journal article·2019-12Open access

Freestanding and supported processing of sub-70 μm kerfless epitaxial Si and thinned Cz/FZ Si foils into solar cells: An overview of recent progress and challenges

Hariharsudan Sivaramakrishnan Radhakrishnan, Jinyoun Cho, Twan Bearda, Julius Röth, Valérie Depauw, Kris Van Nieuwenhuysen, Ivan Gordon, Jozef Szlufcik, Jef Poortmans

Abstract

Abstract Utilisation of expensive silicon (Si) material in crystalline Si modules has come down to 4 g Si per watt-peak in 2018, mainly as a result of reduction in wafer thickness and kerf losses as well as increase in module efficiencies. With continued progress in conventional multi-wire sawing of ingots, wafers as thin as 100 μm could eventually be produced. Beyond this, kerfless lift-off technologies are being investigated which enable wafer thicknesses well below 100 μm with negligible Si kerf waste. Such thin Si wafers and foils would be much lighter in weight than today's standard 165-180 μm-thick wafers and would exhibit considerable flexibility and fragility. This necessitates a rethink about how to handle and process thin Si into solar devices in a manufacturing line with high mechanical yield and high throughput. This paper gives a broad overview of the different approaches for fabricating solar cells on thin Si foils. In particular, three routes are discussed in detail, namely (1) freestanding processing of thin Si, (2) processing of thin Si supported mechanically on a conductive low-cost Si substrate (“wafer-equivalent” approach) and (3) processing of thin Si bonded to a transparent glass superstrate. In each case, the main challenges are explained and the recent progress in addressing them are summarised. Kerfless 50 μm-thick epitaxial Si foils lifted-off using porous Si and thinned-down Si wafers (below 70 μm) are used as model substrates for this work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Itrpvvdmaorg · 2019
2. Philipps · 2019
3. Kerf-free wafering: technology overview and challenges for thin PV manufacturing
4. Review of layer transfer processes for crystalline thin-film silicon solar cells10.1143/JJAP.40.4431 ↗
5. H. Sivaramakrishnan Radhakrishnan, V. Depauw, I. Gordon, J. Poortmans, Lift-off Techniques for Kerfless Thin Crystalline Si Production, Adv. Energy Mater. [in Prep. (n.d.).
6. Stress-induced large-area lift-off of crystalline Si films10.1007/s00339-007-4195-2 ↗
7. Room temperature thin foil SLIM-cut using an epoxy paste: experimental versus theoretical results10.1088/2053-1591/2/4/046203 ↗
8. High-quality exfoliated crystalline silicon foils for solar cell applications10.1016/j.egypro.2014.08.028 ↗
9. A low cost kerfless thin crystalline Si solar cell technology
10. Kerf-less wafering using polymer split method for photovoltaic solar cells and modules
11. Laser-assisted spalling of large-area semiconductor and solid state substrates10.1557/mrc.2017.136 ↗
12. Thin-film crystalline silicon solar cells obtained by separation of a porous silicon sacrificial layer
13. Thin film solar cells on glass by transfer of monocrystalline Si films10.1155/S1110662X99000173 ↗
14. High quality epitaxial foils, obtained by a porous silicon based layer transfer process, for integration in back contacted solar cells
15. Improving the quality of epitaxial foils produced using a porous silicon-based layer transfer process for high-efficiency thin-film crystalline silicon solar cells10.1109/JPHOTOV.2013.2282740 ↗
16. High-efficiency cells from layer transfer: a first step toward thin-film/wafer hybrid silicon technologies10.1109/JPHOTOV.2011.2165529 ↗
17. 19%-efficient and 43 μm-thick crystalline Si solar cell from layer transfer using porous silicon10.1002/pip.1129 ↗
18. Epitaxially grown wafer based silicon heterojunction cells
19. Epitaxial N-type silicon solar cells with 20% efficiency
20. Silectra GmbH, (n.d.). https://www.siltectra.com/(accessed July 25, 2019).
21. NexWafe, (n.d.). http://www.nexwafe.com (accessed August 9, 2015).
22. Heterojunction solar cells with 23% efficiency on n -type epitaxial kerfless silicon wafers10.1002/pip.2813 ↗
23. 22.5% n-PERT solar cells on epitaxially grown silicon wafers
24. Crystal Solar, (n.d.). http://www.xtalsolar.com/(accessed July 25, 2019).
25. Amberwave, (n.d.). http://www.amberwave.com (accessed July 25, 2019).
26. Development of a 16.8% efficient 18 μm silicon solar cell on steel10.1109/JPHOTOV.2014.2344769 ↗
27. Epitaxial Si lift-off technology: current status and challenges
28. A manufacturable, non-plated, non-Ag metallisation based 20.44% efficient, 243 cm2 area, back contacted solar cell on 40 μm thick mono-crystalline silicon
29. Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costs10.1039/c2ee03489a ↗
30. Thin 60 μm-thick crystalline silicon solar cell on ceramic substrate by Al-bonding
31. Solanki · 2004
32. Kumar · 2014
33. I-module technology: evaluation and evolution
34. Development of a-Si:H/c-Si heterojunctions for the i2-module concept: low-temperature passivation and emitter formation on wafers bonded to glass10.1016/j.solmat.2013.01.029 ↗
