An innovative design of arrays-interpenetrated CZTSSe/MoO3 back interfacial contacts for improving the solar cell performance
Source abstract
Abstract
It is widely known that the challenge of making good electrical contact at the back electrode interface will always follow us for high-efficient kesterite-type CZTSSe thin-film solar cells. Aiming at clarifying the correlation of device performance on the micro-structure of back interface, we come up with a new fresh design that introducing in-situ anodized MoO 3 porous arrays with regulated structural parameters acts as the back interfacial contact. Regards the such array-structures of interpenetrated CZTSSe and MoO 3, the study reveals that the overall device performance is closely related to the micro-structure of the MoO 3 interface layer, and the optimized device efficiency can be improved to 9.00% from 6.31% (Ref. Mo-based cells), having a 32% increased J SC together with a 64% increase in FF. The performance improvement mechanism is analyzed in details. The interesting preliminary finding would indicate that the new strategy is very effective to form reliable electrical contact at the back interface for high-efficient CZTSSe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
2. Band-gap-graded Cu2ZnSn(S,Se)4 drives highly efficient solar cells10.1039/D1EE03134A ↗
3. Novel symmetrical bifacial flexible CZTSSe thin film solar cells for indoor photovoltaic applications10.1038/s41467-021-23343-1 ↗
4. Efficient and composition-tolerant kesterite Cu2ZnSn(S,Se)4 solar cells derived from an in situ formed multifunctional carbon framework10.1002/aenm.202102298 ↗
5. Device characteristics of band gap tailored 10.04% efficient CZTSSe solar cells sprayed from water-based solution10.1021/acsami.9b12565 ↗
6. Interfacial engineering of wide-bandgap perovskites for efficient perovskite/CZTSSe tandem solar cells
7. Solar cell efficiency tables (Version 60)10.1002/pip.3595 ↗
8. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
9. Insights into interface and bulk defects in a high efficiency kesterite-based device10.1039/D0EE02004D ↗
10. Heterojunction post-heat treatment process driving high efficiency for Cu2ZnSnS4 solar cell10.1016/j.solmat.2021.111204 ↗
11. Defect characterisation in Cu2ZnSnSe4 kesterites via resonance Raman spectroscopy and the impact on optoelectronic solar cell properties10.1039/C9TA03625C ↗
12. Engineering the band offsets at the back contact interface for efficient kesterite CZTSSe solar cells10.1021/acsaem.0c01932 ↗
13. Modulation of field-effect passivation at the back electrode interface enabling efficient kesterite-type Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/acsami.0c10561 ↗
14. Insights into kesterite's back contact interface: a status review10.1016/j.solmat.2019.04.033 ↗
15. Numerical study to improve the back interface contact of CZTSSe solar cells using oxygen-doped Mo(Se1–x, Ox)210.1021/acs.jpcc.1c04129 ↗
16. Efficiency enhancement of Cu2ZnSn(S, Se)4 solar cells by addition a CuSe intermediate layer between Cu2ZnSn(S, Se)4 and Mo electrode10.1016/j.jallcom.2022.165056 ↗
17. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
18. Effect of TaN intermediate layer on the back contact reaction of sputter-deposited Cu poor Cu2ZnSnS4 and Mo10.1016/j.apsusc.2018.11.227 ↗
19. On the interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗
20. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface
21. MoO2 sacrificial layer for optimizing back contact interface of Cu2ZnSn(S,Se)4 solar cells10.1109/JPHOTOV.2020.2987165 ↗
22. Eliminating multi-layer crystallization of Cu2ZnSn(S,Se)4 absorber by controlling back interface reaction10.1016/j.nanoen.2020.105042 ↗
23. Enhancing back interfacial contact by in-situ prepared MoO3 thin layer for Cu2ZnSnSxSe4-x solar cells10.1007/s40843-018-9381-1 ↗
24. Chemical dynamics of back contact with MoO3 interfacial layer in kesterite solar cells: microstructure evolution and photovoltaic performance10.1002/solr.201900131 ↗
25. Modification of Mo back contact with MoO3-x layer and its effect to enhance the performance of Cu2ZnSnS4 solar cells10.1002/solr.201800243 ↗
26. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
27. Improving efficiency of electrostatic spray-assisted vapor deposited Cu2ZnSn(S,Se)4 solar cells by modification of Mo/absorber interface10.1016/j.tsf.2015.11.027 ↗
28. Improving Cu2ZnSnS4 (CZTS) solar cell performance by an ultrathin ZnO intermediate layer between CZTS absorber and Mo back contact10.1002/pssr.201409052 ↗
