Low temperature diffusion and its impact on hydrogenation
Source abstract
Abstract
Abstract The impact of a low temperature diffusion (LTD) step at about 650 °C after emitter diffusion on the performance of silicon solar cells is investigated. Neighbouring wafers from a silicon ingot with and without LTD were chosen to make the cells using screen printed techniques. The efficiency was measured and detailed photoluminescence images were performed for the cells with and without LTD. It is found that LTD can significantly increase the efficiency of the cells about 2% by a gettering effect. The post-firing hydrogen passivation was then applied to the screen printed cells made with and without LTD. The efficiency and photoluminescence image before and after post-firing hydrogen passivation were measured to examine the impact of hydrogenation on the cells made with and without LTD. It is found that cells with LTD can respond better to hydrogenation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Analysis of mono-cast silicon wafers and solar cells on industrial scale10.1016/j.egypro.2012.07.036 ↗
2. Local thermographic efficiency analysis of multicrystalline and cast-mono silicon solar cells10.1109/JPHOTOV.2013.2270355 ↗
3. Gu · 2012 · 101 · 7
4. Evaluation of cast mono silicon material for thermal oxide passivated solar cells10.1016/j.egypro.2013.07.324 ↗
5. Characteristics and value enhancement of cast silicon ingots10.1016/j.solmat.2015.03.007 ↗
6. Structural and electrical characterization of crystallographic defects in silicon ribbons10.1016/0022-0248(80)90252-3 ↗
7. Recent progress in the understanding of crystallographic defects in silicon10.1016/0022-0248(93)90225-L ↗
8. Crystallographic defects in thermally oxidized wafer bonded silicon on insulator (SOI) substrates10.1007/s11664-999-0236-2 ↗
9. Effects of grain boundary on impurity gettering and oxygen precipitation in polycrystalline sheet silicon10.1063/1.1578699 ↗
10. Internal gettering of iron in multicrystalline silicon at low temperature10.1063/1.2987521 ↗
11. Iron point defect reduction in multicrystalline silicon solar cells10.1063/1.2898204 ↗
12. Simulation of Al and phosphorus diffusion gettering in Si10.1016/S0921-5107(99)00370-0 ↗
13. Effect of extended phosphorus diffusion gettering on chromium impurity in HEM multicrystalline silicon10.1016/j.mssp.2011.08.005 ↗
14. Charge state of hydrogen in crystalline silicon10.1103/PhysRevB.43.4545 ↗
15. Hydrogen passivation of silicon surfaces: a classical molecular-dynamics study10.1103/PhysRevB.57.13295 ↗
16. Studies of the hydrogen passivation of silicon grain boundaries10.1063/1.328802 ↗
17. Hydrogen passivation of gold-related deep levels in silicon10.1103/PhysRevB.26.7105 ↗
18. Influence of the screening effect on passivation of p-type silicon by hydrogen10.1134/1.1434507 ↗
19. Hydrogen passivation of defects in EFG ribbon silicon10.1016/S0927-0248(01)00172-6 ↗