Erosion wear analysis of heat exchange surfaces in a falling particle-based concentrating solar power system
Source abstract
Abstract
Next generation concentrating solar power (CSP) plants that use solid particles as the heat transfer and storage medium provide opportunities for higher temperature operation, higher efficiency, and lower levelized cost. However, falling particles over component material surfaces can cause significant erosion, severely limiting the performance and operational service life of the components. An understanding of the particle erosion wear of heat transfer surfaces is imperative for designing components and operating conditions to minimize wear. Considering a shell-and-tube heat exchanger configuration, this study presents a computational analysis coupling falling particle flow around heat exchanger tubes and particle-scale erosion of the tube surfaces governed by the Finnie model. Several tube arrangements, particle flow and geometric parameters, and tube material parameters are systematically investigated for their effects on the erosion rate spatially and with time. Parameters that influence the erosion depth, the cumulative mass loss rate and the maximum erosion rate are elucidated. The results of the study may be used to help identify locations that experience the most erosion and devise ways for targeted erosion mitigation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Design considerations for commercial scale particle-based thermal energy storage systems10.1063/5.0086995 ↗
2. Testing and simulations of spatial and temporal temperature variations in a particle-based thermal energy storage bin
3. Numerical investigation on the flow behavior of a novel fluidization based particle thermal energy storage (FP-TES)10.1016/j.energy.2020.117528 ↗
4. Fractal textured surfaces for high temperature corrosion mitigation in molten salts10.1016/j.solmat.2021.111281 ↗
5. Mehos · 2017
6. Numerical modelling of radiation absorption in a novel multi-stage free-falling particle receiver10.1016/j.ijheatmasstransfer.2019.118821 ↗
7. Optimizing a falling particle receiver geometry using CFD simulations to maximize the thermal efficiency10.1063/5.0029331 ↗
8. A high-temperature thermal stability and optical property study of inorganic coatings on ceramic particles for potential thermal energy storage applications10.1016/j.solmat.2022.111679 ↗
9. Heat transfer models of moving packed-bed particle-to-sCO2 heat exchangers10.1115/1.4041546 ↗
10. Evaluating the effective solar absorptance of dilute particle configurations
11. Fluidized bed technology for concentrating solar power with thermal energy storage10.1115/1.4027262 ↗
12. Development of a concentrating solar power system using fluidized-bed technology for thermal energy conversion and solid particles for thermal energy storage10.1016/j.egypro.2015.03.136 ↗
13. Granular flow and heat-transfer study in a near-blackbody enclosed particle receiver10.1115/1.4030970 ↗
14. Development and evaluation of a prototype solid particle receiver: on-sun testing and model validation10.1115/1.4001146 ↗
15. Physical properties of solid particle thermal energy storage media for concentrating solar power applications10.1016/j.egypro.2014.03.109 ↗
16. Advances in central receivers for concentrating solar applications10.1016/j.solener.2017.03.048 ↗
17. Advances in concentrated solar absorber designs10.1088/1742-6596/2054/1/012038 ↗
18. Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants10.1002/est2.63 ↗
19. On the influence of rotation on thermal convection in a rotating cavity for solar receiver applications10.1016/j.applthermaleng.2014.03.059 ↗
20. Prototype testing of a centrifugal particle receiver for high-temperature concentrating solar applications10.1115/1.4030657 ↗
21. Thermal performance of a quartz tube solid particle air receiver10.1016/j.egypro.2014.03.031 ↗
22. Theoretical and experimental study of radiant heat transfer in a solar fluidized-bed receiver10.1002/aic.690280402 ↗
23. Measurement and analysis of thermal conductivity of ceramic particle beds for solar thermal energy storage10.1016/j.solmat.2021.111271 ↗
24. FP-TES: fluidization based particle thermal energy storage, Part II: experimental investigations10.3390/en13174302 ↗
25. A new numerical method for determining heat transfer and packing distribution in particle heat exchangers for concentrated solar power10.1016/j.ijheatfluidflow.2021.108805 ↗
26. Design analysis of a particle-based thermal energy storage system for concentrating solar power or grid energy storage10.1016/j.est.2020.101382 ↗
27. FP-TES: a fluidisation-based particle thermal energy storage, Part I: numerical investigations and bulk heat conductivity10.3390/en13174298 ↗
28. Wear by hard particles
29. On the size effect in abrasive and erosive wear10.1016/0043-1648(81)90062-4 ↗
30. The effect of erodent particle hardness on the erosion of stainless steel10.1016/j.wear.2015.01.017 ↗
31. Relationship between surface hardness and erosion damage caused by solid particle impact10.1016/0043-1648(93)90067-V ↗
32. Effects of surface hardness and other material properties on erosive wear of metals by solid particles10.1115/1.3443422 ↗
33. Erosion of surfaces by solid particles10.1016/0043-1648(60)90055-7 ↗
34. On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence10.1016/0043-1648(78)90147-3 ↗
35. Practical estimation of erosion damage caused by solid particle impact10.1016/j.wear.2005.01.039 ↗
36. Effect of temperature on abrasion erosion in particle based concentrating solar powerplants10.1016/j.solener.2021.06.080 ↗
37. Experimental investigation of low velocity and high temperature solid particle impact erosion wear
38. High temperature solid particle erosion behaviour of SS 316L and thermal sprayed WC-Cr3C2–Ni coatings
39. On the sliding wear and solid particle erosion behaviour of HVOF-sprayed CoNiCrAlY coatings and NiCrCoTi substrates in dependence of the oxidation dwell time at 900 °C10.1016/j.surfcoat.2022.129137 ↗
40. High-temperature solid particle erosion of Cr–Ni–Fe–C arc cladded coatings
41. Abrasion erosion modeling in particulate flow10.1016/j.wear.2017.01.042 ↗
42. Finite element and experimental investigation of multiple solid particle erosion on Ti-6Al-4V titanium alloy coated by multilayer wear-resistant coating10.1016/j.surfcoat.2019.05.042 ↗
43. Numerical study of impact erosion of multiple solid particle10.1016/j.apsusc.2017.06.132 ↗
44. Multiscale investigation of tube erosion in fluidized bed based on CFD-DEM simulation10.1016/j.ces.2018.02.050 ↗
45. Experimental investigation of the performance of a shell-and-tube particle-to-air heat exchanger10.1016/j.solener.2020.04.062 ↗
46. Experimental study of a sand–air heat exchanger for use with a high-temperature solar gas turbine system10.1115/1.4007585 ↗
47. The effect of solid particles on crossflow heat transfer in a tube array10.1016/0894-1777(92)90005-P ↗
48. Analysis of micro and nano particle erosion by the numerical method at different pipe bends and radius of curvature10.1080/01430750.2019.1621198 ↗
49. Constrained dynamics of an inertial particle in a turbulent flow10.1088/1742-6596/318/5/052016 ↗
50. Lagrangian simulation of large and small inertial particles in a high Reynolds number flow : stochastic simulation of subgrid turbulence/particle interactions
51. Some observations on the erosion of ductile metals10.1016/0043-1648(72)90444-9 ↗
52. 2020