An improved technique for molten salt corrosion sample preparation
Source abstract
Abstract
Abstract Proper materialographic sample preparation is vital in electron microscopy to produce the best quality material results, nearest to its true structure. Environments and media such as molten salts render traditional methods inadequate for analysis. An evaluation of conventional preparation techniques with different lubricants on 316 L stainless steel from its interaction with 59.4/40.6 wt% Na2CO3/NaCl eutectic salt show how corrosion layer information is lost or retained. Additional large-scale composite electron imaging and compound analysis work on the corrosion effects of 68.05/31.95 wt% Na2SO4/NaCl was also investigated on C-276 nickel superalloy. The new adaptation of sample preparation using kerosene as a lubricant is the best available option for compound analysis of molten salt corrosion, allowing corrosion mechanisms to be more well understood. The method also provided a sample surface that allows phase mapping and compound identification to a higher degree of accuracy than previously seen in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Technical challenges and opportunities for concentrating solar power with thermal energy storage10.1115/1.4024143 ↗
2. Australian Renewable Energy Agency. Australian Solar Thermal Research Institute; Available from: https://www.astri.org.au/.
3. Sunshot Initiative Office of Energy Efficiency & Renewable Energy, Forrestal Building, 1000 Independence Avenue, SW, Washington, DC 2058: U.S. Department of Energy; Available from: http://energy.gov/eere/sunshot/sunshot-initiative.
4. Mehos · 2017 · 144
5. Gomez · 2011
6. Ong · 2019 · 3 · 1800131
7. Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)10.1016/j.solmat.2017.12.034 ↗
8. Eutectic Na2CO3–NaCl salt: a new phase change material for high temperature thermal storage10.1016/j.solmat.2016.04.002 ↗
9. Experimental verification of theoretically estimated composition and enthalpy of fusion of eutectic salt mixtures10.1016/j.solmat.2017.09.033 ↗
10. Ahmed · 2009
11. High temperature corrosion studies on friction welded low alloy steel and stainless steel in air and molten salt environment at 650 °C10.1016/j.matdes.2011.08.034 ↗
12. Corrosion behavior of 316SS and Ni-based alloys in a ternary NaCl-KCl-MgCl2 molten salt10.1016/j.solener.2018.06.094 ↗
13. Corrosion behaviors of 316 stainless steel and Inconel 625 alloy in chloride molten salts for solar energy storage10.1515/htmp-2020-0077 ↗
14. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
15. Effects of temperature and partial pressure of CO2/O2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt10.1016/S0378-7753(00)00376-1 ↗
16. Corrosion of Fe alloys in NaNO3-KNO3-NaNO2 at 823 K10.1007/BF02833362 ↗
17. Coyle · 1986
18. Fluoride salts and container materials for thermal energy storage applications in the temperature range 973-1400 K
19. Corrosion behaviours of iron-chromium-aluminium steel near the melting point of various eutectic salts10.1016/j.solmat.2020.110510 ↗
20. High temperature corrosion beneath carbonate melts of aluminide coatings for CSP application10.1016/j.solmat.2020.110514 ↗
21. Corrosion in molten Na2CO3-K2CO3 at 800° C—I. Effect of oxygen partial pressure on iron corrosion10.1016/0010-938X(84)90114-8 ↗
22. Electrochemical oxidation of molten carbonate‐coal slurries10.1149/1.2100334 ↗
23. Identification of salt—alloy combinations for thermal energy storage applications in advanced solar dynamic power systems10.1007/BF02834148 ↗
24. Salt hydrates used for latent heat storage: corrosion of metals and reliability of thermal performance10.1016/0038-092X(88)90136-3 ↗
25. Use of pure nickel and LiOH for thermal energy storage10.1007/BF02834153 ↗
26. Excellent corrosion resistance of 316 stainless steel in purified NaCl-MgCl2 eutectic salt at high temperature10.1016/j.corsci.2020.108473 ↗
27. The effect of laser surface melting of stainless steel grade AISI 316L welded joint on its corrosion performance in molten Solar Salt10.1016/j.solmat.2020.110576 ↗
28. A microstructural study of the influence of NaCl vapor on the oxidation of a Ni-Cr-Al alloy at 850°C10.1007/BF00609972 ↗
29. Post-test corrosion analysis of high-temperature thermal energy storage capsules10.1007/BF02649685 ↗
30. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
31. Damage analysis of 601 nickel superalloy in eutectic Na2CO3/NaCl molten salt under isothermal and thermal cycling conditions10.1016/j.solener.2019.09.030 ↗
32. Corrosion testing under inert atmosphere with stainless steel crucibles
33. Weidmann · 2019
34. Bjerregaard · 2002
35. Kruizenga · 2012
36. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