journal article·2016-12

Microcrystalline bottom cells in large area thin film silicon MICROMORPH™ solar modules

J.E. Hoetzel, O. Caglar, J.S. Cashmore, C. Goury, J. Kalas, M. Klindworth, M. Kupich, G.-F. Leu, M.-H. Lindic, P.A. Losio, T. Mates, B. Mereu, T. Roschek, I. Sinicco

Publisher page

Abstract

Abstract The influence of working pressure and inter-electrode gap distance on the quality of microcrystalline silicon prepared by PECVD at 40 MHz in three different KAI™ reactors designs with inter-electrode gaps of 28 mm, 16 mm and 7 mm has been investigated. The microcrystalline devices were implemented and studied as bottom cells in MICROMORPH™ tandem modules or processed with an optical filter to simulate the absorption of a top cell on a module size of 1.43 m 2 . Increasing the working pressure from 250 Pa to 2000 Pa resulted in an improvement of the efficiency of 1% absolute due to improvement in the open circuit voltage V oc and the fill factor FF . The influence of the deposition rate on the quality of the intrinsic absorber layers has been investigated and optimized. An unconventional crystallinity profile throughout the intrinsic absorber layer has been developed to further improve either the current density J sc or V oc and FF . By controlling and tuning the Raman crystallinity a very high open circuit voltage V oc of >1.42 V in a tandem cell design in full size modules (1.43 m 2 ) could be realized.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Shah · 2010
2. J. Meier, S. Dubail, R. Fluckiger, D. Fischer, H. Keppner, A. Shah, Intrinsic microcrystalline silicon (μc-Si:H)-a promising new thin film solar cell material, in: IEEE, 1994, pp. 409–412, doi:10.1109/WCPEC.1994.519985.10.1109/WCPEC.1994.519985 ↗
3. Record 12.34% stabilized conversion efficiency in a large area thin-film silicon tandem (MICROMORPH™) module10.1002/pip.2642 ↗
4. Improved conversion efficiencies of thin-film silicon tandem (MICROMORPH™) photovoltaic modules10.1016/j.solmat.2015.08.022 ↗
5. Light management in large area thin-film silicon solar modules10.1016/j.solmat.2015.07.018 ↗
6. Window p-layer in amorphous pin solar cells using ZnO as transparent conductive oxide10.1016/j.solmat.2016.03.036 ↗
7. Record amorphous silicon single-junction photovoltaic module with 9.1% stabilized conversion efficiency on 1.43m2: record amorphous silicon single-junction photovoltaic module10.1002/pip.2760 ↗
8. 11.0% efficient thin-film microcrystalline silicon solar cells with honeycomb textured substrates10.1109/JPHOTOV.2014.2355037 ↗
9. High-efficiency microcrystalline silicon solar cells on honeycomb textured substrates grown with high-rate VHF plasma-enhanced chemical vapor deposition10.7567/JJAP.54.08KB05 ↗
10. High-efficiency microcrystalline silicon single-junction solar cells10.1002/pip.2398 ↗
11. M.N. van den Donker, Plasma deposition of microcrystalline silicon solar cells: looking beyond the Glass, Dissertation TU Eindhoven, Jülich, 2006, ISBN: 3-89336-456-0. 〈http://hdl.handle.net/2128/2507〉 (accessed 28.08.15).
12. Intrinsic microcrystalline silicon: a new material for photovoltaics10.1016/S0927-0248(99)00140-3 ↗
13. Deposition of microcrystalline silicon prepared by hot-wire chemical-vapor deposition: the influence of the deposition parameters on the material properties and solar cell performance10.1063/1.1957128 ↗
14. Hidden parameters in the plasma deposition of microcrystalline silicon solar cells10.1557/jmr.2007.0226 ↗
15. Plasma enhanced chemical vapor deposition process optimization for thin film silicon tandem junction solar cells10.1016/j.tsf.2014.03.008 ↗
16. High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime10.1063/1.2961334 ↗
17. H. Keppner, U. Kroll, P. Torres, J. Meier, D. Fischer, M. Goetz, R. Tscharner, A. Shah, Scope of VHF plasma deposition for thin-film silicon solar cells, in: Proceedings of the Conference Record of the Twenty Fifth IEEE Photovoltaic Specialist Conference, 1996, pp. 669–672, doi:10.1109/PVSC.1996.564217.10.1109/PVSC.1996.564217 ↗
18. Microcrystalline silicon. Growth and device application10.1016/j.jnoncrysol.2004.02.012 ↗
19. Roschek · 2015
20. High rate growth of microcrystalline silicon at low temperatures10.1016/S0022-3093(99)00744-9 ↗
21. Relation between substrate surface morphology and microcrystalline silicon solar cell performance10.1016/j.jnoncrysol.2007.09.084 ↗
22. High rate deposition of microcrystalline silicon using conventional plasma-enhanced chemical vapor deposition10.1143/JJAP.37.L1116 ↗
23. Device-grade amorphous silicon prepared by high-pressure plasma10.1143/JJAP.41.1947 ↗
24. High-deposition-rate of microcrystalline silicon solar cell by using VHF PECVD10.1016/j.tsf.2005.08.026 ↗
25. D. Chaudhary, A. Sublet, C. Goury, S. Jost, J. Hoetzel, M. Klindworth, E. Kügler, A. Salabas, High pressure regime for high performance MicromorphTM modules: process and hardware development, in: Konferenzpaper, 2012, pp. 2094–2097, doi:10.4229/27thEUPVSEC2012-3AO.4.1.
26. Guiding principles for obtaining stabilized amorphous silicon at larger growth rates10.1016/S0022-3093(99)00743-7 ↗
27. High pressure regime of plasma enhanced deposition of microcrystalline silicon10.1063/1.1866477 ↗
28. Critical evaluation of conditions of plasma polymerization10.1002/pol.1978.170160403 ↗
29. Lieberman · 2005
30. Relationship between Raman crystallinity and open-circuit voltage in microcrystalline silicon solar cells10.1016/j.solmat.2003.07.004 ↗
31. ImageJ: 25 years of image analysis
32. Zuiderveld · 1994 · 474
33. G. Bugnon, A. Feltrin, F. Sculati-Meillaud, J. Bailat, C. Ballif, Influence of ion bombardment on microcrystalline silicon material quality and solar cell performances, in: Proceedings of the 33rd IEEE Photovoltaic Specialist Conference, PVSC 08, 2008, pp. 1–4, doi:10.1109/PVSC.2008.4922613.10.1109/PVSC.2008.4922613 ↗
34. Microcrystalline silicon solar cells: effect of substrate temperature on cracks and their role in post-oxidation10.1002/pip.956 ↗
35. Nanocrystalline zinc oxide for surface morphology control in thin-film silicon solar cells10.1016/j.solmat.2015.08.026 ↗
36. On the interplay between microstructure and interfaces in high-efficiency microcrystalline silicon solar cells10.1109/JPHOTOV.2012.2214766 ↗
37. Thin-film silicon tandem (MICROMORPH™) module design and key reliability topics10.1016/j.solmat.2016.03.029 ↗
38. Real-time spectroscopic ellipsometry studies of the nucleation and grain growth processes in microcrystalline silicon thin films10.1103/PhysRevB.63.115306 ↗
39. Influence of substrate on the microstructure of microcrystalline silicon layers and cells10.1016/S0022-3093(01)01142-5 ↗
40. Model of electronic transport in microcrystalline silicon and its use for prediction of device performance10.1016/j.jnoncrysol.2004.02.063 ↗