journal article·2017-12

A better understanding of the reaction pathways in the formation of Cu2ZnSn(Sx,Se1−x)4 thin films

Solange Temgoua, R. Bodeux, N. Naghavi

Publisher page

Abstract

Abstract This work carries out a study on the reaction pathways during the selenization of Cu-Zn-Sn-S sulfide precursors deposited on Mo/glass. The effect of the annealing temperature on the structural and compositional properties of the materials was studied between 250 and 600 °C combining glow discharge optical emission spectroscopy (GD-OES), x-ray diffraction, and Raman spectroscopy measurements. Through a deep chemical-physical characterization of the front, bulk and back regions of the CZTSSe layers, we show that both diffusion phenomena and the chemical affinity between some elements govern the reaction pathway. The experimental observations support a formation mechanism of CZTSSe that proceeds through two different paths. At the surface, the progressive incorporation of Se triggers the diffusion of Sn to the surface, which results to a fast formation of tin selenides compared to copper selenides. In addition, the predominance of Se-rich CZTSSe is observed at the top part region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
2. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Intermetallic compounds dynamic formation during annealing of stacked elemental layers and its influences on the crystallization of Cu2ZnSnSe4 films10.1016/j.matchemphys.2013.07.021 ↗
5. Real-time observation of Cu 2 ZnSn (S, Se) 4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
6. In-situ investigation of the kesterite formation from binary and ternary sulphides10.1016/j.tsf.2008.11.053 ↗
7. Rapid annealing of reactively sputtered precursors for Cu2ZnSnS4 solar cells
8. H. Yoo, J. Kim, Growth of Cu_{2_{}ZnSnS4 Films by Sputtering with Post‐Sulfurization. AIP Conf. Proc. 23 déc;1399(1):157‑8, 2011.10.1063/1.3666304 ↗
9. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
10. Cu2ZnSnSxO4−x and Cu2ZnSnSxSe4−x: first principles simulations of optimal alloy configurations and their energies10.1063/1.4876447 ↗
11. Growth of Cu2ZnSnSe4 by cosputtering and reactive annealing atmosphere10.1016/j.solmat.2014.08.001 ↗
12. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
13. J.J. Scragg, J.T. Wätjen, M. Edoff, T. Ericson, T. Kubart, C. Platzer-Björkman A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 Thin-Film Solar Cells. J Am Chem Soc [Internet]. 12 nov 2012 [cité19 nov 2012]; Disponible sur: 〈http://pubs.acs.org/doi/abs/10.1021/ja308862n〉.10.1021/ja308862n ↗
14. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
15. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(S,Se)4 based solar cells10.1016/j.tsf.2014.10.058 ↗
16. GaSe formation at the Cu(In,Ga)Se2/Mo interface–a novel approach for flexible solar cells by easy mechanical lift-off10.1002/admi.201400044 ↗
17. M.A. Olgar, B.M. Başol, Y. Atasoy, M. Tomakin, G. Aygun, L. Ozyuzer, et al. Effect of heat treating metallic constituents on the properties of Cu2ZnSnSe4 thin films formed by a two-stage process. Thin Solid Films, 624:167–174. Available from: 〈http://www.sciencedirect.com/science/article/pii/S0040609017300470〉.10.1016/j.tsf.2017.01.037 ↗
18. Cu2ZnSn(S1-xSex)4 thin films for photovoltaic applications: influence of the precursor stacking order on the selenization process
19. The consequences of kesterite equilibria for efficient solar cells
20. Influence of S/Se ratio on series resistance and on dominant recombination pathway in Cu2ZnSn(SSe)4 thin film solar cells10.1016/j.tsf.2012.11.111 ↗
21. Growth of Cu2ZnSnS4 thin films by a two-stage process—Effect of incorporation of sulfur at the precursor stage10.1016/j.solmat.2014.09.035 ↗
22. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
23. Thermodynamic pathway for the formation of SnSe and SnSe2 polycrystalline thin films by selenization of metal precursors10.1039/c3ce41537f ↗
24. Cu2Zn1–xCdxSn(Se1–ySy)_{410.1002/pssa.200776839 ↗
25. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
26. Structural properties of chalcopyrite thin films studied by Raman spectroscopy10.1002/pssb.200541132 ↗
27. Photoluminescence study of defect clusters in Cu2ZnSnS4 polycrystals
28. CZTS monograin powders and thin films10.4028/www.scientific.net/AMR.222.8 ↗
29. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
30. Raman scattering in CuIn(S,Se)2 mixed crystals10.1088/0953-8984/6/49/003 ↗
31. Raman spectroscopy for quality control and process optimization of chalcopyrite thin films and devices10.1016/j.tsf.2006.12.162 ↗
32. Raman effect in Wurtzite- and zinc-blende-type ZnS single crystals10.1103/PhysRev.171.931 ↗
33. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
34. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu[sub 2]ZnSnS[sub 4] layers for solar cell applications10.1063/1.3587614 ↗
35. X. Yin, C. Tang, L. Sun, Z. Shen, H. Gong, Study on Phase Formation Mechanism of Non- and Near-Stoichiometric Cu2ZnSn(S,Se)4 Film Prepared by Selenization of Cu–Sn–Zn–S Precursors. Chem Mater. 25 mars;26(6):2005–2014, 2014.10.1021/cm403423e ↗
36. K. Woo, Y. Kim, W. Yang, K. Kim, I. Kim, Y. Oh, et al. Band-gap-graded Cu2ZnSn(S1-x,Sex)4 Solar Cells Fabricated by an Ethanol-based, Particulate Precursor Ink Route. Sci Rep [Internet]. 29 oct 2013 [cité 4 nov 2013];3. Disponible sur: 〈http://www.nature.com/srep/2013/131029/srep03069/full/srep03069.html〉.10.1038/srep03069 ↗
37. J. Zhong, Z. Xia, M. Luo, J. Zhao, J. Chen, L. Wang, et al. Sulfurization induced surface constitution and its correlation to the performance of solution-processed Cu2ZnSn(S,Se)4 solar cells. Sci Rep [Internet]. 5 sept 2014 [cité 19 mars];4. Disponible sur: 〈http://www.nature.com/srep/2014/140905/srep06288/full/srep06288.html〉.10.1038/srep06288 ↗
38. V. Chawla, B. Clemens Effect of composition on high efficiency CZTSSe devices fabricated using co-sputtering of compound targets. In: 2012 38th IEEE Photovoltaic Specialists Conference (PVSC). 2012. p. 002990–2.10.1109/PVSC.2012.6318212 ↗
39. J. Scragg, Studies of CZTS films prepared by sulfurization of electrodeposited precursors. Bath, 2010.
40. R. Scheer, H.-W. Schock, Thin film material properties. In: Chalcogenide photovoltaics. Wiley VCH; 2009. p. 200.
41. Formation mechanism of Cu2ZnSnSe4 absorber layers during selenization of solution deposited metal precursors10.1016/j.jallcom.2013.03.056 ↗
42. Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2485 ↗
43. Preparation of Cu2ZnSnSe4 solar cells by low-temperature co-evaporation and following selenization10.1063/1.4939445 ↗