Investigation of dielectric layers laser ablation mechanism on n-PERT silicon solar cells for (Ni) plating process: Laser impact on surface morphology, composition, electrical properties and metallization quality
Source abstract
Abstract
Abstract Laser contact opening is a critical step for solar cells manufacturing and needs to be optimized to achieve high efficiencies. In this paper, laser contact opening using a picosecond laser (wavelength 355 nm, pulse duration 10 ps) has been carried out on n-PERT precursors composed of a SiOx/SiOxNy stack on the rear polished side and a SiOxNy layer on the front textured side. By varying peak fluence from 0.130 J/cm2 to 2.159 J/cm2 and spot overlapping, ninety parameters combinations have been tested to open these dielectric layers. Surface morphology characterization, before and after laser ablation, has been realized using Confocal Laser Scanning Microscopy and Scanning Electron Microscopy. Bulk and surface compositions have also been investigated by Energy Dispersive Spectroscopy and X-ray Photoelectron Spectroscopy analysis, respectively. Results have shown the existence of four separated laser impacted areas on the polished side and a related ablation mechanism is suggested. Also, electrical characterization using four probe measurements and calibrated lifetime photoluminescence revealed that electrical properties of the silicon underlying increased when post laser annealing was performed associated with no spot overlapping. Then, nickel electroless deposition has been performed and first characterizations indicate adherence issues and inhomogeneous metallization. Characterization of metallized samples revealed that these observations were closely linked to the non-homogenous surface morphology and composition after laser ablation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Imprint · 2018
2. Front side metallization of silicon solar cells by direct printing of molten metal10.1016/j.solmat.2018.02.022 ↗
3. Kuang-Chieh · 2017
4. Laser contact opening of high efficient solar cells: on the fly laser processing of PERC solar cells10.1002/latj.201400016 ↗
5. Periodic surface structures on crystalline silicon created by 532nm picosecond Nd:YAG laser pulses10.1016/j.apsusc.2007.06.050 ↗
6. Analysis of laser-induced damage during laser ablation process using picosecond pulse width laser to fabricate highly efficient PERC cells10.1016/j.solener.2014.06.020 ↗
7. Investigation of laser ablation induced defects in crystalline silicon solar cells10.1016/j.egypro.2014.08.040 ↗
8. Non-linear absorption of femtosecond laser pulses in a SiNx layer - influence of silicon doping type10.1016/j.solmat.2013.05.004 ↗
9. Investigation of ablation mechanisms for selective laser ablation of silicon nitride layers10.1016/j.egypro.2011.06.188 ↗
10. G. Poulain, Procédés laser pour la réalisation de cellules photovoltaïques en silicium à haut rendement, Lyon, INSA, 2012. http://www.theses.fr/2012ISAL0099 (accessed November 20, 2017).
11. Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening10.1002/pssr.201510334 ↗
12. Rear-side contact opening by laser ablation for industrial screen-printed aluminium local back surface field silicon wafer solar cells10.1016/j.egypro.2012.07.003 ↗
13. Interface oxides in femtosecond laser structured plated Ni-Cu-Ag contacts for silicon solar cells10.1016/j.solmat.2017.03.016 ↗
14. Investigation of laser irradiated areas with electron backscatter diffraction10.1016/j.egypro.2012.07.099 ↗
15. Challenges facing copper-plated metallisation for silicon photovoltaics: insights from integrated circuit technology development10.1002/pip.3062 ↗
16. Detailed structural and electrical characterization of plated crystalline silicon solar cells10.1016/j.solmat.2018.04.016 ↗
17. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗
18. Femtosecond laser ablation of silicon–modification thresholds and morphology10.1007/s003390100893 ↗
19. Siegel · 1998
20. Influence of pulse duration in picosecond laser ablation of silicon nitride layers10.1016/j.egypro.2011.06.191 ↗
21. Investigation of depth of laser damage to silicon as function of wavelength and pulse duration10.1016/j.egypro.2013.07.348 ↗
22. Picosecond laser texturization of mc-silicon for photovoltaics: a comparison between 1064 nm, 532 nm and 355 nm radiation wavelengths10.1016/j.apsusc.2016.02.187 ↗
23. Benefits of different process routes for industrial direct front side plating10.1016/j.egypro.2017.09.353 ↗
24. Effets du recuit sur les propriétés optiques du silicium amorphe hydrogéné10.1051/jphys:01983004403038700 ↗
25. Moulder · 1992
26. X-ray photoelectron spectroscopic characterization of ultra-thin silicon oxide films on a Mo(100) surface10.1016/0039-6028(92)90748-U ↗
27. Characterization of silicon oxynitride thin films by x-ray photoelectron spectroscopy10.1116/1.582038 ↗
28. Optical and structural properties of SiOx and SiNx materials10.1016/0040-6090(95)06635-7 ↗
29. Band gap energy in silicon10.33697/ajur.2008.010 ↗
30. Annealing and oxidation of silicon oxide films prepared by plasma-enhanced chemical vapor deposition
31. UV and IR laser induced ablation of Al 2 O 3/SiN:H and a-Si:H/SiN:H, EPJ Photovolt
32. Selective laser ablation of SiNx layers on textured surfaces for low temperature front side metallizations10.1002/pip.856 ↗
33. An in situ ATR-FTIR study on palladium displacement reaction on hydrogen-terminated silicon surface10.1149/1.1896326 ↗
34. Impact of the silicon substrates and activation in the nickel electroless plating10.1149/05053.0017ecst ↗
35. Electroless deposition of nickel