journal article·2016-12Open access

Development of Cu(In,Ga)Se2 superstrate devices with alternative buffer layers

Peipei Xin, Jes K. Larsen, Fei Deng, William N. Shafarman

Abstract

Abstract Superstrate Cu(In,Ga)Se2 (CIGS) solar cells are prepared in the structure SLG/TCO/buffer/CIGS/Au with CIGS deposited onto the buffer layer by a single stage co-evaporation process. Three buffer materials – CdS deposited by chemical surface deposition, ZnSe and ZnO by RF magnetron sputtering – are tested in the superstrate structure. The best cell achieves 8.6% efficiency with the ZnO buffer after light soaking and forward bias treatments. The efficiency of devices with CdS or ZnSe buffers are less than 4%. The junction formation between the absorber and buffer layers are investigated by x-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. For CdS/CIGS and ZnSe/CIGS superstrate devices extensive inter-diffusion between the absorber and buffer layer under CIGS growth condition is the critical problem. For ZnO/CIGS superstrate cells GaxOy formation at the junction interface and unfavorable conduction band alignment are the main factors that limit the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. Luque · 2011
3. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
4. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
5. Cu(In,Ga)Se2-based thin-film photovoltaic modules optimized for long-term performance10.1016/S0927-0248(02)00101-0 ↗
6. Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts10.1016/j.solener.2004.08.010 ↗
7. Interface study of CuInSe2/ZnO and Cu(In,Ga)Se2/ZnO devices using ALD ZnO buffer layers10.1016/S0040-6090(03)00229-3 ↗
8. Polycrystalline Cu(InGa)Se2 thin-film solar cells with ZnSe buffer layers10.1143/JJAP.34.5949 ↗
9. T. Yoshida, R.W. Birkmire, Fabrication of CuInSe2 solar cells in a superstrate configuration, in: Proceedings of the 11th EC Photovoltaic Solar Energy Conference, 1992, p. 811.
10. T. Nakada, N. Okano, Y. Tanaka, H. Fukuda, A. Kunioka, Superstrate-type CuInSe2 solar cells with chemically deposited CdS window layers, in: Photovoltaic Energy Conversion, 1994., Conference Record of the Twenty Fourth. IEEE Photovoltaic Specialists Conference-1994, 1994 IEEE First World Conference, IEEE, 1994, pp. 95–98.10.1109/WCPEC.1994.519816 ↗
11. T. Nakada, T. Mise, High-efficiency superstrate type CIGS thin film solar cells with graded bandgap absorber layers, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, 2001, pp. 1027–1030.
12. Comparison of structural and electrical properties of Cu(In,Ga)Se2 for substrate and superstrate solar cells10.1016/S0040-6090(01)01508-5 ↗
13. J.K. Larsen, P. Xin, W.N. Shafarman, Formation of Ga2O3 barrier layer in Cu(InGa)Se2 superstrate devices with ZnO buffer layer, in: MRS Proceedings, Cambridge University Press, 2013, pp. 67–72.10.1557/opl.2013.1007 ↗
14. Cu(In,Ga)Se2 superstrate solar cells: prospects and limitations
15. Light soaking effects in Cu(In,Ga)Se2 superstrate solar cells10.1016/S0040-6090(03)00187-1 ↗
16. Metastable electrical transport in Cu(In,Ga)Se2 thin films and ZnO/CdS/Cu(In,Ga) Se2 heterostructures10.1016/S0375-9601(98)00401-0 ↗
17. Time-dependent open-circuit voltage in CuInSe2/Cds solar cells: theory and experiment10.1063/1.338377 ↗
18. The importance of sodium control in CIGSe superstrate solar cells10.1109/JPHOTOV.2014.2360332 ↗
19. High-efficiency Cd-free CIGSS thin-film solar cells with solution grown zinc compound buffer layers10.1016/S0927-0248(00)00260-9 ↗
20. MOCVD as a dry deposition method of ZnSe buffers for Cu(In,Ga)(S,Se)2 solar cells10.1002/pip.539 ↗
21. Processing options for CdTe thin film solar cells10.1016/j.solener.2004.04.012 ↗
22. B.E. McCandless, W.N. Shafarman, Chemical surface deposition of ultra-thin cadmium sulfide films for high performance and high cadmium utilization, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, Vols a-C, 2003, pp. 562–565.
23. B.E. McCandless, R.W. Birkmire, Influence of window and absorber layer processing on device operation in superstrate thin film CdTe solar cells, in: Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference, 2000, pp. 491–494.10.1109/PVSC.2000.915879 ↗
24. B.E. McCandless, R.W. Birkmire, CdTe1-xSx absorber layers for thin-film CdTe/CdS solar cells, in: Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997, 1997, pp. 307–312.10.1109/PVSC.1997.654090 ↗
25. ILGAR In2S3 buffer layers for Cd-free Cu(In,Ga)(S,Se)2 solar cells with certified efficiencies above 16%10.1002/pip.2268 ↗
26. Enhancements in specimen preparation of Cu(In,Ga)(S,Se)2 thin films10.1016/j.micron.2011.11.004 ↗
27. Wagner · 1979
28. Scheer · 2011
29. Band offsets of high K gate oxides on III–V semiconductors10.1063/1.2213170 ↗
30. Cu(In,Ga)Se2 solar cells with controlled conduction band offset of window/Cu(In,Ga)Se2 layers10.1063/1.1366655 ↗
31. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
32. Oxygen deficiency and Sn doping of amorphous Ga2O310.1063/1.4938473 ↗
33. Backwall superstrate configuration for ultrathin Cu(In,Ga)Se2 solar cells10.1063/1.4862651 ↗