Effect of rare metal oxide doped lead-based glass frits on the performance of crystalline silicon solar cells
Source abstract
Abstract
:Based on the study of traditional lead-based glass frit systems, in this work, melt-quenching method was used to prepare a type of rare metal oxide-doped glass frit. The influence of the composition of glass frit on the softening temperature of the glass frit, the cross-sectional structure, the surface morphology of the front electrode grid line of the solar cell, the contact interface structure, and the electrical properties of the solar cell were studied by X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray Spectroscopy (EDS), High stage microscope (HSM), X-ray photoelectron spectroscopy (XPS) and Differential Scanning Calorimeter (DSC). The results indicated that the characteristic temperature points of the glass frits doped with metal oxides were superior to those of traditional glass frits. In addition, the glass frits doped with both metal oxides could be completely melted at approximately 626 °C. When glass frits were introduced into the grid line of the front electrode for a solar cell, the silver powder could dissolve and etch the anti-reflection film, forming a thin glass layer containing a large number of silver crystals and an Ag–Pb eutectic alloy at the Ag–Si contact interface. This provided an effective approach for electronic transmission, thereby promoting the formation of good ohmic contact. Consequently, compared with the solar cells made of traditional glass frit, the monocrystalline silicon solar cells composed of glass frit doped with rare metal oxides had a lower series resistance value (2.41 mΩ) and higher photoelectric conversion efficiency (22.62%).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Renewable and non-renewable energy consumption and economic growth: revisiting the issue with an asymmetric point of view10.1016/j.energy.2018.03.128 ↗
2. Recent advances in methods, policies and technologies at sustainable energy systems development10.1016/j.energy.2022.123276 ↗
3. Performance of hybrid energy devices consisting of photovoltaic cells and thermoelectric generators10.1021/acsami.9b18652 ↗
4. Review on photovoltaic/thermal hybrid solar collectors: classifications, applications and new systems10.1016/j.solener.2020.07.062 ↗
5. Toward efficient perovskite solar cells: progress, strategies, and perspectives10.1021/acsenergylett.2c00592 ↗
6. Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: a review10.1016/j.rser.2021.112047 ↗
7. Review on the effect of compact layers and light scattering layers on the enhancement of dye-sensitized solar cells10.1016/j.solener.2020.12.030 ↗
8. Status and perspectives of crystalline silicon photovoltaics in research and industry
9. An analytical investigation on characterizing the properties of glass composition for crystalline silicon solar cells based on the digital microsystem measurement technology, Solar Energy Mater
10. The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates10.1016/j.matdes.2021.109453 ↗
11. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells, Solar Energy Mater
12. Formation of a highly conductive thick film by low-temperature sintering of silver paste containing a Bi2O3-B2O3-ZnO glass frit10.1016/j.jmatprotec.2018.09.029 ↗
13. Silver powder effectiveness and mechanism of silver paste on silicon solar cells10.1016/j.jallcom.2012.09.018 ↗
14. Effect of Pb-Te-O glasses on Ag thick-film contact in crystalline silicon solar cells, Solar Energy Mater
15. Efficiency boost in Si-based solar cells using tellurite glass cover layer doped with Eu3+ and silver nanoparticles10.1016/j.optmat.2018.11.028 ↗
16. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗
17. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells10.1016/j.solmat.2019.110040 ↗
18. Review on metallization in crystalline silicon solar cells
19. Enhanced interfacial wettability change materials based on graphene-doped Pb-Te-Si glass frit for wide sintering window of solar cells, Solar Energy Mater
20. Effect of basicity of glass frits on electrical properties of Si solar cells, Solar Energy Mater
21. Effect of composition of front-electrode-paste glass on electrical performance of multicrystalline silicon solar cells10.1007/s10854-017-6394-8 ↗
22. Physical understanding of printed thick-film front contacts of crystalline Si solar cells–Review of existing models and recent developments, Solar Energy Mater
23. Effect of Al2O3 film on silver paste contact formation at silicon surface10.1016/j.solener.2017.10.012 ↗
24. Thermal stability and non-isothermal crystallization kinetics of Pd 82 Si 18 amorphous ribbon
25. EPR and FTIR spectroscopic studies of MO-Al2O3-Bi2O3-B2O3-MnO2(M=Pb, Zn and Cd) glasses10.1088/2053-1591/aab64d ↗
26. Thermal and structural investigations of xLi2O-(1-x)Bi2O3 (0.25≤x≤0.35) glasses10.1111/ijag.12342 ↗
27. Functionally graded IT-MOFC electrolytes based on highly conductive δ-Bi2O3-0.2wt% B2O3 composite with molten grain boundaries10.1021/acsaem.9b01330 ↗
28. Effect of Te-based glass on contact formation and electrical properties in Si solar cells10.1016/j.jallcom.2020.154500 ↗
29. Preparation and investigation of graphene-coated lead-free glass frit based on amino dispersant for improved adhesion and lower temperature point10.1016/j.diamond.2020.108213 ↗
30. Effect of TeO2 on Ag/Si interface contact of crystalline silicon solar cells10.1016/j.matlet.2022.132752 ↗
31. Effect of TeO2-based lead-free glass on contact formation of front side silver metallization for monocrystalline silicon solar cells, Solar Energy Mater
32. High-efficiency crystalline-Si solar cells with screen-printed front-side metallization: a percolation model to explain the current path10.1007/s11664-016-4818-5 ↗
33. Effect of sub-micrometer sized silver particle on the performance of the front Ag paste for c-Si solar cells10.1016/j.jallcom.2018.01.321 ↗
34. Investigation of SiO2-B2O3-ZnO-Bi2O3 glass frits on the interface reaction of silver front contacts10.1016/j.jallcom.2020.157646 ↗
35. High-efficiency, single-crystalline, p-and n-type Si solar cells: microstructure and chemical analysis of the glass layer. Solar Energy Mater
36. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