journal article·2013-04

Improvement in stability of bilayer organic solar cells using an ultra-thin Au layer

Saeed Saleh Ardestani, Rasul Ajeian, Moosa Nakhaee Badrabadi, Mohammad Tavakkoli

Publisher page

Abstract

Abstract In order to improve the stability of organic solar cells based on CuPc/C 60 planar heterojunction, an ultra-thin layer of Au (∼2 nm) is inserted between CuPc and PEDOT:PSS. Although, short circuit current density ( J sc ) and open circuit voltage ( V oc ) of the device containing Au layer are less than those of the Au-free one, it has comparable power conversion efficiency ( η p ) owing to its higher fill factor (FF). In addition, this ultra-thin Au layer enhances the stability of the device significantly. After a month under ambient condition, the device with “indium thin oxide (ITO)/PEDOT:PSS/Au” anode reaches 67% of its initial η p value, while the η p of the cell with “ITO/PEDOT:PSS” anode drops to less than half of its initial value. The improvement in stability is ascribed to the more durable Au/CuPc interface in contrast to the PEDOT:PSS/CuPc interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Stable small-molecule organic solar cells with 1,3,5-tris(2-N-phenylbenzimidazolyl) benzene as an organic buffer10.1016/j.tsf.2007.03.187 ↗
2. Small-molecule organic solar cells with improved stability10.1016/j.cplett.2005.09.052 ↗
3. Development of air stable polymer solar cells using an inverted gold on top anode structure10.1016/j.tsf.2004.10.018 ↗
4. Progress in stability of organic solar cells exposed to air10.1016/j.solmat.2011.01.029 ↗
5. Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer10.1016/j.tsf.2009.07.015 ↗
6. Degradation of small-molecule organic solar cells10.1063/1.2422911 ↗
7. Sequence of annealing polymer photoactive layer influences the air stability of inverted solar cells10.1016/j.orgel.2009.08.013 ↗
8. Influence of Alq3/Au cathode on stability and efficiency of a layered organic solar cell in air10.1016/j.solmat.2008.06.002 ↗
9. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
10. Encapsulation of pentacene/C60 organic solar cells with Al203 deposited by atomic layer deposition10.1063/1.2751108 ↗
11. The investigation of the stability and optimal encapsulation time for ITO/CuPc/C60/Al bilayer cells10.1016/j.solmat.2010.01.001 ↗
12. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
13. Stability of polymer solar cells10.1002/adma.201104187 ↗
14. Analysis of the failure mechanism for stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
15. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: by oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
16. Lifetimes of organic photovoltaics: using TOF-SIMS and 18O2 isotopic labelling tocharacterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
17. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
18. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
19. Photovoltaic and photoconductive properties of aluminum/poly(p-phenylene vinylene) interfaces10.1016/0379-6779(94)90215-1 ↗
20. Influence of molecular architecture and intermixing on the photovoltaic, morphologicaland spectroscopic properties of CuPc–C60 heterojunctions10.1016/j.solmat.2004.02.027 ↗
21. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
22. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
23. The characteristics of the small molecule organic solar cells with PEDOT:PSS/LiF double anode buffer layer system10.1016/j.solmat.2009.12.014 ↗
24. Anode buffer layer containing Au nanoparticles for high stability organic solar cells10.2494/photopolymer.23.313 ↗
25. Enhancing the durability of polymer solar cells using gold nano-dots10.1016/j.solmat.2011.06.043 ↗
26. Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells10.1016/j.orgel.2012.01.033 ↗
27. Vapor deposited solar cells based on heterojunction or interpenetrating networks of zinc phthalocyanine and C60
28. Improvement in the hole collection of polymer solar cells by utilizing gold nanoparticle buffer layer10.1016/j.cplett.2008.01.013 ↗
29. Work function measurements on indium tin oxide films10.1016/S0368-2048(01)00310-3 ↗
30. The effect of a buffer layer on the photovoltaic properties of solar cells with P3OT: fullerene composites10.1016/j.synthmet.2005.07.182 ↗
31. Influence of buffer layers on the performance of polymer solar cells10.1063/1.1739279 ↗
32. On the function of bathocuproine buffer layer in organic photovoltaic cells10.1063/1.2362624 ↗
33. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
34. Imbalanced mobilities causing S-shaped IV curves in planar heterojunctionorganic solar cells10.1063/1.3553764 ↗
35. Identification of different origins for s-shaped current voltage characteristics in planar heterojunctionorganic solar cells10.1063/1.3692050 ↗
36. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
37. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
38. Influence of water on the work function of conducting poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)10.1063/1.2435350 ↗