PEDOT:PSS-free organic solar cells fabricated on buffer and anode integrated Ta-doped In2O3 films
Source abstract
Abstract
Abstract We developed poly(3,4-ethylene dioxylene thiophene):poly(styrene sulfonic acid) (PEDOT:PSS)-free organic solar cells (OSCs) using buffer and anode-integrated Ta-doped In 2 O 3 (ITaO) films. By co-sputtering of Ta 2 O 5 and In 2 O 3 targets, we obtained buffer and anode-integrated ITaO electrodes with a sheet resistance of 17.11 Ω/square, a transmittance of 93.45%, and a work function of 4.9 eV, all of which are comparable to conventional ITO anodes. Since ITaO electrodes have similar electrical and optical transmittance to those of ITO films, the conventional bulk heterojunction OSC with ITaO anode showed a power conversion efficiency ( PCE ) of 3.348% similar to the OSCs (3.541%) with an ITO anode. In addition, OSCs fabricated on an ITaO electrode successfully operated without an acidic PEDOT:PSS buffer layer and showed a PCE of 2.634%, which was much higher than the comparable OSC with an ITO anode. Therefore, co-sputtered ITaO films simultaneously acting as a buffer and an anode layer can be considered promising transparent electrodes for cost-efficient and reliable OSCs because they can eliminate the use of an acidic PEDOT:PSS buffer layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Polymer photovoltaic cells: enhanced efficiencies vis a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
3. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
4. Flexible long-lived large-area organic solar cells10.1016/j.solmat.2006.10.013 ↗
5. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
6. A microstructural study of low resistivity tin-doped indium oxide prepared by d.c. magnetron sputtering10.1016/0040-6090(94)90646-7 ↗
7. Electrical and structural properties of tin-doped indium oxide films deposited by DC sputtering at room temperature10.1143/JJAP.38.2921 ↗
8. Roll-to-roll fabrication of monolithic large area polymer solar cells free from indium tin oxide10.1016/j.solmat.2009.04.020 ↗
9. Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells10.1016/j.orgel.2008.10.003 ↗
10. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
11. Stability of the interface between indium–tin–oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
12. p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
13. Efficient inverted polymer solar cells10.1063/1.2174093 ↗
14. The effects of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗
15. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
16. Buffer and anode-integrated WO3-doped In2O3 electrodes for PEDOT:PSS-free organic photovoltaics10.1016/j.orgel.2013.02.025 ↗
17. Low resistivity indium tantalum oxide films by magnetron sputtering10.1007/s00339-004-2593-2 ↗
18. B. Wang, L. Hu, F. Liu, L. Qin, Y. Liu, L. Wang, Ta-doped In2O3 transparent conductive films with high transmittance and low resistance, Opt. Appl. XL 1 (2010) 25–31
19. Mechanochemical synthesis of indium complex oxides (InAO4; A=P, V, Nb, Ta, Sb) and their solid solutions10.1007/s10853-006-1472-y ↗
20. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
21. Thermal evolution and electrical correlation of defect states in Hf-based high-k dielectrics on n-type Ge (100): local atomic bonding symmetry10.1063/1.3236679 ↗
22. Transparent and flexible amorphous In–Si–O films for flexible organic solar cells10.1063/1.4788687 ↗
23. A microstructural study of low resistivity tin-doped indium oxides prepared by d.c. magnetron sputtering10.1016/0040-6090(94)90646-7 ↗
24. Crystallization and electrical property change on the annealing of amorphous indium-oxide and indium–tin–oxide thin films10.1016/S0040-6090(99)00749-X ↗
25. Characteristics of zirconium-doped indium tin oxide thin films deposited by magnetron sputtering10.1016/j.solmat.2008.04.019 ↗
26. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
27. Core-level shifts and oxidation states of Ta and W: electron spectroscopy for chemical analysis applied to surfaces10.1103/PhysRevB.30.7236 ↗
28. Effect of MoO3 doping power on the electrical, optical, and structural properties of MoO3-doped In2O3 anodes for organic solar cells10.1116/1.4758789 ↗
29. Correlations between the electronic properties of doped indium oxide ceramics and the nature of the doping element10.1016/0921-5107(92)90339-B ↗
30. Highly near-infrared transparent GeO2-doped In2O3 electrodes for bulk heterojunction organic solar cells10.1016/j.solmat.2012.07.016 ↗
31. Effect of UV–ozone treatment on ITO and post-annealing on the performance of organic solar cells10.1016/j.synthmet.2008.11.024 ↗
32. Influence of the anodic work function on the performance of organic solar cells10.1002/1439-7641(20020916)3:9<795::AID-CPHC795>3.0.CO;2-A ↗
33. Focused ion beam assisted investigations of Al interface in polythiophene: fullerene solar cells10.1016/j.solmat.2012.09.022 ↗