journal article·2014-01

Pd distribution of switchable mirrors based on Mg–Y alloy thin films

Y. Yamada, M. Miura, K. Tajima, M. Okada, K. Yoshimura

Publisher page

Abstract

Abstract Pd-capped magnesium–yttrium alloy switchable mirrors were found to have high switching durability of over 10,000 cycles between reflective and transparent states. However, the durability decreased with the decreasing Pd thickness. Switchable mirrors with various Pd thicknesses were then prepared by a direct-current magnetron sputtering method, and the degradation in durability was studied by observing the distribution of each element of the switchable mirrors from the film surface to the substrate. X-ray photoemission spectroscopy and transmission electron microscopy showed that Pd with a short sputtering time (corresponding to layer thickness of 3 nm) resulted in surface oxidation of Mg and Y, and no Pd was present at the surface. The deposited Pd was alloyed with the Mg–Y layer and after taking the sample out from the vacuum chamber a Pd-rich layer appeared between the surface oxides and the Mg–Y layers. With increasing deposition time, a Pd layer was formed on the oxide layer and the Pd layer thickness increased. The mirror with switching durability of over 10,000 cycles had a sufficiently thick Pd top layer of ~7 nm and a very thin oxide layer. This thick Pd layer is believed to be the reason for the high switching durability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Yttrium and lanthanum hydride films with switchable optical properties10.1038/380231a0 ↗
2. Hydriding kinetics of Pd capped YHx switchable mirrors10.1063/1.371660 ↗
3. Optical switches based on magnesium lanthanide alloy hydrides10.1063/1.119169 ↗
4. Contrast enhancement of rare-earth switchable mirrors through microscopic shutter effect10.1063/1.124912 ↗
5. Insulating fcc YH3−δ stabilized by MgH2
6. Switchable mirrors based on nickel–magnesium films10.1063/1.1371959 ↗
7. Structural, optical, and electrical properties of MgyTi1−yHx thin films10.1103/PhysRevB.75.205408 ↗
8. Optical switching of Mg-rich Mg–Ni alloy thin films10.1063/1.1530378 ↗
9. Optical switching durability of switchable mirrors based on magnesium–yttrium alloy thin films10.1016/j.solmat.2013.06.050 ↗
10. Preparation and characterization of gasochromic switchable-mirror window with practical size10.1016/j.solmat.2009.03.023 ↗
11. X-ray excited Auger and photoelectron spectra of magnesium, some alloys of magnesium and its oxide10.1088/0305-4608/5/2/020 ↗
12. Oxygen-segregation-controlled epitaxy of Y2O3 films on Nb(110)10.1007/s003390000569 ↗
13. Massalski · 1992 · vol. 3 · 2535
14. Massalski · 1992 · vol. 3 · 3065
15. Effect of the strong metal-support interaction on hydrogen sorption kinetics of Pd-capped switchable mirrors10.1103/PhysRevB.70.155414 ↗