journal article·2019-05

Acceptance criteria for accelerated aging testing of silvered-glass mirrors for concentrated solar power technologies

Florian Sutter, Aránzazu Fernández-García, Johannes Wette, Tomás Jesús Reche-Navarro, Lucía Martínez-Arcos

Publisher page

Abstract

Abstract Solar reflectors for Concentrating Solar Power (CSP) technologies are required to maintain their optical properties in demanding environments for more than 20 years of service-life. The durability of the commonly used silvered-glass reflectors is typically qualified by means of accelerated aging. Recently, the Spanish standardization committee UNE has published the first specific standard for this topic, which defines a set of accelerated aging tests for CSP reflectors. However, the standard does not contain pass/fail criteria. This paper proposes useful acceptance criteria for the accelerated tests defined by UNE, helping to interpret the obtained degradation results. The criteria have been determined by analyzing the collected accelerated aging data over the past 5 years in the OPAC laboratory, a joint research group of DLR and CIEMAT. Data from six different 4 mm silvered-glass manufacturers is presented, covering nearly the entire market of commercially available silvered-glass mirrors, and going way beyond the recommended testing times of the UNE standard. The data may be used to benchmark initial reflective properties (before aging) and the performance during accelerated durability testing. In addition, recommendations for improvements of the standard are given and an estimate of the acceleration factor of the Copper Accelerate Salt Spray (CASS) test with respect to a highly corrosive outdoor environment is presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. C. Kennedy, Advances in reflector and solar selective materials for application to concentrating solar power systems, CIMTEC 2010, 5th Forum on new materials, Montecatini Terme, Italy.
2. Modelling of optical durability of enhanced aluminum solar reflectors10.1016/j.solmat.2012.07.027 ↗
3. Optical durability of candidate solar reflectors10.1115/1.1861926 ↗
4. Assessment of the erosion risk of sandstorms on solar energy technology at two sites in Morocco10.1016/j.solener.2018.01.004 ↗
5. Degradation of concentrating solar thermal reflectors in acid rain atmospheres10.1016/j.solmat.2018.06.032 ↗
6. Durability testing of silvered-glass mirrors10.1016/j.egypro.2015.03.110 ↗
7. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
8. Review of accelerated ageing test modelling and its application to solar mirrors10.1016/j.solmat.2018.06.024 ↗
9. Assessment of durability and accelerated aging methodology of solar reflectors
10. F. Sutter, J. Wette, A. Fernández-García, S. Ziegler, R. Dasbach, Accelerated aging testing of aluminum reflectors for concentrated solar power, SolarPaces guideline, available online under: 〈http://www.solarpaces.org/tasks/task-iii-solar-technology-and-advanced-applications〉. Last access: 31st of August 2018.
11. Comparison of degradation on aluminum reflectors for solar collectors due to outdoor exposure and accelerated aging
12. Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments10.1016/j.solener.2018.09.006 ↗
13. F. Sallaberry, A. Bello, J.I. Burgaleta, A. Fernandez-García, J. Fernandez-Reche, J.A. Gomez, S. Herrero, E. Lüpfert, R. Morillo, G. San Vicente, M. Sanchez, P. Santamaria, J. Ubach, J. Terradillos, L. Valenzuela, Standards for components in concentrating solar thermal power plants - status of the Spanish working group, in: Proceedings of the International Conference on Concentrating Solar Power and Chemical Energy Systems, 21th SolarPACES 2015, Cape Town (South Africa), October, pp. 13–16.10.1063/1.4949200 ↗
14. UNE 206016:2018. Paneles reflectantes para tecnologías de concentración solar, 2018.
15. Comparison and evaluation of accelerated aging tests for reflectors10.1016/j.egypro.2014.03.181 ↗
16. ISO 9227:2017. Corrosion tests in artificial atmospheres - Salt spray tests, 2017.
17. ISO 16474-3:2014, Paints and varnishes – Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps, 2014.
18. F. Sutter, F. Wiesinger, P. King, F. Pagano, R. Bayon, G. Imbuluzqueta, A. Pescheux, Report on the methodology of accelerated erosion testing for reflectors and absorbers, STAGE-STE project, 〈https://www.stage-ste.eu/deliverables/STAGE_STE_Deliverable_8.5.pdf〉 Last access: 31st ofAugust 2018.
19. Sand erosion on solar reflectors: accelerated simulation and comparison with field data10.1016/j.solmat.2015.10.036 ↗
20. IEC 61215-2:2016 Terrestrial photovoltaic (PV) modules – Design qualification and type approval. Part 2: Test procedures, 2016.
21. IEC 62108:2007 Concentrator photovoltaic (cpv) modules and assemblies - designed modification and type approval. International electrochemical commission, 2007.
22. J. Wette, F. Sutter, A. Fernández-García, R. Lahlou, P. Armstrong, Standardizing accelerated aging testing conditions for silvered-glass reflectors, in: Proceedings of the Solar Paces Conference 2017, Santiago de Chile, 2017.10.1063/1.5067242 ↗
23. SolarPACES Reflectance Guideline: Parameters and Method to Evaluate the Reflectance Properties of Reflector Materials for Concentrating Solar Power Technology Technology. Version 3.0. March 2018. 〈http://www.solarpaces.org/wp-content/uploads/20180320_SolarPACES-Reflectance-Guidelines-V3.pdf〉 Last access: 31st ofAugust 2018.
24. UNE 206009:2013. Solar Thermal Electric Plants. Terminology, 2013.
25. Equipment and methods for measuring reflectance of concentrating solar reflector materials10.1016/j.solmat.2017.03.036 ↗
26. The effect of incidence angle on the reflectance of solar mirrors10.1016/j.solmat.2017.11.029 ↗
27. M. Montecchi, Proposal of a new parameter for the comprehensive qualification of solar mirrors for CSP applications, in Proceedings of the AIP Conference 1734, 130014; doi: 10.1063/1.4949224, 2016.10.1063/1.4949224 ↗
28. Spectral characterization of specular reflectance of solar mirrors10.1016/j.solmat.2015.10.030 ↗
29. Approximated method for modelling hemispherical reflectance and evaluating near-specular reflectance of CSP mirrors10.1016/j.solener.2013.03.014 ↗
30. Angle resolved specular reflectance measured with VLABS10.1016/j.egypro.2015.03.173 ↗
31. Instrument for measuring the reflectance distribution function of solar reflector materials10.1016/j.egypro.2014.03.227 ↗
32. Development of a spatially resolved reflectometer to monitor corrosion of solar reflectors10.1016/j.optmat.2013.04.013 ↗