Application of Bayesian optimization for high-performance TiO /SiO /c-Si passivating contact
Source abstract
Abstract
We report on the application of Bayesian optimization (BO), which could accelerate the time-intensive process optimization of many parameters, to fabrication of the high-performance titanium oxide/silicon oxide/crystalline silicon passivating contact. The process contains pre-deposition treatment to form SiOy interlayer, atomic layer deposition (ALD) of TiOx, and hydrogen plasma treatment (HPT) as post-process. We attempted to optimize seven parameters for ALD and HPT by dealing with samples treated by three kinds of chemical solutions in the same batch. This permits to perform BO for each structure at the same time and determine the superior pre-deposition treatment. Consequently, carrier selectivity S10 estimated by independent measurements of the saturation current density and contact resistance was significantly improved by BO of only 12 cycles and 10 initial random experiments. These results certify that BO could efficiently provide experimental conditions in multidimensional parameter space although we need to consider the impact of the metallization process on the passivation performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
2. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
3. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
4. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
5. Infrared absorption strength and hydrogen content of hydrogenated amorphous silicon10.1103/PhysRevB.45.13367 ↗
6. Analytical model for the optical functions of amorphous semiconductors from the near-infrared to ultraviolet: applications in thin film photovoltaics10.1063/1.1497462 ↗
7. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
8. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
9. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
10. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector
11. 23.5%-efficient silicon heterojunction silicon solar cell using molybdenum oxide as hole-selective contact10.1016/j.nanoen.2020.104495 ↗
12. V2Ox-based hole-selective contacts for c-Si interdigitated back-contacted solar cells10.1039/C7TA01959A ↗
13. Sputtered tungsten oxide as hole contact for silicon heterojunction solar cells10.1109/JPHOTOV.2017.2714193 ↗
14. Hole-blocking titanium-oxide/silicon heterojunction and its application to photovoltaics10.1063/1.4803446 ↗
15. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
16. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
17. Industrially feasible, dopant-free, carrier- selective contacts for high-efficiency silicon solar cells10.1002/pip.2901 ↗
18. Titanium dioxide/silicon hole- blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell10.1063/1.4916540 ↗
19. Band alignment of rutile and anatase TiO210.1038/nmat3697 ↗
20. Effect of crystal structure on optical properties of TiO2 films grown by atomic layer deposition10.1016/S0040-6090(97)00135-1 ↗
21. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
22. Excellent c-Si surface passivation by low-temperature atomic layer deposited titanium oxide10.1063/1.4885096 ↗
23. Passivation of boron-doped industrial silicon emitters by thermal atomic layer deposited titanium oxide10.1109/JPHOTOV.2015.2434596 ↗
24. Ultrathin titanium dioxide nanolayers by atomic layer deposition for surface passivation of crystalline silicon10.1109/JPHOTOV.2016.2545404 ↗
25. Surface passivation and carrier selectivity of the thermal-atomic-layer-deposited TiO2 on crystalline silicon10.7567/JJAP.56.08MA11 ↗
26. Effective passivation of crystalline silicon surfaces by ultrathin atomic-layer-deposited TiOx layers10.1016/j.egypro.2017.09.272 ↗
27. Local structure of high performance TiOx electron-selective contact revealed by electron energy loss spectroscopy10.1002/admi.201801645 ↗
28. Activation energy of hydrogen desorption from high-performance titanium oxide carrier-selective contacts with silicon oxide interlayers10.1016/j.cap.2020.10.002 ↗
29. Activation mechanism of TiOx passivating layer on crystalline Si10.7567/APEX.11.102301 ↗
30. Effect of forming gas annealing on hydrogen content and surface morphology of titanium oxide coated crystalline silicon heterocontacts10.1116/1.5134719 ↗
31. Room temperature H2 plasma treatment for enhanced passivation of silicon/TiO2 interface10.1063/1.5035459 ↗
32. Effect of hydrogen plasma treatment on the passivation performance of TiOx on crystalline silicon prepared by atomic layer deposition10.1116/1.5134720 ↗
33. Application of Bayesian optimization for improved passivation performance in TiOx/SiOy/c-Si heterostructure by hydrogen plasma treatment10.35848/1882-0786/abd869 ↗
34. Atomic-layer-deposited TiOx nanolayers function as efficient hole-selective passivating contacts in silicon solar cells10.1021/acsami.0c14239 ↗
35. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
36. Accelerated search for materials with targeted properties by adaptive design10.1038/ncomms11241 ↗
37. Optimizing a high-entropy system: software-assisted development of highly hydrophobic surfaces using an amphiphilic polymer10.1021/acsomega.9b01978 ↗
38. Machine-learning-assisted thin-film growth: Bayesian optimization in molecular beam epitaxy of SrRuO3 thin films10.1063/1.5123019 ↗
39. Adaptive Bayesian optimization for epitaxial growth of Si thin films under various constraints10.1016/j.mtcomm.2020.101538 ↗
40. Taking the human out of the loop: a review of bayesian optimization10.1109/JPROC.2015.2494218 ↗
41. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
42. An expanded Cox and Strack method for precise extraction of specific contact resistance of transition metal oxide/n-silicon heterojunction10.1109/JPHOTOV.2019.2917386 ↗
43. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
44. Enhanced photocatalytic performance in atomic layer deposition grown TiO2 thin films via hydrogen plasma treatment10.1116/1.4904503 ↗
45. Amorphous/crystalline silicon interface defects induced by hydrogen plasma treatments10.1063/1.4811253 ↗
46. Hydrogen plasma treatments of amorphous/crystalline silicon heterojunctions10.1016/j.egypro.2014.08.066 ↗
47. Studies of diffused phosphorus emitters: saturation current, surface recombination velocity, and quantum efficiency10.1109/16.46368 ↗