journal article·2018-08

Influence of Cu on Ga diffusion during post-selenizing the electrodeposited Cu/In/Ga metallic precursor process

Jinlian Bi, Qing Gao, Jianping Ao, Zhaojing Zhang, Guozhong Sun, Yi Zhang, Wei Liu, Fangfang Liu, Yun Sun, Dong Xiang

Publisher page

Abstract

Abstract Gallium accumulation, caused by faster reaction of indium with Se than gallium with Se, is a critical issue for post-selenization process, which limits the optimization of surface energy bandgap and open circuit voltage of CIGSe thin film solar cell. In this study, large-grained and compact CIGSe thin film was successful fabricated by electrodeposition and a three-step vapor Se/N2/vapor Se reaction process. The influence of the Cu content on gallium diffusion and grain growth of CIGSe thin film was studied. The compositions, element distributions, and morphologies of CIGSe thin films were studied. The results revealed that the gallium diffused homogenizely through the film with Cu/(In+Ga) 0.9. Single phase and large-grained CIGSe thin films were obtained with Cu/(In+Ga) ratios between 0.78 and 0.9. Cu(In,Ga)Se2 solar cells made with the CIGSe thin films presented highest efficiency of 11.22%. The solar cell based on the single phase and large-grained CIGSe absorber with Cu/(In+Ga) = 0.85 presents highest conversion efficiency of 11.22%, fill factor of 63.83% and VOC of 514 mV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Solar Frontier hits 22.3% on CIGS cell, Solar Frontier press release, 2015. [online]. Available: 〈http://www.solar-frontier.com/eng/news/2015/C051171.html〉.
3. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
4. C. Broussillou , C. Viscogliosi , A. Rogee , S. Angle , P.P. Grand , S. Bodnar , C. Debauche , J.L. Allary , B. Bertrand , C. Guillou , Statistical process control for Cu(In,Ga)(S,Se)2 electrodeposition-based manufacturing process of 60 × 120 cm2 modules up to 14.0% efficiency, in: Proceedings of the 42th IEEE Photovoltaic Specialists Conference (PVSC), 2015, pp. 1–5. http://dx.doi.org/10.1109/PVSC.2015.7356224.10.1109/PVSC.2015.7356224 ↗
5. Investigation of Cu(In,Ga)Se2 polycrystalline growth: Ga diffusion and surface morphology evolution10.1016/j.materresbull.2013.08.073 ↗
6. Real-time study of Ga diffusion processes during the formation of Cu(In,Ga)Se2: the role of Cu and Na content10.1016/j.solmat.2013.04.008 ↗
7. Time-resolved investigation of Cu(In, Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors10.1002/pip.2531 ↗
8. Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2485 ↗
9. K. Woo Kyoung, G.M. Hanket, W.N. Shafarman, Ga distribution and adhesion issues in selenization of metallic Cu-Ga-In precursors, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference (PVSC), 2009, pp. 000844–000847.10.1109/PVSC.2009.5411155 ↗
10. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu (In, Ga)(Se, S)2 thin films10.1063/1.4704390 ↗
11. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films10.1063/1.366122 ↗
12. Incongruent reaction of Cu(InGa) intermetallic precursors in H2Se and H2S10.1063/1.2787151 ↗
13. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
14. Band gap engineering in polycrystalline Cu(In,Ga)(Se,S)2 chalcopyrite thin films10.1016/j.mseb.2003.10.109 ↗
15. Gallium diffusion and diffusivity in CuInSe2 epitaxial layers10.1063/1.117820 ↗
16. Cu deficiency in multi-stage co-evaporated Cu(In,Ga)Se2 for solar cells applications: microstructure and Ga in-depth alloying10.1016/j.actamat.2010.02.021 ↗
17. Impact of Cu-rich growth on the CuIn1−xGaxSe2 surface morphology and related solar cells behaviour10.1016/j.solmat.2009.08.004 ↗
18. Controllable growth of Ga Film electrodeposited from aqueous solution and Cu(In,Ga)Se2 solar cells10.1021/acsami.7b01388 ↗
19. Three-step vapor Se/N2/vapor Se reaction of electrodeposited Cu/In/Ga precursor for preparing CuInGaSe2 thin films10.1016/j.solmat.2016.09.026 ↗
20. Pulse electro-deposition of copper on molybdenum for Cu(In,Ga)Se2 and Cu2ZnSnSe4 solar cell applications10.1016/j.jpowsour.2016.07.005 ↗
21. Formation mechanisms of Cu(In,Ga)Se2 solar cells prepared from electrodeposited precursors10.1016/j.tsf.2012.11.106 ↗
22. Recrystallization of Cu(In,Ga)Se2 thin films studied by X-ray diffraction10.1016/j.actamat.2013.04.006 ↗
23. Effect of Se flux on CuIn1-xGaxSe2 film in reactive sputtering process10.1002/pip.2357 ↗
24. New insights into the Mo/Cu(In,Ga)Se2 interface in thin film solar cells: formation and properties of the MoSe2 interfacial layer10.1063/1.4964677 ↗
25. Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2012.02.015 ↗
26. Effect of Ga incorporation on valence band splitting of OVC CuIn3Se5 thin films10.1016/j.jpcs.2011.01.011 ↗
27. Raman scattering analysis of electrodeposited Cu(In,Ga)Se2 solar cells: impact of ordered vacancy compounds on cell efficiency10.1063/1.4890970 ↗
28. Raman scattering analysis of Cu-poor Cu(In,Ga)Se2 cells fabricated on polyimide substrates: effect of Na content on microstructure and phase structure10.1016/j.tsf.2010.12.177 ↗
29. Raman investigations of Cu (In, Ga) Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
30. Characterization of Cu(In,Ga)Se2 films by Raman scattering10.1016/S0254-0584(01)00345-5 ↗
31. Raman and XPS studies of CIGS/Mo interfaces under various annealing temperatures10.1016/j.matlet.2014.08.087 ↗
32. Process monitoring of chalcopyrite photovoltaic technologies by Raman spectroscopy: an application to low cost electrodeposition based processes10.1039/C0NJ00794C ↗
33. Raman spectroscopy of CuIn1-xGaxSe2 for in-situ monitoring of the composition ratio10.1016/j.tsf.2011.02.058 ↗
34. Transport properties of CuInSe210.1016/0379-6787(86)90091-8 ↗
35. The electronic structure of chalcopyrites-bands, point defects and grain boundaries10.1002/pip.936 ↗
36. Electrical properties of CuGaSe2 single crystals10.1016/0038-1098(79)90121-2 ↗
37. Intrinsic point defects in CuInSe2 and CuGaSe2 as seen via screened-exchange hybrid density functional theory10.1103/PhysRevB.87.245203 ↗
38. Phase diagram of the CulnSe2-CuGaSe2 pseudobinary system studied by combined ab initio density functional theory and thermodynamic calculation10.1063/1.4891829 ↗
39. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
40. Advanced characterization of electrodeposition-based high efficiency solar cells: non-destructive Raman scattering quantitative assessment of the anion chemical composition in Cu(In,Ga)(S,Se)2 absorbers10.1016/j.solmat.2015.06.056 ↗
41. Defect engineering in multinary earth-abundant chalcogenide photovoltaic materials10.1002/aenm.201602366 ↗
42. Elemental redistributions at structural defects in Cu(In,Ga)Se2 thin films for solar cells