Effect of the mesoporous size, structure and surface on the melting and heat transport properties of solar salt
Source abstract
Abstract
Molecular dynamics simulations combined with experimental methods were used to summarize the changes of thermophysical parameters such as bulk thermal expansion coefficient, thermal conductivity, specific heat capacity at constant pressure and melting point, which based on the radial distribution function and interaction energy. The micro-mechanisms of the melting and heat transport properties of solar salts at the nanoscale were analyzed. The simulation and experimental results show that the bulk thermal expansion coefficient of solar salt decreases with the increase of the mesopore size. At the same scale, the bulk thermal expansion coefficient of the nanopillar solar salt is smaller than that of the spherical structure solar salt in the nanopore. The raising of the scale enhances the thermal conductivity of the solar salt, but has little effect on the specific heat capacity. The thermal conductivity and specific heat capacity of the CPCM are improved with the increase of Al 2O 3 in the skeleton. The variation of the skeleton structure has a certain influence on the specific heat capacity of CPCM. The melting point of solar salt shows a trend of increasing and then decreasing with the raising of nanopore size. The change of the mesoporous structure affects the melting point of CPCM. The addition of the porous alumino silicate ceramic skeleton reduces the melting point of the solar salt. And the melting point of the CPCM with larger interfacial binding energy is relatively higher.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Solar energy for future world:-A review10.1016/j.rser.2016.05.022 ↗
2. Research progress of heat storage materials in concentrated solar thermal power generation
3. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
4. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
5. Nitrate based nanocomposite thermal storage materials: understanding the enhancement of thermophysical properties in thermal energy storage10.1016/j.solmat.2020.110727 ↗
6. Al–Si@Al2O3@mullite microcapsules for thermal energy storage: preparation and thermal properties10.1016/j.solmat.2020.110697 ↗
7. Preparation and characterization of KNO3/diatomite shape-stabilized composite phase change material for high temperature thermal energy storage10.1016/j.jmst.2016.02.011 ↗
8. Effect of the fabrication process on the thermophysical properties of Ca(NO3)2-NaNO3/expanded graphite phase change material composites
9. Preparation and thermophysical properties of expanded graphite/nitric ACID MOLTEN SALT composite phase change materials
10. Diatomite: a promising natural candidate as carrier material for low,middle and high temperature phase change material10.1016/j.enconman.2015.03.071 ↗
11. Molecular dynamics simulation on thermal enhancement for carbon nano tubes (CNTs) based phase change materials (PCMs)10.1016/j.ijheatmasstransfer.2021.122017 ↗
12. Study on preparation and stability of quaternary nitrate/MCM-41 porous composite thermal storage materials
13. Thermal Properties of nitrate/expanded graphite composite phase change materials
14. Feng · 2019
15. Simulation of thermal properties of -Al2O3 mesoporous materials
16. The role of pore size and structure on the thermal stability of gold nanoparticles within mesoporous silica10.1021/jp045917p ↗
17. Thermal properties of C17H36/MCM-41 composite phase change materials10.1016/j.commatsci.2015.07.033 ↗
18. Physical control of phase behavior of hexadecane in nanopores10.1021/acs.jpcc.5b03728 ↗
19. Enhanced thermal properties of novel shape-stabilized PEG composite phase change materials with radial mesoporous silica sphere for thermal energy storage10.1038/srep12964 ↗
20. High performance shape-stabilized phase change material with nanoflower-like wrinkled mesoporous silica encapsulating polyethylene glycol: preparation and thermal properties
21. Analysis of scale effect and structure effect on solidification characteristics of solar salt in mesopores
22. Influence of size effect on temperature boundary of solid-liquid interface in microchannel
23. Molecular dynamics simulation of the relationship between contact angle and thermal resistance of liquid-solid interface
