Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods
Source abstract
Abstract
In this study, a method to opto-electronically probe the individual junctions and carrier transport across interfaces in fully printed and coated tandem polymer solar cells is described, enabling the identification of efficiency limiting printing/coating defects. The methods used are light beam induced current (LBIC) mapping, External quantum efficiency (EQE) measurements, and monochromatic current–voltage (I–V) characterization. Using these methods, inherent limitations to the accuracy of EQE and LBIC measurements on non-ideal tandem solar cells are identified and described through the use of a small-signal electrical model. The model is able to predict the EQE spectrum of the non-ideal polymer tandem solar cell, using extracted values of shunt- and series resistance of the individual junction of the tandem cell. This finally enables LBIC mapping of the individual junctions of the tandem polymer solar cells, using a combination of light and voltage-biasing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
2. 25th Anniversary Article : Rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
3. Semiconducting polymer-buckminsterfullerene heterojunctions: diodes, photodiodes, and photovoltaic cells10.1063/1.108863 ↗
4. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
5. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
6. Solar cell efficiency tables (version 42)10.1002/pip.2352 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Efficient tandem and triple-junction polymer solar cells10.1021/ja401434x ↗
9. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
10. Life cycle analysis of organic tandem solar cells: when are they warranted?10.1016/j.solmat.2013.09.013 ↗
11. Highly efficient organic tandem solar cells: a follow up review10.1039/c3ee40388b ↗
12. Recent trends in polymer tandem solar cells research10.1016/j.progpolymsci.2013.04.005 ↗
13. Tandem polymer photovoltaic cells – current status, challenges and future outlook10.1039/c0ee00754d ↗
14. Organic tandem and multi-junction solar cells10.1002/adfm.200700517 ↗
15. A robust inter-connecting layer for achieving high performance tandem polymer solar cells10.1002/adma.201100221 ↗
16. A solution process for inverted tandem solar cells10.1016/j.orgel.2010.11.017 ↗
17. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
18. Photovoltaic performance of polymers based on dithienylthienopyrazines bearing thermocleavable benzoate esters10.1021/ma9024812 ↗
19. All solution processed tandem polymer solar cells based on thermocleavable materials10.1016/j.solmat.2008.05.005 ↗
20. Insoluble patterns of cross-linkable conjugated polymers from blend demixing in spin cast films10.1021/ma901329n ↗
21. A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers10.1016/j.solmat.2013.07.006 ↗
22. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
23. OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools10.1039/c3ta01611k ↗
24. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
25. Measuring the current density – voltage characteristics of individual subcells in two-terminal polymer tandem solar cells10.1016/j.orgel.2011.01.014 ↗
26. Measuring the external quantum efficiency of two-terminal polymer tandem solar cells10.1002/adfm.201001167 ↗
27. 2D characterization of OPV from single and tandem cells to fully roll-to-roll processed modules with and without electrical contact10.1002/adom.201400016 ↗
28. Some investigations on the influence of defects/grain boundaries on photovoltaic mechanisms in polycrystalline silicon films10.1016/0379-6787(80)90070-8 ↗
29. Silicon-silicon interfaces10.1063/1.93029 ↗
30. Light-beam-induced current characterization of grain boundaries10.1063/1.333047 ↗
31. Printed metal back electrodes for r2r fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
32. Spatially distributed model for the analysis of laser beam induced current (LBIC) measurements of thin film silicon solar modules10.1016/j.solmat.2010.02.020 ↗
33. Multi-laser LBIC system for thin film PV module characterisation10.1016/j.solmat.2008.10.019 ↗
34. Determining the photocurrent of individual cells within an organic solar module by LBIC and the filtering approach – experiments and simulations10.1016/j.solmat.2014.11.032 ↗
35. Injection-level dependent series resistance: comparison of CELLO and photoluminescence-based measurements10.1016/j.egypro.2013.07.268 ↗
36. CELLO: an advanced LBIC measurement technique for solar cell local characterization10.1016/S0927-0248(02)00270-2 ↗
37. CELLO measurement technique for local identification and characterization of various types of solar cell defects10.1002/pssc.201083997 ↗
38. J.M. Frey, S.S. Hegedus, C.P. Thompson, Quantitative analysis and extraction of cell parameters from interconnected thin-film solar modules through LBIC-voltage sweeps, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 001277–001282.10.1109/PVSC.2010.5614216 ↗
39. J.R. Finn, B.R. Hansen, J.E. Granata, Multiple junction cell characterization using the LBIC method: early results, issues, and pathways to improvement, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2009, pp. 000564–000569.10.1109/PVSC.2009.5411621 ↗
40. Application of LBIC measurements for characterisation of triple junction solar cells10.1016/j.physb.2013.11.052 ↗
41. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
42. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
43. Enabling flexible polymer tandem solar cells by 3d ptychographic imaging
44. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
45. Combined effects of shunt and luminescence coupling on external quantum efficiency measurements of multijunction solar cells10.1109/JPHOTOV.2011.2172188 ↗
46. A self-calibrating led-based solar test platform10.1002/pip.963 ↗
47. Spectral response measurements of monolithic GaInP/Ga(In)As/Ge triple-junction solar cells: measurement artifacts and their explanation10.1002/pip.514 ↗
48. To bias or not to bias? an how-to guide for spectral response measurements of thin film multi-junction photovoltaic modules10.1557/opl.2012.838 ↗
49. Voltage and light bias dependent quantum efficiency measurements of GaInP/GaInAs/Ge triple junction devices10.1016/j.solmat.2013.04.010 ↗
50. Measuring the external quantum efficiency of two-terminal polymer tandem solar cells10.1002/adfm.201001167 ↗
51. Elimination of artifacts in external quantum efficiency measurements for multijunction solar cells using a pulsed light bias10.1109/JPHOTOV.2012.2216512 ↗
52. Elimination of artifacts in external quantum efficiency measurements of multijunction solar cells using a pulsed voltage bias10.1109/JPHOTOV.2013.2242959 ↗
53. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
54. Electronic memory effects in diodes from a zinc oxide nanoparticle–polystyrene hybrid material10.1063/1.2345612 ↗
55. Electrical and photo-induced degradation of zno layers in organic photovoltaics10.1002/aenm.201100227 ↗