35. CZ ingot and wafer for high-efficiency solar cells
36. SunPower · 2019
37. Okunski · 2013
38. Comprehensive experimental study on the performance of very thin laser-fired high-efficiency solar cells
39. Thin monocrystalline silicon solar cells10.1109/16.791996 ↗
40. How to deal with thin wafers in a heterojunction solar cells industrial line : first analysis of the integration of cells down to 70μn thick in production mode
41. Manufacturing 100-μm-thick silicon solar cells with efficiencies greater than 20% in a pilot production line
42. Detection of sub-500-μm cracks in multicrystalline silicon wafer using edge-illuminated dark-field imaging to enable thin solar cell manufacturing10.1016/j.solmat.2019.03.033 ↗
43. Layer transfer process assisted by laser scribing for thin film solar cells based on epitaxial foils
44. 4.5 ms effective carrier lifetime in kerfless epitaxial silicon wafers from the porous silicon process10.1109/JPHOTOV.2016.2642640 ↗
45. High efficiency solar cells on direct kerfless 156 mm mono crystalline Si wafers by high throughput epitaxial growth
46. Failure stress of epitaxial silicon thin films10.1016/j.egypro.2013.07.366 ↗
47. Optimisation of inline processes for the production of freestanding epitaxially grown thin films for solar cells
48. Stealth dicing technology and applications
49. High quality half-cell processing using thermal laser separation10.1016/j.egypro.2015.07.048 ↗
50. The influence of transport operations on the wafer strength and breakage rate
51. Advanced production challenges for automated ultra-thin wafer handling
53. Fabrication of silicon heterojunction cells on 50μm epitaxial substrates
54. Silicon heterojunction solar cells with open-circuit-voltage above 750 mV
55. Large-area thin-film free-standing monocrystalline Si solar cells by layer transfer
56. High-efficiency HIT solar cells with a very thin structure enabling a high voc
57. Thin crystalline silicon solar cell bonded to sintered substrate with aluminum paste10.1016/j.solmat.2004.11.007 ↗
58. Microstructural characterization of Si wafers processed by multi-wire sawing of hot pressed silicon powder based ingots10.1002/pssa.201431782 ↗
59. SINTERED LOW RESISTIVITY SUBSTRATES FOR HYBRID SOLAR CELLS
60. Solar cells on <50 μm thick epitaxial foils conductively bonded to low-cost Si carrier
61. Solar cells and mini-modules based on 40 μm-thick epitaxial Si foils: towards conductive bonding onto low-cost Si powder sintered supporting substrates
62. Characterization of electrical conductive adhesives (ECA) for the PV-industry
63. Electrically conductive adhesives as cell interconnection material in shingled module technology10.1063/1.5049305 ↗
64. High efficiency screen-printed 156cm2 solar cells on thin epitaxially grown silicon material
65. Advances in monocrystalline Si thin film solar cells by layer transfer10.1016/S0927-0248(02)00070-3 ↗
66. Solar cells from epitaxial foils: an epifoil epiphany
67. 2D periodic photonic nanostructures integrated in 40 μm thin crystalline silicon solar cells
68. Process development for heterojunction IBC cells on thin silicon foils
69. Cell-module integration concept compatible with c-si epitaxial thin foils and with efficiencies over 18%
70. Heterojunction interdigitated back-contact solar cells fabricated on wafer bonded to glass10.1109/JPHOTOV.2014.2307170 ↗
71. Qualification of encapsulation materials for module-level-processing10.1016/j.solmat.2013.06.012 ↗
72. Module-level cell processing of silicon heterojunction interdigitated back-contacted (SHJ-IBC) solar cells with efficiencies above 22%: towards all-dry processing
73. Plasma-silicone interaction during a-Si:H deposition on solar cell wafers bonded to glass10.1016/j.solmat.2014.01.035 ↗
74. Silicone oxidation for a-Si:H passivation of wafers bonded to glass10.1002/pssr.201409081 ↗
75. Silicon heterojunction interdigitated back-contact solar cells bonded to glass with efficiency >21%10.1016/j.solmat.2017.02.032 ↗
76. Heterojunction IBC solar cells on thin (< 50 μm) epitaxial Si foils produced from kerfless layer transfer process
77. Addressing the key challenges in the successful implementation of high efficiency porous silicon-based layer-transferred epitaxial solar modules
78. 9 ms carrier lifetime in kerfless epitaxial wafers by n-type POLO gettering
79. Kerfless layer-transfer of thin epitaxial silicon foils using novel multiple layer porous silicon stacks with near 100% detachment yield and large minority carrier diffusion lengths10.1016/j.solmat.2014.10.049 ↗
80. Passivation of photonic nanostructures for crystalline silicon solar cells10.1002/pip.2489 ↗
81. Lifetime measurements on attached epilayers and detached epifoils grown on reorganised porous silicon showing a bulk lifetime exceeding 100μs10.1016/j.egypro.2013.07.369 ↗
82. Thin epitaxial silicon foils using porous-silicon-based lift- off for photovoltaic application10.1557/adv.2016.314 ↗