An orthogonal investigation in pore size effect of EG on thermal properties and crystallinity of EG/CaCl2·6H2O composite
Source abstract
Abstract
Porous expanded graphite (EG), a typical carbon-based porous material, is an effective encapsulating material for hydrated salts. Recently, the EG/hydrated salts composites have emerged as promising hybrid PCMs for energy storage and temperature regulation. However, the pore size effect of EG on the thermal properties of the EG/hydrated salts has not been thoroughly investigated. In this work, an orthogonal analysis is carried out to investigate the pore size effect of EG on the absorption of hydrated salts, and the thermal properties as well as crystallization properties of the EG/CaCl 2·6H 2O composites. The mesh number is determined as the primary factor that affecting the enthalpy and crystal matching rate of the EG/CaCl 2·6H 2 O composites. The EG with larger mesh has smaller pore size, which accounts for greater surface tension and capillary force to absorb the CaCl 2·6H 2O into the pores of EG. The EG/CaCl 2·6H 2 O with lager EG mesh number exhibits larger latent heat, higher thermal conductivity, and improved crystallization behavior. The optimal EG/CaCl 2·6H 2O composites with EG (100 mesh, 700 W, 30 s) possesses the largest enthalpy of 167.4 J g −1 and highest thermal conductivity of 3.886 W/(m·K). The thermal conductivity of the optimum EG/CaCl 2·6H 2O is 6.2 times higher than that of CaCl 2·6H 2O. Moreover, the subcooling of CaCl 2·6H 2 O was inhibited when it was combined with EG. The phase change gypsum board with 5 wt% optimum EG/CaCl 2·6H 2O composite shows remarkable temperature-delay performance and high stability after 100 thermal cycles, demonstrating great potential for using as heat storage material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Advanced Battery Materials and Technologies · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A review on current status and challenges of inorganic phase change materials for thermal energy storage systems10.1016/j.rser.2016.12.012 ↗
2. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
3. Phase change behaviour of some latent heat storage media based on calcium chloride hexahydrate10.1016/j.solener.2008.09.004 ↗
4. Preparation, characterization, and thermal properties of the microencapsulation of a hydrated salt as phase change energy storage materials10.1016/j.tca.2013.01.019 ↗
5. Thermal, spectral and microscopic studies of water-rich hydrate of the type Mg2KH(PO4)2·15H2O. Thermal transformations10.1016/j.tca.2015.09.016 ↗
6. Short-chain modified SiO2 with high absorption of organic PCM for thermal protection10.3390/nano9040657 ↗
7. Inorganic salt hydrate for thermal energy storage10.3390/app7121317 ↗
8. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
9. Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material10.1016/j.rser.2006.11.002 ↗
10. A review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
11. Development of salt hydrate eutectics as latent heat storage for air conditioning and cooling10.1016/j.tca.2013.11.011 ↗
12. Solidification behavior and thermal conductivity of bulk sodium acetate trihydrate composites with thickening agents and graphite10.1016/j.solmat.2015.10.038 ↗
13. Experimental investigations on prototype heat storage units utilizing stable supercooling of sodium acetate trihydrate mixtures10.1016/j.apenergy.2016.02.038 ↗
14. Effect of an alpha-phase nucleating agent on the crystallization kinetics of a propylene/ethylene random copolymer at largely different supercooling10.1016/j.jcrysgro.2014.09.028 ↗
15. Supercooling suppression of microencapsulated phase change materials by optimizing shell composition and structure10.1016/j.apenergy.2013.08.048 ↗
16. Effective dispersion of multi-wall carbon nano-tubes in hexadecane through physiochemical modification and decrease of supercooling10.1016/j.solmat.2011.09.032 ↗
17. Effect of fumed silica additive on supercooling, thermal reliability and thermal stability of Na2HPO4·12H2O as inorganic PCM10.1016/j.tca.2019.02.013 ↗
18. Thermal and physical characterization of PEG phase change materials enhanced by carbon-based nanoparticles10.3390/nano10061168 ↗
19. Experimental and numerical investigations on the thermal performance of building plane containing CaCl2· 6H2O/expanded graphite composite phase change material10.1016/j.apenergy.2017.02.049 ↗
20. CaCl2· 6H2O/Expanded graphite composite as form-stable phase change materials for thermal energy storage10.1007/s10973-013-3311-0 ↗
21. Experimental investigations of Alum/expanded graphite composite phase change material for thermal energy storage and its compatibility with metals10.1016/j.energy.2018.07.075 ↗
22. Developing NaAc∙ 3H2O-based composite phase change material using glycine as temperature regulator and expanded graphite as supporting material for use in floor radiant heating10.1016/j.molliq.2020.113932 ↗
23. Nano-hybridized form-stable ester@ F-SiO2 phase change materials for melt-spun PA6 fibers engineered towards smart thermal management fabrics10.1016/j.cej.2020.126369 ↗
24. Drzal · 2013
25. Crystallization in pores10.1016/S0008-8846(99)00002-2 ↗
26. Crystal growth in porous materials—I: the crystallization pressure of large crystals10.1016/j.jcrysgro.2005.05.007 ↗