24. Molecular dynamics study of thermal resistance of solid-liquid interface in contact with single layer of nanoparticles10.1016/j.ijheatmasstransfer.2017.12.061 ↗
25. Polymer crystallization: metastable mesophases and morphology10.1021/ma0615147 ↗
26. Phase transition behavior of small aluminum nanoclusters
27. High thermal conductivity of single polyethylene chains using molecular dynamics simulations
28. Insight into the viscosity enhancement ability of Ca(NO3)2 on the binary molten nitrate salt: a molecular dynamics simulation study10.1016/j.cej.2018.09.190 ↗
29. Ceramic-salt based composites for thermal energy storage
30. Expanded graphite and graphene improve thermal properties of inorganic salt phase change materials
31. Study on thermal properties of porous aluminosilicate ceramic matrix for energy storage
32. Specifc heat capacity enhancement studied in silica doped potassium nitrate via molecular dynamics simulation
33. Separation of nitrate ion from water using silicon carbide nanotubes as a membrane: insights from molecular dynamics simulation10.1016/j.commatsci.2016.03.046 ↗
34. Molecular dynamics simulation studies on structure, dynamics, and thermodynamics of uranyl nitrate solution at various acid concentrations10.1021/acs.jpcb.9b01498 ↗
35. Anagnostopoulos · 2019 · vol. 200
36. Molecular Dynamics simulation of Au rapid solidification and crystal growth
37. Molecular simulations of the thermal and transport properties of alkali chloride salts for high-temperature thermal energy storage10.1016/j.ijheatmasstransfer.2016.07.042 ↗
38. Effect of graphene orientation on heat transfer properties of graphene/nitrates composites by molecular dynamics simulation
39. Thermal energy storage – overview and specific insight into nitrate salts for sensible and latent heat storage10.3762/bjnano.6.154 ↗
40. Structural evolution of Ti-Al during rapid solidification processing revealed by molecular dynamics simulations
41. Effect of graphene orientation on heat transfer properties of graphene/nitrate composites molecular dynamics simulations
42. Thermal resistance between crossed carbon nanotubes: molecular dynamics simulations and analytical modeling10.1063/1.4842896 ↗
43. Anatole von . Molecular Simulation of the Thermal and Transport Properties of Three Alkali Nitrate Salts10.1021/ie9007216 ↗
44. Molecular dynamics study on the thermal conductivity of graphene and pentaerythritol phase change composites
45. Zhang · 2018
46. Research progress on the preparation of porous ceramics by freeze-drying10.3724/SP.J.1077.2013.12625 ↗
47. Preparation and properties of biomass porous carbon matrix composite phase change materials
48. Molecular Dynamics simulation of the structure and properties of NaNO3-KNO3-NaNO2 ternary mixed phase transition salts
49. Metal thermal expansion coefficient and bond energy
50. Thermal expansion of potassium nitrate10.1007/BF03048789 ↗
51. Zhang · 2017
52. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
53. Research on preparation and performance of Al2O3/PP thermal conductive composite
54. An apparatus for the routine measurement of thermal conductivity of materials for building application based on a transient hot-wire method10.1016/j.applthermaleng.2007.02.008 ↗
55. Nucleation temperature of elements10.1063/1.1520145 ↗
56. Thermal conductance of thin silicon nanowires10.1103/PhysRevLett.101.105501 ↗
57. Li · 2018
58. Wang · 2013
59. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗
60. D. Y. Che, H. Shen, W. Q. Jiang, Theoretical prediction of phase transition temperature and latent heat of binary mixed inorganic salts, Inorganic salt industry. 47 (8) 2015 30-34.
61. Thermodynamic theory of size dependence of melting temperature in metals10.1038/269481a0 ↗
62. Solid-liquid transition in ultra-fine lead particles10.1080/01418619508236241 ↗
63. The effects of size on melting points
64. Molecular dynamics simulation and analysis of melting and surface melting behavior of metallic Cu
65. Jiang · 2013
66. Sememchenko · 1961 · 281
67. Preparation and properties of exfoliated expanded graphite/molten salt materials
68. Thermal energy storage-overview and specific insight into nitrate salts for sensible and latent heat storage10.3762/bjnano.6.154 ↗
69. Guan · 2021
70. Aluminum doping of mesoporous silica as a promising strategy for increasing the energy storage of shape stabilized phase change materials containing molten NaNO3: KNO3 eutectic mixture