtering power on crystallinity, intrinsic defects, and optical and electrical properties of Al-doped ZnO transparent conducting thin films for optoelectronic devices10.1063/1.4977104 ↗
24. Role of sputtering power on the microstructural and electro-optical properties of ITO thin films deposited using DC sputtering technique10.1002/tee.22494 ↗
25. Midya · 2012 · vol. 1447
26. Effects of rapid thermal annealing on the properties of In2O3 thin films grown on glass substrate by rf reactive magnetron sputtering10.1016/j.mee.2011.03.147 ↗
27. Comparative study of non-annealing and annealing on properties of ITO deposited by RF magnetron sputtering10.4028/www.scientific.net/KEM.659.615 ↗
28. Effect of heat treatment on properties of ITO films prepared by rf magnetron sputtering10.1016/j.vacuum.2004.01.081 ↗
29. Effect of oxygen concentration in the sputtering ambient on the microstructure, electrical and optical properties of radio-frequency magnetron-sputtered indium tin oxide films10.1088/0268-1242/11/2/009 ↗
30. Optimization of sputtered ITO films with respect to the oxygen partial pressure and substrate temperature10.1016/S0040-6090(96)09167-5 ↗
31. Influence of the sputtering system's vacuum level on the properties of indium tin oxide films10.1016/j.tsf.2005.10.068 ↗
32. Structural, electrical and optical properties of transparent conductive ZnO:Ga films prepared by DC reactive magnetron sputtering10.1016/j.jcrysgro.2007.01.037 ↗
33. Effect of the RF sputtering power on microstructural, optical and electrical properties of Al doped ZnO thin films10.1016/j.tsf.2015.06.035 ↗
34. Powder Diffraction File Card No 06-0416 2001 Joint Committee on Powder Diffraction Standards—International Centre for Diffraction Data, Pennsylvania.
35. Jiaye Zhang, Jueli Shi, Dong-Chen Qi, Lang Chen and Kelvin H. L. Zhang, Recent progress on the electronic structure, defect, and doping properties of Ga2O3, Apl. Mater., 8, 020906, 2020 – doi: 10.1063/1.5142999.10.1063/1.5142999 ↗
36. Thickness dependence of In2O3:Sn film growth10.1016/j.tsf.2004.02.094 ↗
37. A microstructural study of low resistivity tin-doped indium oxide prepared by d.c. magnetron sputtering10.1016/0040-6090(94)90646-7 ↗
38. Properties of ITO thin films deposited by RF magnetron sputtering at elevated substrate temperature10.1016/S0921-5107(00)00477-3 ↗
39. Structural study of amorphous InO film by grazing incidence X-ray scattering (GIXS) with synchrotron radiation10.1016/j.tsf.2005.08.256 ↗
40. Application of Nd:YLF laser to amorphous silicon crystallization process10.1016/S0921-5107(99)00300-1 ↗
41. Environmental stability of high mobility indium-oxide based transparent electrodes10.1063/1.4935125 ↗
42. Carrier scattering mechanisms limiting mobility in hydrogen-doped indium oxide10.1063/1.5033561 ↗
43. Hydrogen as a cause of doping in zinc oxide10.1103/PhysRevLett.85.1012 ↗
44. Hydrogen multicentre bonds10.1038/nmat1795 ↗
45. Low-temperature high-mobility amorphous IZO for silicon heterojunction solar cells10.1109/JPHOTOV.2015.2450993 ↗
46. Monica morales-masis and andreas klein, in situ Hall effect monitoring of vacuum annealing of In2O3:H thin films10.3390/ma8020561 ↗
47. Development of new a-Si/c-Si heterojunction solar cells: ACJ-HIT (artificially constructed junction-heterojunction with intrinsic thin-layer)10.1143/JJAP.31.3518 ↗