journal article·2020-07Open access

Recycling of silicon scraps by directional solidification coupled with alternating electromagnetic field and its electrical property

Pengting Li, Ming Lin, Shuhui Tong, Shiqiang Qin, Yi Tan, Dachuan Jiang

Abstract

Abstract In this paper, alternating electromagnetic field and directional solidification are used to separate SiC and Si3N4 in polycrystalline silicon tailings. It is found the inclusion particles move downward at the center of the ingot and moving upward at the edge of the ingot by a variety of forces during the directional solidification process. The electromagnetic force accelerates the melt flow and enhances the lift force, so that larger particles can be pushed to the top of the ingot. Rod-shaped Si3N4 and block-shaped SiC particles show symbiotic relationship between each other. The aggregation of inclusion particles adsorbs metallic impurities, especially volatile metals, due to the effects of mushy region and short-circuit diffusion. The average conversion efficiency of the solar cells (Al-BSF method) prepared using the recycled silicon reached 18.56%, which meets the demand of the solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · Granular flow and fluidized beds · Mineral Processing and Grinding

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. On-wafer investigation of SiC and Si3N4 inclusions in multicrystalline Si grown by directional solidification10.1016/j.solmat.2008.03.007 ↗
2. Formation and distribution of silicon carbide (SiC) precipitates in industrial directional solidification of mc-Si ingots10.1179/1433075X13Y.0000000190 ↗
3. New advances in polysilicon processes correlating feedstock properties and good crystal and wafer performances10.1002/pssc.201100167 ↗
4. A TEM study of SiC particles and filaments precipitated in multicrystalline Si for solar cells10.1016/j.solmat.2008.04.016 ↗
5. Electronic activity of SiC precipitates in multicrystalline solar silicon10.1002/pssa.200675436 ↗
6. Purification of solar grade silicon using electromagnetic field
7. Recovery of high purity silicon from SoG crystalline silicon cutting slurry waste10.1016/S1003-6326(14)63184-8 ↗
8. Rapid recovery of polycrystalline silicon from kerf loss slurry using double-layer organic solvent sedimentation method10.1007/s12613-013-0819-z ↗
9. Recycling of solar cell silicon scraps through filtration, Part I: Experimental investigation10.1016/j.solmat.2008.06.006 ↗
10. Ciftja · 2009
11. Silicon and silicon carbide powders recycling technology from wire-saw cutting waste in slicing process of silicon ingots10.1016/j.seppur.2014.06.036 ↗
12. Separation of silicon and silicon carbide using an electrical field10.1016/j.seppur.2009.04.009 ↗
13. An electromagnetokinetic phenomenon involving migration of neutral particles10.1126/science.117.3032.134 ↗
14. Theory of electromagnetophoresis. I. Magnetohydrodynamic forces experienced by spherical and symmetrically oriented cylindrical particles
15. High-frequency electromagnetic purification of silicon10.1007/s11663-015-0447-2 ↗
16. Removal of SiC particles from solar grade silicon melts by imposition of high frequency magnetic field10.1016/S1003-6326(11)61537-9 ↗
17. Electromagnetic separation of silicon carbide inclusions with aluminum penetration in silicon by imposition of supersonic frequency magnetic field10.1016/j.jclepro.2017.01.041 ↗
18. About the formation and avoidance of C and N related precipitates during directional solidification of multi-crystalline silicon from contaminated feedstock10.1016/j.jcrysgro.2010.02.003 ↗
19. The influence of growth rate on the formation and avoidance of C and N related precipitates during directional solidification of multi crystalline silicon10.1016/j.jcrysgro.2010.02.005 ↗
20. Influence of different vacuum conditions on the distribution of insoluble inclusions in a multi-crystalline silicon ingot10.1016/j.vacuum.2016.03.010 ↗
21. A thermodynamic model for the formation of bubble defects in multicrystalline silicon ingot10.1016/j.applthermaleng.2016.11.136 ↗
22. Particle engulfment and pushing by solidifying interfaces: Part II. Microgravity experiments and theoretical analysis
23. A dynamic model for the interaction between a solid particle and an advancing solid/liquid interface10.1007/s11661-000-0200-5 ↗
24. Liquid convection effects on the pushing-engulfment transition of insoluble particles by a solidifying interface: Part I. Analytical calculation of the lift forces10.1007/s11661-004-0373-4 ↗
25. Melt motion in a Czochralski crystal puller with an axial magnetic field: uncertainty in the thermal Melt motion in a Czochralski crystal puller with an axial magnetic field: uncertainty in the thermal constants10.1016/0022-0248(88)90340-5 ↗
26. Engulfment and pushing of Si3N4 and SiC particles during directional solidification of silicon under microgravity conditions10.1016/j.jcrysgro.2017.05.036 ↗
27. Microstructure and conversion efficiency of multicrystalline silicon ingot prepared by upgraded metallurgical grade silicon10.1016/j.solmat.2018.06.010 ↗