A large-area fabrication of moth-eye patterned Au/TiO2 gap-plasmon structure and its application to plasmonic solar water splitting
Source abstract
Abstract
Abstract TiO 2 is promising candidate for solar water splitting material. To enhance the insufficient absorption range of TiO 2 , TiO 2 decorated with Au nanoparticles(AuNPs) structure have been studied intensively. This plasmonic approach can extend absorption range to visible light, but its incident photon-to-current conversion efficiency is still insufficient. Therefore, it is important to amplify surface plasmon resonance, obtained by using AuNPs. At the same time, for application to next-generation energy device, the way to improve this plasmonic effect needs to be available to large area fabrication, high reproducibility, low cost and so on. In this study, we successfully fabricated a three-dimensional (3D) moth-eye AuNP/TiO 2 /Au hierarchical structure for water splitting via direct printing method and deposition process. The proposed structure can effectively intensify the light–matter interaction owing to two mechanisms: Photonic mode light trapping attributed by moth-eye structure and enhanced surface plasmon resonance by gap-plasmon structure. Moth-eye structure, densely packed subwavelength-nanocone array, was easily fabricated by direct printing method. Using this moth-eye structure as a template, we effectively fabricated 3D moth-eye patterned gap-plasmon structure on 5 × 5 cm 2 . Compared with the two-dimensional (2D) AuNP/TiO 2 /Au absorber, the 3D moth-eye type absorber has higher absorption in entire 300–800 nm range. In accordance with this result, the 3D moth-eye absorber provides a photocurrent density of approximately 52.82 μA cm −2 , which is approximately 2.3 times higher than that of the flat 2D TiO 2 /Au thin film (22.96 μA cm −2 ). Notably, it exhibits extraordinary enhancement of the photocurrent density—from 1.5 to 22.51 μA cm −2 —in the visible range (≥420 nm).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Solar-Powered Water Purification Methods · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
2. TiO2 photocatalysis: design and applications10.1016/j.jphotochemrev.2012.06.001 ↗
3. Mesoporous TiO2: comparison of classical sol−gel and nanoparticle based photoelectrodes for the water splitting reaction10.1021/nn1004765 ↗
4. Water splitting by nanocrystalline TiO2 in a complete photoelectrochemical cell exhibits efficiencies limited by charge recombination10.1021/jp909993w ↗
5. Hydrogen production by photocatalytic water splitting over Pt/TiO2 nanosheets with exposed (001) facets10.1021/jp104488b ↗
6. A review and recent developments in photocatalytic water-splitting using TiO2 for hydrogen production10.1016/j.rser.2005.01.009 ↗
7. Photocatalytic water splitting using Pt-loaded visible light-responsive TiO2 thin film photocatalysts10.1016/j.cattod.2006.07.043 ↗
8. Efficient photochemical water splitting by a chemically modified n-TiO210.1126/science.1075035 ↗
9. Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting10.1021/nl201766h ↗
10. Solar water splitting by TiO2/CdS/Co–Pi nanowire array photoanode enhanced with Co–Pi as hole transfer relay and CdS as light absorber10.1002/adfm.201502461 ↗
11. Optimization of 1D ZnO@ TiO2 core–shell nanostructures for enhanced photoelectrochemical water splitting under solar light illumination10.1021/am501379m ↗
12. WO3-enhanced TiO2 nanotube photoanodes for solar water splitting with simultaneous wastewater treatment10.1021/am403369p ↗
13. A fully integrated nanosystem of semiconductor nanowires for direct solar water splitting10.1021/nl401615t ↗
14. High photoelectrochemical water splitting performance on nitrogen doped double-wall TiO2 nanotube array electrodes10.1016/j.ijhydene.2011.08.014 ↗
15. Novel carbon-doped TiO2 nanotube arrays with high aspect ratios for efficient solar water splitting10.1021/nl051807y ↗
16. Facile fabrication of hierarchical TiO2 nanobelt/ZnO nanorod heterogeneous nanostructure: an efficient photoanode for water splitting10.1021/am402154k ↗
17. Plasmonic photoanodes for solar water splitting with visible light10.1021/nl302796f ↗
18. Janus Au‐TiO2 photocatalysts with strong localization of plasmonic near‐fields for efficient visible‐light hydrogen generation10.1002/adma.201104241 ↗
19. Plasmonic solar water splitting10.1039/C1EE02875H ↗
20. Dendritic Au/TiO2 nanorod arrays for visible-light driven photoelectrochemical water splitting10.1039/c3nr02766j ↗
21. Gap-plasmon based broadband absorbers for enhanced hot-electron and photocurrent generation10.1038/srep30650 ↗
22. Coupling surface plasmon resonance of gold nanoparticles with slow-photon-effect of TiO2 photonic crystals for synergistically enhanced photoelectrochemical water splitting10.1039/c3ee43278e ↗
23. Constructing a AZO/TiO2 core/shell nanocone array with uniformly dispersed Au NPs for enhancing photoelectrochemical water splitting10.1002/aenm.201501496 ↗
24. Au nanostructure-decorated TiO2 nanowires exhibiting photoactivity across entire UV-visible region for photoelectrochemical water splitting10.1021/nl4018385 ↗
25. Rough gold films as broadband absorbers for plasmonic enhancement of TiO2 photocurrent over 400–800 nm10.1038/srep33049 ↗
26. Two-dimensional metal-dielectric hybrid-structured film with titanium oxide for enhanced visible light absorption and photo-catalytic application10.1016/j.nanoen.2016.01.004 ↗
27. Broadband absorption and efficient hot-carrier photovoltaic conversion based on sunlight-induced non-radiative decay of propagating surface plasmon polaritons10.1038/s41598-017-05399-6 ↗
28. Plasmon-enhanced photocatalytic activity of iron oxide on gold nanopillars10.1021/nn203457a ↗
29. Multi-functional SiO2 moth-eye pattern for photovoltaic applications10.1016/j.solmat.2014.03.002 ↗
30. A fabrication method of the silica-based moth-eye structures and its application to the organic light-emitting Diodes10.1149/1.3568880 ↗
31. Imprinted moth-eye antireflection patterns on glass substrate10.3365/eml.2009.03.039 ↗
32. Fabrication of moth-eye structure on p-GaN layer of GaN-based LEDs for improvement of light extraction10.1016/j.mseb.2009.05.018 ↗
33. Photocatalytic water splitting: recent progress and future challenges10.1021/jz1007966 ↗
34. Broadband moth-eye antireflection coating on silicon10.1063/1.2870080 ↗
35. Resonant light trapping in ultrathin films for water splitting10.1038/nmat3477 ↗
36. Plasmon enhanced internal photoemission in antenna-spacer-mirror based Au/TiO2 nanostructures10.1021/acs.nanolett.5b01070 ↗
37. Metamaterial perfect absorber based hot electron photodetection10.1021/nl501090w ↗
38. Nanoimprint lithography
39. Hillock formation by surface diffusion on thin silver films10.1016/0039-6028(72)90229-4 ↗
40. Plasmon-induced resonance energy transfer for solar energy conversion10.1038/nphoton.2015.142 ↗
41. Controlling plasmon-induced resonance energy transfer and hot electron injection processes in metal@TiO2 core-shell nanoparticles10.1021/acs.jpcc.5b03955 ↗
42. Distinguishing between plasmon-induced and photoexcited carriers in a device geometry10.1038/ncomms8797 ↗
43. Schottky contact surface-plasmon detector integrated with an asymmetric metal stripe waveguide10.1063/1.3171937 ↗