journal article·2021-03

Impact of loading topology and current mismatch on current–voltage curves of three-terminal tandem solar cells with interdigitated back contacts

Takeshi Tayagaki, Kikuo Makita, Tomihisa Tachibana, Hidenori Mizuno, Ryuji Oshima, Hidetaka Takato, Takeyoshi Sugaya

Publisher page

Abstract

Abstract The electrical output characteristics of a three-terminal tandem solar cell with top and interdigitated back contacts were experimentally investigated under different external loading and current mismatch conditions. Regardless of the chosen loading topology (i.e., which terminal is common), the output power for the two sub-circuits of the three-terminal tandem added up to the same value. However, the current–voltage curve of one sub-circuit depended on the loading topology and biasing condition of the other sub-circuit, which can be explained by a simple equivalent circuit model. A negative current was observed for two topologies depending on the current mismatch between the top and bottom cells, which suggests power injection into one of the sub-circuits. This negative current did not appear for a third topology. These results indicate that the third topology is a useful way to maximise the power, especially under spectrum-varying conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Semiconductor materials and interfaces · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Quadruple-junction inverted metamorphic concentrator devices10.1109/JPHOTOV.2014.2364132 ↗
2. Four-junction wafer-bonded concentrator solar cells10.1109/JPHOTOV.2015.2501729 ↗
3. Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
4. Techno-economic viability of silicon-based tandem photovoltaic modules in the United States10.1038/s41560-018-0201-5 ↗
5. Electric vehicles and the electric grid: a review of modeling approaches, Impacts, and renewable energy integration10.1016/j.rser.2012.11.042 ↗
6. Static concentrator photovoltaics for automotive applications10.1016/j.solener.2017.03.028 ↗
7. Overview of Si tandem solar cells and approaches to PV-powered vehicle applications10.1557/adv.2020.66 ↗
8. Optically enhanced photon recycling in mechanically stacked multijunction solar cells10.1109/JPHOTOV.2015.2494690 ↗
9. Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions10.1038/nenergy.2017.144 ↗
10. The realistic energy yield potential of GaAs-on-Si tandem solar cells: a theoretical case study10.1364/OE.23.00A382 ↗
11. Economic viability of thin-film tandem solar modules in the United States10.1038/s41560-018-0126-z ↗
12. Theoretical analysis of new wavelength-division solar cells10.1063/1.328382 ↗
13. Three-terminal double junction GaAs/GaAlAs cascade solar cell10.1109/EDL.1983.25662 ↗
14. High-efficiency monolithic three-terminal GaAs/Si tandem solar cells fabricated by metalorganic chemical vapor deposition10.1143/JJAP.35.1401 ↗
15. Double-junction three-terminal photovoltaic devices: a modeling approach10.1063/1.2786614 ↗
16. A monolithic three-terminal GaInAsP/GaInAs tandem solar cell10.1002/pip.913 ↗
17. Design of dual-junction three-terminal CdTe/InGaAs solar cells10.1007/s11664-014-3346-4 ↗
18. Nanoscale back contact perovskite solar cell design for improved tandem efficiency10.1021/acs.nanolett.7b01092 ↗
19. Equivalent performance in three-terminal and four-terminal tandem solar cells10.1109/JPHOTOV.2018.2865175 ↗
20. Maximizing tandem solar cell power extraction using a three-terminal design10.1039/C8SE00133B ↗
21. String-level modeling of two, three, and four terminal Si-based tandem modules10.1109/JPHOTOV.2018.2855104 ↗
22. Analysis of luminescence coupling effect in three-terminal tandem solar cells
23. Bandgap engineered smart three-terminal solar cell: new perspectives towards very high efficiencies in the silicon world10.1002/pip.3096 ↗
24. Nagashima · 2000 · 1193
25. Back-contacted bottom cells with three terminals: maximizing power extraction from current-mismatched tandem cells10.1002/pip.3107 ↗
26. III-V/Si wafer bonding using transparent, conductive oxide interlayers10.1063/1.4923444 ↗
27. Electrical and optical interconnection for mechanically stacked multi-junction solar cells mediated by metal nanoparticle arrays10.1063/1.4766339 ↗
28. Palladium nanoparticle array-mediated semiconductor bonding that enables high-efficiency multi-junction solar cells10.7567/JJAP.55.025001 ↗
29. High-efficiency III–V//Si tandem solar cells enabled by the Pd nanoparticle array-mediated ‘smart stack’ approach10.7567/APEX.10.072301 ↗
30. Dual-junction GaAs solar cells and their application to smart stacked III–V//Si multijunction solar cells10.7567/APEX.11.052301 ↗
31. Three-terminal III-V/Si tandem solar cells enabled by a transparent conductive adhesive, sustain
32. Three-terminal tandem solar cells with a back-contact-type bottom cell bonded using conductive metal nanoparticle arrays10.1109/JPHOTOV.2019.2957661 ↗
33. Three-terminal heterojunction bipolar transistor solar cell for high-efficiency photovoltaic conversion10.1038/ncomms7902 ↗
34. Operation of the three terminal heterojunction bipolar transistor solar cell
35. Considerations for the design of a heterojunction bipolar transistor solar cell10.1109/JPHOTOV.2019.2945914 ↗
36. 23.6%-Efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
37. Optimization of three-terminal perovskite/silicon tandem solar cells10.1109/JPHOTOV.2018.2888832 ↗
38. Three-terminal perovskite/silicon tandem solar cells with top and interdigitated rear contacts10.1021/acsaem.9b01800 ↗
39. A taxonomy for three-terminal tandem solar cells10.1021/acsenergylett.0c00068 ↗
40. Bifacial interdigitated-back-contact (IBC) crystalline silicon solar cell: fabrication and evaluation by internal quantum efficiency mapping
41. Investigation of the properties of semiconductor wafer bonding in multijunction solar cells via metal-nanoparticle arrays10.1063/1.4992805 ↗
42. Impact of nanometer air gaps on photon recycling in mechanically stacked multi-junction solar cells10.1364/OE.27.0000A1 ↗
43. Moving photovoltaic installations: impacts of the sampling rate on maximum power point tracking algorithms10.1109/TIM.2019.2901979 ↗
44. Comparison of photovoltaic array maximum power point tracking techniques10.1109/TEC.2006.874230 ↗