29. Self-alignment of bottom CZTSSe by patterning of an Al2O3 intermediate layer10.3390/nano10010043 ↗
30. Significantly enhancing response speed of self-powered Cu2ZnSn(S,Se)4 thin film photodetectors by atomic layer deposition of simultaneous electron blocking and electrode protective Al2O3 layers10.1021/acsami.9b08405 ↗
31. Ge bidirectional diffusion to simultaneously engineer back interface and bulk defects in the absorber for efficient CZTSSe solar cells
32. Modification of absorber quality and Mo-back contact by a thin Bi intermediate layer for kesterite Cu2ZnSnS4 solar cells10.1016/j.solmat.2015.09.066 ↗
33. Impact of silver incorporation at the back contact of kesterite solar cells on structural and device properties10.1016/j.tsf.2020.138223 ↗
34. Ag, Ge dual-gradient substitution for low-energy loss and high-efficiency kesterite solar cells10.1039/D0TA06318E ↗
35. Boosting Cu2ZnSnS4 solar cells efficiency by a thin Ag intermediate layer between absorber and back contact10.1063/1.4863951 ↗
36. Effect of a graphene oxide intermediate layer in Cu2ZnSn(S,Se)4 solar cells10.1039/C9TA13080B ↗
37. Modulation of field-effect passivation at the back electrode interface enabling efficient kesterite-type Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/acsami.0c10561 ↗
38. Self-organized back surface field to improve the performance of Cu2ZnSn(S,Se)4 solar cells by applying p-type MoSe2:Nb to the back electrode interface10.1021/acsami.9b08946 ↗
39. Fabrication of oxygen-doped MoSe2 hierarchical nanosheets for highly sensitive and selective detection of trace trimethylamine at room temperature in air10.1007/s12274-020-2796-7 ↗
40. Identifying substitutional oxygen as a prolific point defect in monolayer transition metal dichalcogenides10.1038/s41467-019-11342-2 ↗
41. Influence of Mo-pretreating on microstructure evolution of solution-processed absorbers for high efficient CZTSSe solar cells10.1016/j.matlet.2022.131992 ↗
42. The effect of thermal evaporated MoO3 intermediate layer as primary back contact for kesterite Cu2ZnSnS4 solar cells10.1016/j.tsf.2018.01.012 ↗
43. Improvement of kesterite solar cell performance by solution synthesized MoO3 interfacial layer10.1002/pssa.201600534 ↗
44. Regulation of selenium composition by supercritical carbon dioxide for CZTSSe solar cells efficiency improvement10.1016/j.solmat.2021.111308 ↗
45. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
46. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
47. Two-step annealing CZTSSe/CdS heterojunction to improve interface properties of kesterite solar cells10.1021/acsami.1c18152 ↗
48. Temperature dependent behavior of single walled MoO3 nanotubes: a Raman spectroscopy study10.1016/j.vibspec.2010.10.002 ↗
49. Micro-Raman study of the m-MoO2 to α-MoO3 transformation induced by cw-laser irradiation10.1016/j.optmat.2010.10.028 ↗
50. Photocatalytical properties of maze-like MoO3 microstructures prepared by anodization of Mo plate10.1016/j.electacta.2017.01.064 ↗
51. Strong interplay between sodium and oxygen in kesterite absorbers: complex formation, incorporation, and tailoring depth distributions10.1002/aenm.201900740 ↗
52. Impact of nanoscale elemental distribution in high-performance kesterite solar cells10.1002/aenm.201402180 ↗
53. An effective Li-containing interfacial-treating strategy for performance enhancement of air-processed CZTSSe solar cells10.1016/j.solmat.2021.111102 ↗
54. The influence of interstitial carbon and oxygen on grain boundary diffusion in nickel and silver10.1007/s11182-021-02290-w ↗
55. Influence of lattice distortion on phase transition properties of polycrystalline VO2 thin film10.1016/j.apsusc.2016.04.007 ↗
56. The role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS4
57. Enhancement of open-circuit voltage of solution-processed Cu2ZnSnS4 solar cells with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
58. Optoelectronic and material properties of nanocrystal-based CZTSe absorbers with Ag-alloying10.1016/j.solmat.2015.10.039 ↗
59. Daniel · 2011
60. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
61. Nanoscale electrical property enhancement through antimony incorporation to pave the way for the development of low-temperature processed Cu2ZnSn(S,Se)4 solar cells10.1039/C8TA11783G ↗
62. Bifacial sodium-incorporated treatments: tailoring deep traps and enhancing carrier transport properties in Cu2ZnSnS4 solar cells10.1016/j.nanoen.2015.07.022 ↗
63. Defect engineering in earth-abundant Cu2ZnSn(S,Se)4 photovoltaic materials via Ga3+-doping for over 12% efficient solar cells10.1002/adfm.202010325 ↗