journal article·2023-12

Mesoporous aluminium titanate: Superhydrophilic and photocatalytic antireflective coating for solar glass covers with superior mechanical properties

Deepanjana Adak, Poulami Mondal, Raghunath Bhattacharyya, Sandip Bysakh, Harish C. Barshilia

Publisher page

Abstract

In this study, the results of non-stoichiometric mesoporous aluminum titanate (mp-Al xTiO y ) coating using sol-gel-based block copolymers assisted evaporation-induced self-assembly (EISA) have been presented. Here, a remarkably durable superhydrophilic coating with photocatalytic and anti-reflecting properties has been reported. With a Vicker`s Hardness of 899 HV, mp-Al xTiO y coating on glass substrate indicates outstanding mechanical durability when exposed to the outside environment. Further, conventional accelerated ageing tests like the UV exposure test, damp-heat test, and saline resistance test were conducted to evaluate the endurance of the coating. By measuring the water contact angle, it has been proven that this coating is superhydrophilic. It has been shown through time-dependent degradation of (methylene blue, MB) dye; mp-Al xTiO y possesses photocatalytic capabilities similar to mp-TiO 2. Additionally, the mp-Al xTiO y coatings were found to exhibit improved optical transmittance and a reduced refractive index value. The power gain of a conventional Si solar cell was finally studied by examining the I–V characteristics of mp-Al xTiO y coated glass coupons attached to the solar cell.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Self-cleaning coatings10.1039/b412803f ↗
2. Can anti-soiling coating on solar glass influence the degree of performance loss over time of pv modules drastically?
3. Self–cleaning superhydrophobic coatings: potential industrial applications10.1016/j.porgcoat.2018.12.008 ↗
4. Lotus effect and super-hydrophobic coatings for concentrated solar power systems (CSP)
5. Facile creation of a super-amphiphobic coating surface with bionic microstructure10.1002/adma.200306281 ↗
6. A state-of-the-art review on the multifunctional self-cleaning nanostructured coatings for PV panels, CSP mirrors and related solar devices10.1016/j.rser.2022.112145 ↗
7. The role of multiscale roughness in the lotus effect: is it essential for super-hydrophobicity?10.1021/la3029512 ↗
8. Self-cleaning hybrid hydrophobic–hydrophilic surfaces: durability and effect of artificial soilant particle type10.1109/JPHOTOV.2019.2955559 ↗
9. Mechanical stability of surface architecture—consequences for superhydrophobicity10.1021/am505487r ↗
10. Transparent superhydrophilic and superhydrophobic nanoparticle textured coatings: comparative study of anti-soiling performance10.1039/C8NA00349A ↗
11. Self-cleaning glazing products: a state-of-the-art review and future research pathways10.1016/j.solmat.2012.09.034 ↗
12. Photocatalytic, self-cleaning, antireflective coating for photovoltaic panels: characterization and monitoring in real conditions10.1016/j.solener.2017.10.088 ↗
13. Durability testing of a newly developed hydrophilic anti-soiling coating for solar reflectors10.1063/1.5117665 ↗
14. Non lithographic block copolymer directed self-assembled and plasma treated self-cleaning transparent coating for photovoltaic modules and other solar energy devices10.1016/j.solmat.2018.08.011 ↗
15. Light-induced amphiphilic surfaces10.1038/41233 ↗
16. Ras · 2016
17. Preparation of ordered mesoporous alumina-doped titania films with high thermal stability and their application to high-speed passive-matrix electrochromic displays10.1002/chem.201300737 ↗
18. Microstructural features and mechanical properties of Al2O3-Al2TiO5 composite processed by gel assisted ceramic extrusion10.1179/096797801125000393 ↗
19. Farmer · 1974
20. In situ FTIR studies of primary intermediates of photocatalytic reactions on nanocrystalline TiO2 films in contact with aqueous solutions10.1021/ja029503q ↗
21. Novel approach for sol–gel synthesis of nanosize aluminium titanate10.1179/1433075X13Y.0000000130 ↗
