journal article·2015-12

Physical properties of Cu(In,Ga)Se2 film on flexible stainless steel substrate for solar cell application: A multi-layer precursor method

Jakapan Chantana, Daisuke Hironiwa, Taichi Watanabe, Seiki Teraji, Takashi Minemoto

Publisher page

Abstract

Abstract The process named “multi-layer precursor method”, consisting of Ga–Se/In–Se/Cu–Se stacked precursors, is proposed to prepare Cu(In,Ga)Se2 (CIGS) films on flexible stainless steel (SUS) substrates. In this work, precursor deposition temperature (TPRE), varying from about 250 to 430 °C, is first scrutinized. From Raman scattering measurement, it is suggested that the increase in the TPRE enhances Cu2−xSe secondary phase during film deposition, thus enlarging CIGS grain size, while decreases ordered vacancy compound (OVC) near surface of the finished film, caused by desorption of In2Se during the precursor deposition. Suitable TPRE is in a range of approximately 370–400 °C, resulting in long carrier lifetime. Next, according to the examinations of material compositions of CIGS absorbers, the optimized [Cu]/([In]+[Ga]) contributes to the absorbers with large grain size due to the help of Cu2−xSe phase during film deposition and OVC near their surfaces for pn homo-junction. The appropriate [Ga]/([In]+[Ga]) leads to optimized band-gap energy with high CIGS quality implied by long carrier lifetime. Ultimately, the effective [Cu]/([In]+[Ga]) and [Ga]/([In]+[Ga]) ratios for the flexible CIGS solar cell with high conversion efficiency under the so-called “multi-layer precursor method” are in ranges of about 0.74–0.84 and 0.28–0.35, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Kodigala · 2014
2. Energy payback time and carbon footprint of commercial photovoltaic system10.1016/j.solmat.2013.08.037 ↗
3. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
4. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
5. Solar cell efficiency tables (version 44)10.1002/pip.2525 ↗
6. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
7. Electronic properties of Cu(In,Ga)Se2 solar cells on stainless steel foil without diffusion barrier10.1002/pip.1247 ↗
8. Multi layer precursor method for Cu(In,Ga)Se2 solar cells fabricated on flexible substrates10.7567/JJAP.53.05FW03 ↗
9. Impact of Ga/(In+Ga) profile in Cu(In,Ga)Se2 prepared by multi-layer precursor method on its cell performance10.1016/j.tsf.2014.01.009 ↗
10. Investigation of Cu(In,Ga)Se2 absorber by time-resolved photoluminescence for improvement of its photovoltaic performance10.1016/j.solmat.2014.08.012 ↗
11. Controlled back slope of Ga/(In+Ga) profile in Cu(In,Ga)Se2 absorber fabricated by multi layer precursor method for improvement of its photovoltaic performance10.1016/j.solmat.2014.11.023 ↗
12. J. Chantana, M. Murata, T. Higuchi, T. Watanabe, K. Kawamura, T. Minemoto, Influence of averaged Ga/III in Cu(In,Ga)Se2 fabricated by multi-layer precursor method upon cell efficiency, in: Proceedings of 28th EU-PVSEC, 2013, pp. 2292–229510.1016/j.tsf.2014.01.009 ↗
13. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
14. Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe210.1063/1.353020 ↗
15. Device modeling and simulation of the performance of Cu(In,Ga)Se2 solar cells10.1016/S0038-1101(03)00289-2 ↗
16. Defect physics of CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
17. Influence of iron on defect concentrations and device performance for Cu(In,Ga)Se2 solar cells on stainless steel substrates10.1002/pip.2260 ↗
18. CIGS thin-film solar cells on steel substrates10.1016/j.tsf.2008.11.016 ↗
19. Enhancing efficiency of Cu(In,Ga)Se2 solar cells on flexible stainless steel foils using NaF co-evaporation10.1016/j.solener.2013.03.010 ↗
20. Dielectric barriers for flexible CIGS solar modules10.1016/S0040-6090(01)01516-4 ↗
21. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells—recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
22. Effect of Cu deficiency on the optical bowing of chalcopyrite Cu In1−x GaxSe210.1063/1.2089154 ↗
23. Dielectric function of Cu(In, Ga)Se2-based polycrystalline materials10.1063/1.4790174 ↗
24. Investigation of compositional inhomogeneities in complex polycrystalline Cu(In,Ga)Se2 layers for solar cells10.1063/1.3280049 ↗
25. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
26. Na impurity chemistry in photovoltaic CIGS thin films: investigation with X-ray photoelectron spectroscopy10.1116/1.580902 ↗
27. Surface characterization of chemically treated Cu(In, Ga)Se2 thin films10.1143/JJAP.35.4760 ↗
28. Influence of KCN treatment on CuInS2 thin films10.1016/0169-4332(95)00236-7 ↗
29. Annealing studies on CuIn(Ga)Se2: the influence of gallium10.1016/S0040-6090(99)00810-X ↗
30. Raman spectroscopy of CuInSe2 thin films prepared by selenization10.1016/S0022-3697(03)00216-6 ↗
31. Impact of electronic defects on the Raman spectra from electrodeposited Cu(In,Ga)Se2 solar cells: application for non-destructive defect assessment10.1063/1.4793418 ↗
32. Defect formation in Cu(In,Ga)Se2 thin films due to the presence of potassium during growth by low temperature co-evaporation process10.1063/1.4832781 ↗
33. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