journal article·2013-01

Experimental study on the elimination of over-plating problems in industrial manufacturing of large-area acidic-textured laser-doped multi-crystalline solar cells

Su Zhou, Chunlan Zhou, Wenjing Wang, Yehua Tang, Jingwei Chen, Baojun Yan, Yan Zhao

Publisher page

Abstract

Abstract Light-induced plating (LIP) techniques, which are self-aligned and are used in the fabrication of well-shaped metal grids, have been widely studied and used in solar cells, particularly in laser-doped selective emitter (LDSE) ones. However, the application of LIP techniques in standard acidic-textured multi-crystalline silicon wafers with SiN x -coated surfaces can be challenging because of the presence of some unwanted metals on the SiN x surface during the plating process. This phenomenon is called over-plating, a problem in industrial LDSE multi-crystalline Si solar cell manufacturing that this paper aims to eliminate without the addition of any new process steps. The feasibility of changing the texturing process as well as the pretreatment before plating and the deposition of SiN x to reduce over-plating was investigated. The effects of over-plating on solar cell performance were also investigated to determine the mechanism of performance degradation. The cells reached a maximum efficiency of 17.2% and an average efficiency of 17.1% on large-area, commercial-grade, p-type multi-crystalline Si substrates when the over-plating problem was eliminated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. A novel two step metallization of Ni/Cu for low concentrator c-Si solar cells10.1016/j.solmat.2010.06.032 ↗
2. J. Bartsch, A. Mondon, B.-J. Godejohann, M. Hörteis, S.W. Glunz, Advanced Front Side Metallization for Crystalline Silicon Solar Cells Based on a Fully Plated Contact, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 2010, pp. 1978–1983.
3. D. Kray, N. Bay, G. Cimiotti, S. Kleinschmidt, N. Koesterke, A. Loesel, M. Sailer, A. Traeger, H. Kuehnlein, H. Nussbaumer, C. Fleischmann, F. Granek, Industrial LCP Selective Emitter Solar Cells with Plated Contacts, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Hawaii, USA, 2010, pp. 000667–000671.10.1109/PVSC.2010.5616896 ↗
4. Ni/Cu metallization for low-cost high-efficiency PERC cells10.1016/S0927-0248(02)00049-1 ↗
5. B. Tjahjono, S. Wang, A. Sugianto, L. Mai, Z. Hameiri, N. Borojevic, A. Ho-Baillei, S. Wenham, Application of laser doped contact structure on multicrystalline solar cells, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008, pp. 1995–2000.
6. C.L. Zhou, T. Li, W.J. Wang, L. Zhao, H.L. Li, Y.H. Tang, H.W. Diao, Y. Song, Z.H. Gao, Y. Duan, Y.Z. Li, The Effect of Saw Mark on the Over-Ghosting for Acidic Textured Multicrystalline Wafers with Silicon Nitride Anti-Reflectance Films, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, pp. 002221–002224.10.1109/PVSC.2011.6186398 ↗
7. Overcoming over-plating problems for PECVD SiNx passivated laser doped p-type multi-crystalline silicon solar cells10.1016/j.solmat.2011.12.003 ↗
8. SiOx(C)/SiNx dual-layer anti-reflectance film coating for improved cell efficiency10.1016/j.solener.2011.09.007 ↗
9. S..Wenham, B. Tjahjono, N. Kuepper, A. Lennon, Improved Metallization Method for Silicon Solar Cells, World Patent 2011/050399, 2011.
10. R. Dumbrell, P. Hamer, A. Lennon, B. Tjahjono, Emitter Etch-Back Application for Selective Emitter Silicon Solar Cells, in: Proceedings of SOLA 2010 (AuSES), Australian Solar Energy Society Conference, Canberra, 2010.
11. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
12. R. Einhaus, E. Vazsonyi, J. Szlufcik, J. Nijs, R. Mertens, Isotropic Texturing of Multicrystalline Silicon Wafers with Acidic Texturing Solutions in: Proceedings of the Photovoltaic Specialists Conference, 1997, Conference Record of the Twenty-Sixth IEEE, 1997, pp. 167–170.10.1109/PVSC.1997.654055 ↗
13. The hydrogen content of plasma-deposited silicon nitride10.1063/1.325095 ↗
14. The preparation, properties and applications of silicon nitride thin films deposited by plasma-enhanced chemical vapor deposition10.1016/0040-6090(91)90495-J ↗
15. Overview on SiN surface passivation of crystalline silicon solar cells10.1016/S0927-0248(00)00099-4 ↗
16. B. Lenkeit, T. Lauinger, A.G. Aberle, R. Hezel, Comparison of Remote Versus Direct PECVD Silicon Nitride Passivation of Phosphorus-Diffused Emitters of Silicon Solar Cells, in: Proceedings of the 2nd World Conference on Photovoltaic Solar Energy Conversion, Vienna, Austria, 1998, pp. 1434–1437.
17. B. Hallam, S. Wenham, M. Edwards, H. Lee, E. Lee, H. Lee, J. Kim, J. Shin, Record industrial cell efficiency fabricated on commercial grade p-type CZ substrates, in: Proceedings of 21st Photovoltaic Science and Engineering Conference PVSEC21, Fukuoka, 2011.
18. Record large-area p-type CZ production cell efficiency of 19.3% based on LDSE technology10.1109/JPHOTOV.2011.2164392 ↗
19. Double layer SiNx:H films for passivation and anti-reflection coating of c-Si solar cells10.1016/j.tsf.2011.04.078 ↗
20. C. Andres, C. Florence, T. Jason, M. Helmut, W. Saul, R. Kristin, FTIR Analysis of Microwave-Excited PECVD Silicon Nitride Layers, in: Proceedings of the 4th IEEE World Conference on Photovoltaic Energy Conversion, Hawaii, USA, 2006, pp. 1148–1151.10.1109/WCPEC.2006.279365 ↗
21. Analysis of selective phosphorous laser doping in high-efficiency solar cells10.1109/TED.2009.2024032 ↗