22. Application of nanostructured aluminium titanate (Al2TiO5) photocatalyst for removal of organic pollutants from water: influencing factors and kinetic study10.1016/j.matchemphys.2020.123740 ↗
23. FTIR and Raman characterization of TiO2 nanoparticles coated with polyethylene glycol as carrier for 2-Methoxyestradiol10.3390/app7010049 ↗
24. Near-ultraviolet optical absorption behavior of TiO2–Al2O3 multilayer films10.1063/1.2207723 ↗
25. Study of β-Al2TiO5 thin films by XPS10.1116/11.20001102 ↗
26. Soft-templating synthesis and properties of mesoporous alumina–titania10.1016/j.micromeso.2009.08.018 ↗
27. An ESCA method for determining the oxide thickness on aluminum alloys10.1002/sia.740150109 ↗
28. Structural evolution during reaction to form aluminum titanate from sol-gel precursors10.1081/AMP-200028090 ↗
29. Preparation of nitrogen-doped aluminium titanate (Al2TiO5) nanostructures: application to removal of organic pollutants from aqueous media10.1016/j.apt.2020.06.020 ↗
30. Photocatalytic activity of Ag/Al2O3–Gd2O3 photocatalysts prepared by the sol–gel method in the degradation of 4-chlorophenol10.1039/C7RA12665D ↗
31. Correlation between optical, morphological, and compositional properties of aluminum nitride thin films by pulsed laser deposition10.1109/JSEN.2015.2466467 ↗
32. Structure, mechanical and tribological properties of Me-doped diamond-like carbon (DLC) (Me= Al, Ti, or Nb) hydrogenated amorphous carbon coatings10.3390/coatings8100370 ↗
33. Optical and RF transparent protective alumina thin films10.1007/s10854-015-3638-3 ↗
34. XPS and FTIR surface characterization of TiO2 particles used in polymer encapsulation10.1021/la0015213 ↗
35. Black hydroxylated titanium dioxide prepared via ultrasonication with enhanced photocatalytic activity
36. Optoelectronic and photocatalytic properties of in situ platinum-doped TiO2 films deposited by means of pulsed laser ablation technique10.1007/s10854-016-5925-z ↗
37. Properties of aluminum titanate films prepared by chemical vapor deposition under different aluminum butoxide inputs10.1016/j.tsf.2004.10.021 ↗
38. Creation of high-refractive-index amorphous titanium oxide thin films from low-fractal-dimension polymeric precursors synthesized by a sol–gel technique with a hydrazine monohydrochloride catalyst10.1021/la3015139 ↗
39. Are aluminium titanate-based nanostructures new photocatalytic materials? Possibilities and perspectives10.1016/j.jphotochem.2017.11.043 ↗
40. Comparison of modification strategies towards enhanced charge carrier separation and photocatalytic degradation activity of metal oxide semiconductors (TiO2, WO3 and ZnO)10.1016/j.apsusc.2016.07.081 ↗
41. Characterization of Cu/Ni multilayer coatings by nanoindentation and atomic force microscopy10.1016/S0257-8972(02)00008-7 ↗
42. An abrasion-resistant and broadband antireflective silica coating by block copolymer assisted sol–gel method10.1021/la502397e ↗
43. Cost-effective nanoporous SiO2–TiO2 coatings on glass substrates with antireflective and self-cleaning properties10.1016/j.apenergy.2013.03.043 ↗
44. Hydrophobic, antireflective, self-cleaning, and antifogging sol−gel coatings: an example of multifunctional nanostructured materials for photovoltaic cells10.1021/cm100937e ↗
45. In situ alumina/aluminum titanate bulk ceramic composites prepared by SPS from different structured composite powders10.1016/j.jallcom.2009.03.129 ↗
46. Gel-assisted extrusion of alumina10.1080/0371750X.2000.10799906 ↗
47. Fabrication and property evaluation of the Al2O3-TiO2 composite coatings prepared by plasma spray10.3390/coatings10111122 ↗
48. IEC 61215 qualification tests vs outdoor performance using module level in situ I-V curve tracing devices
49. Effect of UV irradiation on PV modules and their simulation in newly designed site-specific accelerated ageing tests10.1016/j.solener.2023.02.042 ↗
50. Accelerated aging tests vs field performance of PV modules10.1088/2516-1083/ac890a ↗
51. Preparation of humidity, abrasion, and dust resistant antireflection coatings for photovoltaic modules via dual precursor modification and hybridization of hollow silica nanospheres10.1016/j.solmat.2018.12.032 ↗