Corrosion behaviours of iron-chromium-aluminium steel near the melting point of various eutectic salts
Source abstract
Abstract
Abstract The corrosion behaviours of Fe-Cr-Al alloy in four types of molten eutectic salts-chlorinated salt, carbonate salt, mixture of carbonate salt and MgO and nitrate salt-have been investigated in this paper. The experimental temperatures were chosen to be near the melting points of various eutectic salts and the longest holding time was sustained to 30 days in the isothermal experiments. The microstructures of the samples before and after corrosion tests were detected by X-ray diffraction and scanning electron microscope techniques. The research indicates, among the three eutectic salts, the corrosion of Fe-Cr-Al alloys in the molten chlorinated eutectic salt is the strongest with the thickness of corrosion scales between 40 and 180 μm. The corrosion in molten carbonate eutectic salt is relatively moderate, and the corrosive thickness is between 2 and 8 μm. For the molten nitrate eutectic salt, no obvious corrosion with special morphology was observed. The corrosion strength of the four eutectic salts should be in the order of chlorine eutectic salt > (carbonate eutectic salt + MgO) > carbonate eutectic salt > nitrate eutectic salt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Metallurgical Processes and Thermodynamics · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. High temperature corrosion behavior of iron aluminides containing ternary additions in H2/H2S/H2O mixed gases
2. Gaseous corrosion resistance of Fe–Al-based alloys containing Cr additions: Part I: kinetic results10.1016/j.msea.2005.05.053 ↗
3. Al-containing ODS steels with improved corrosion resistance to liquid lead–bismuth10.1016/j.jnucmat.2011.06.046 ↗
4. Comparative study on the corrosion resistance of Al–Cr–Fe alloy containing quasicrystals and pure Al10.1016/j.jmst.2016.07.005 ↗
5. Stability domain of alumina thermally grown on FeCrAl-based model alloys and modified surface layers exposed to oxygen-containing molten Pb10.1016/j.jnucmat.2015.12.009 ↗
6. Transmission electron microscopy (TEM) study of the oxide layers formed on Fe-12Cr-4Al ferritic alloy in an oxygenated Pb-Bi environment at 800°C10.1007/s11837-018-2951-8 ↗
7. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies10.1016/j.solmat.2016.05.052 ↗
8. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: pre-oxidation treatment and isothermal corrosion tests10.1016/j.solmat.2017.02.019 ↗
9. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
10. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700°C and Li2CO3+ K2CO3+ Na 2CO3 at 450°C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
11. Stress assisted oxidative failure of Inconel 601 for thermal energy storage10.1016/j.solmat.2016.10.008 ↗
12. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗
13. Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants10.1016/j.solmat.2018.12.028 ↗
14. Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants10.1016/j.renene.2019.03.087 ↗
15. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials10.1016/j.energy.2018.09.128 ↗
16. MgO based composite phase change materials for thermal energy storage: the effects of MgO particle density and size on microstructural characteristics as well as thermophysical and mechanical properties10.1016/j.apenergy.2019.04.094 ↗
17. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
18. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
19. Corrosion resistance of Cr/Ni alloy to a molten carbonate salt at various temperatures for the next generation high-temperature CSP plants10.1016/j.solener.2018.06.091 ↗
20. Corrosion resistance and microstructural stability of austenitic Fe–Cr–Al–Ni model alloys exposed to oxygen-containing molten lead10.1016/j.jnucmat.2019.06.043 ↗
21. Internal oxidation and phase transformations of multi-phase Fe–Ni–Al and Fe–Ni–Al–Cr alloys induced by KCl corrosion10.1016/j.corsci.2011.02.034 ↗
22. High temperature oxidation of Fe–Al and Fe–Cr–Al alloys: the role of Cr as a chemically active element10.1016/j.corsci.2010.06.019 ↗
23. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
24. Kenisarin, High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